PRG-MUL2

INVENTRONICS Inc.
PRG-MUL2 Programmer for drivers and controllers Rev .A Description • Supports DALI interface driver Programming • Supports 0-10V Programmable Driver Programming • Supports Other Controllers (TDD-ANPNx,SDD-AAPNx) • Off-line programming capability • Auto programming Mode • Selectable tools for mass programming Model Name Description nd Multi programmer 2 Model Number Generatio...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Тип аксессуара
Серии совместимых моделей
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
PRG-MUL2 Programmer for drivers and controllers Rev .A Description • Supports DALI interface driver Programming • Supports 0-10V Programmable Driver Programming • Supports Other Controllers (TDD-ANPNx,SDD-AAPNx) • Off-line programming capability • Auto programming Mode • Selectable tools for mass programming Model Name Description nd Multi programmer 2 Model Number Generation Multiple Programmer PRG-MUL2 Interface Specifications Parameters Min. Typ. Max. 9.8 V 12 V 13.2 V Auxiliary Supply Voltage 0 - 20 mA Auxiliary Supply Current (Red LED,Green LED)Voltage 1.6V - 3V Voltage of External LED indicator (Red LED,Green LED)Current 0 - 10mA Current of External LED indicator (Push Button)Voltage - - 3.3V Voltage of External Push button (Buzzer)Voltage - - 5V Voltage of External Buzzer (Buzzer)Current - 30mA - Current of External Buzzer Vaux Voltage Vaux Source Current 5V USB power consumption 300mA Note Use USB charger or PC USB Function Description z Off-line Programming At PC end, the upper software can download the configuration to the programmer, then only 5V power supply is needed to program the drivers or controllers. z Automatic Programming When this function is enabled, after connecting the programming leads to the programmer, it will download the configuration to the controller or driver. Long Push Button(5s<T<10s), the Automatic function will be disabled or enabled. When the function has been turned on, the Red LED will flicker 2 times, each time lasts 0.5 second. When the function has been turned off, the Green LED will flicker 2 times, each time lasts 0.5 second. z Buzzer The programmer provides a port for connecting to an external Buzzer if needed. 1/5 Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com PDF
Документация на PRG-MUL2 

Microsoft Word - DS-PRG-MUL2 Rev.A

Дата модификации: 16.04.2015

Размер: 396.2 Кб

5 стр.

    Публикации 2

    показать свернуть
    11 мая 2017
    статья

    Как запрограммировать LED-драйверы MEAN WELL и Inventronics?

    Организация димминга без дополнительной линии управления, автоматическая компенсация старения светодиодов, плавное включение и выключение, принудительное включение режима максимального выходного тока и индикация времени оставшейся работы – все это... ...читать

    17 мая 2016
    новость

    Программируемые диммируемые LED драйверы для промышленных светильников

    Компания Inventronics разработала перепрограммируемые источники питания для светодиодных светильников наружного и промышленного освещения. Новые семейства источников питания EUG и EUD состоят из нескольких серий в диапазоне мощности 75–600... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.