ADUM4221-2CRIZ-RL

Data Sheet Isolated, Half Bridge Gate Drivers with Adjustable Dead Time, 4 A Output ADuM4221/ADuM4221-1/ADuM4221-2 FEATURES GENERAL DESCRIPTION 4 A peak current (<2 Ω RDSON_x) 2.5 V to 6.5 V logic input voltage 4.5 V to 35 V output supply voltage UVLO VDD1 positive going threshold: 2.5 V maximum Multiple UVLO options for VDDA and VDDB positive going threshold Grade A: 4.5 V maximum Grade...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Корпус
Кол-во нижних каналов
Кол-во верхних каналов
Максимальное напряжение смещения
Максимальный выходной ток нарастания
Максимальный выходной ток спада
Напряжение изоляции
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
Data Sheet Isolated, Half Bridge Gate Drivers with Adjustable Dead Time, 4 A Output ADuM4221/ADuM4221-1/ADuM4221-2 FEATURES GENERAL DESCRIPTION 4 A peak current (<2 Ω RDSON_x) 2.5 V to 6.5 V logic input voltage 4.5 V to 35 V output supply voltage UVLO VDD1 positive going threshold: 2.5 V maximum Multiple UVLO options for VDDA and VDDB positive going threshold Grade A: 4.5 V maximum Grade B: 7.5 V maximum Grade C: 11.6 V maximum Precise timing characteristics 44 ns maximum propagation delay Adjustable dead time and dual input (ADuM4221) Adjustable dead time and single input (ADuM4221-1) No dead time control and dual input (ADuM4221-2) CMOS input logic levels High common-mode transient immunity: 150 kV/μs High junction temperature operation: 125°C Default low output Safety and regulatory approvals (pending) UL recognition per UL 1577 5700 V rms for 1 minute duration CSA Component Acceptance Notice 5A VDE certificate of conformity DIN V VDE V 0884-11: VIORM = 849 V peak Increased creepage wide body, 16-lead SOIC_IC The ADuM4221/ADuM4221-1/ADuM4221-2 are 4 A isolated, half bridge gate drivers that employ the Analog Devices, Inc., iCoupler® technology to provide independent and isolated high-side and low-side outputs. The ADuM4221/ADuM4221-1/ ADuM4221-2 provide 5700 V rms isolation in an increased creepage wide body, 16-lead SOIC_IC. Combining high speed CMOS and monolithic transformer technology, these isolation components provide outstanding performance characteristics superior to the alternatives, such as the combination of pulse transformers and gate drivers. APPLICATIONS Switching power supplies Isolated IGBT/MOSFET gate drives Industrial inverters Gallium nitride (GaN)/silicon carbide (SiC) compatible 1 The isolators operate with a logic input voltage ranging from 2.5 V to 6.5 V, providing compatibility with lower voltage systems. In comparison to gate drivers employing high voltage level translation methodologies, the ADuM4221/ADuM4221-1/ ADuM4221-2 offer the benefit of true, galvanic isolation between the input and each output. The ADuM4221/ADuM4221-1 each have built in overlap protection and allow dead time adjustment. A single resistor between the dead time pin (DT) and the GND1 pin sets the dead time on the secondary side between the high-side and the low-side outputs. The ADuM4221-2 does not have overlap protection nor dead time control. An internal thermal shutdown (TSD) sets outputs low if the internal temperature on the ADuM4221/ADuM4221-1/ ADuM4221-2 exceeds the TSD temperature. As a result, the ADuM4221/ADuM4221-1/ADuM4221-2 provide reliable control over the switching characteristics of the insulated gate bipolar transistor (IGBT)/metal-oxide semiconductor field effect transistor (MOSFET) configurations over a wide range of positive or negative switching voltages. Protected by U.S. Patents 5,952,849; 6,873,065; 7,075,239. Other patents pending. Rev. B Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2020 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com PDF
Документация на серию ADUM4221 

ADuM4221/ADuM4221-1/ADuM4221-2 (Rev. B) Isolated, Half Bridge Gate Drivers with Adjustable Dead Time, 4 A Output

Дата модификации: 28.09.2020

Размер: 1.46 Мб

24 стр.

    Публикации 1

    показать свернуть
    08 июня 2021
    новость

    Изолированные драйверы затвора ADuM4221 от Analog Devices

    Компания Analog Devices выпустила на рынок новые изолированные драйверы затвора ADuM4221 с максимальным выходным током 4 А, предназначенные, в первую очередь, для управления высокоскоростными карбид–кремниевыми (SiC) и... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.