TP10-2-SR

TP10 6MHz, 600μA, RRIO, Op Amps Features Description  Supply Voltage: 2.7V to 5.5V The TP10 series are CMOS dual, and quad RRIO op-amps with  Low Supply Current: 600μA per channel low offset, low power and stable high frequency response. They  Rail to Rail Input and Output  Bandwidth: 6 MHz  Slew Rate: 4.5V/μs  Excellent EMI Suppress Performance common-mode voltage range ...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SOP-8
Тип ОУ
Техническая особенность ОУ
Напряжение питания
Ток собственного потребления
Rail-to-Rail выводы
Программируемый коэффициент усиления
Частота единичного усиления
Максимальная скорость нарастания выходного сигнала
Уровень шума
Диапазон рабочих температур
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
TP10 6MHz, 600μA, RRIO, Op Amps Features Description  Supply Voltage: 2.7V to 5.5V The TP10 series are CMOS dual, and quad RRIO op-amps with  Low Supply Current: 600μA per channel low offset, low power and stable high frequency response. They  Rail to Rail Input and Output  Bandwidth: 6 MHz  Slew Rate: 4.5V/μs  Excellent EMI Suppress Performance common-mode voltage range extends 300mV beyond V– and  Offset Voltage: ±3mV Maximum V+, and the outputs swing rail-to-rail. The TP10 family can be  Offset Voltage Temperature Drift: 1 μV/°C used as plug-in replacements for many commercially available  Low Noise: 19 nV/√Hz at 1kHz op-amps to reduce power and improve input/output range and  High Output Capability: 100mA  –40°C to 125°C Operation Temperature Range  Green, Popular Type Package incorporate 3PEAK’s proprietary and patented design techniques to achieve very good AC performance with 6MHz bandwidth, 4.5V/μs slew rate and low distortion while drawing only 600μA of quiescent current per amplifier. The input performance. The combination of features makes the TP10 ideal choices for motor control and portable audio amplification, sound ports, and other consumer Audio. The TP10 Op-amp is very stable, and it  TP10-2: SOP-8  TP10-4: SOP-14 is capable of driving heavy capacitive loads such as those found in LCDs. The ability to swing rail-to-rail at the inputs and outputs enables designers to buffer CMOS DACs, ASICs, or other wide Applications  E-Bike  Motor Control  Portable Audio output swing devices in single-supply systems. Pin Configuration TP10-4 TP10-2 14-Pin SOIC/TSSOP 8-Pin SOIC/MSOP -S Suffixes -S Suffixes Out A 1 ﹣In A 2 ﹢In A 3 ﹣Vs 4 A B 8 ﹢Vs 7 Out B 6 ﹣In B 5 ﹢In B Out A 1 14 Out D ﹣In A 2 13 ﹣In D A ﹢In A 3 12 ﹢In D ﹢Vs 4 11 ﹣Vs ﹢In B 5 10 ﹢In C B www.3peakic.com.cn 1 / 17 D C ﹣In B 6 9 ﹣In C Out B 7 8 Out C Rev.0.02 PDF
Документация на серию TP10 

Дата модификации: 27.01.2022

Размер: 921.5 Кб

17 стр.

TP10 6MHz, 600μA, RRIO, Op Amps Features Description  Supply Voltage: 2.7V to 5.5V The TP10 series are CMOS dual, and quad RRIO op-amps with  Low Supply Current: 600μA per channel low offset, low power and stable high frequency response. They  Rail to Rail Input and Output  Bandwidth: 6 MHz  Slew Rate: 4.5V/μs  Excellent EMI Suppress Performance common-mode voltage range extends 300mV beyond V– and  Offset Voltage: ±3mV Maximum V+, and the outputs swing rail-to-rail. The TP10 family can be  Offset Voltage Temperature Drift: 1 μV/°C used as plug-in replacements for many commercially available  Low Noise: 19 nV/√Hz at 1kHz op-amps to reduce power and improve input/output range and  High Output Capability: 100mA  –40°C to 125°C Operation Temperature Range  Green, Popular Type Package incorporate 3PEAK’s proprietary and patented design techniques to achieve very good AC performance with 6MHz bandwidth, 4.5V/μs slew rate and low distortion while drawing only 600μA of quiescent current per amplifier. The input performance. The combination of features makes the TP10 ideal choices for motor control and portable audio amplification, sound ports, and other consumer Audio. The TP10 Op-amp is very stable, and it  TP10-2: SOP-8  TP10-4: SOP-14 is capable of driving heavy capacitive loads such as those found in LCDs. The ability to swing rail-to-rail at the inputs and outputs enables designers to buffer CMOS DACs, ASICs, or other wide Applications  E-Bike  Motor Control  Portable Audio output swing devices in single-supply systems. Order Information Operating Temperature Order Number Package Marking Information MSL Transport Media, Quantity Range TP10-2-SR -40 to 125°C 8-Pin SOP TP102 3 Tape and Reel, 4000 TP10-4-SR -40 to 125°C 14-Pin SOP TP104 3 Tape and Reel, 2500 www.3peakic.com.cn 1 / 14 Rev.0 PDF
Документация на TP10-2-SR 

Дата модификации: 21.12.2017

Размер: 980.5 Кб

14 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.