F971E155MBA

Конденсатор танталовый 25 В, 1.5 мкФ ±20%, корпус WRAPAROUND, -55...125 °C
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Номинальное напряжение
Номинальная ёмкость
Допуск ёмкости
Код корпуса
Рабочая температура
Ток утечки
Тангенс угла диэлектрических потерь
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 1

показать свернуть
Тип Наименование Корпус Упаковка i Напряжение Ёмкость Допуск Корпус T раб Ток утечки tanD ESR Пульсации Монтаж Особенности Карточка
товара
A+ 595D155X9025A2T (VISHAY)
 

Файлы 1

показать свернуть
SOLID TANTALUM ELECTROLYTIC CAPACITORS F97 Resin-molded Chip, High Reliability (High temperature / moisture resistance) Series Specifications Item Compliant to the RoHS directive (2002/95/EC). --55 to +125˚C (Rated temperature : 85˚C.) Capacitance Tolerance ± 20%, ± 10% (at 120Hz) Dissipation Factor Refer to next page ESR (100kHz) Refer to next page Leakage Current∗ • After 1 minute' s application of rated voltage,leakage current at 20˚C is not more than 0.01CV or 0.5 µA, whichever is greater. • After 1 minute' s application of rated voltage,leakage current at 85˚C is not more than 0.1CV or 5µA,whichever is greater. • After 1 minute' s application of derated voltage,leakage current at 125˚C is not more than 0.125CV or 6.3 µA,whichever is greater. Capacitance Change by Temperature +15% Max. (at +125˚C) +10% Max. (at +85˚C) --10% Max. (at --55˚C) Damp Heat (Steady State) At 85˚C, 85% R.H.,For 1000 hours (No voltage applied) Capacitance Change • • • • • • Within ±10% of the initial value Dissipation Factor • • • • • • • • • • • Initial specified value or less Leakage Current • • • • • • • • • • • • 125% or less than the initial specified value Load Humidity After 500 hour' s application of rated voltage in series with a 33Ω resistor at 60˚C, 90 to 95% R.H.,capacitors meet the characteristics requirements listed below. Capacitance Change • • • • • • Within ±10% of the initial value Dissipation Factor • • • • • • • • • • Initial specified value or less Leakage Current • • • • • • • • • • • • 125% or less than the initial specified value Temperature Cycles At --55˚C / +125˚C,For 30 minutes each,1000 cycles Capacitance Change • • • • • • Within ± 5% of the initial value Dissipation Factor • • • • • • • • • • • Initial specified value or less Leakage Current • • • • • • • • • • • • • Initial specified value or less Resistance to Soldering Heat At 260˚C,reflowing capacitors for 10 seconds Max. Capacitance Change • • • • • • Within ± 5% of the initial value Dissipation Factor • • • • • • • • • • • Initial specified value or less Leakage Current • • • • • • • • • • • • • Initial specified value or less Solderability After immersing capacitors completely into a solder pot at 245˚C for 2 to 3 seconds,more than 3/4 of their electrode area shall remain covered with new solder. Type numbering system (Example : 16V 3.3µF) 1 2 3 4 5 6 7 8 9 10 11 F 9 7 1 C 3 3 5 M B Taping code (Refer to page 309 for details) Case code Capacitance tolerance Rated capacitance Rated voltage Series Drawing A • B Case C • N Case L W1 L W1 H H W2 S W2 S S Surge∗ S Dimensions Case code (mm) L 3.2 3.5 6.0 7.3 A B C N W1 1.6 2.8 3.2 4.3 ± 0.2 ± 0.2 ± 0.2 ± 0.2 W2 1.2 2.2 2.2 2.4 ± 0.2 ± 0.2 ± 0.2 ± 0.2 ± 0.1 ± 0.1 ± 0.1 ± 0.1 H 1.6 1.9 2.5 2.8 ± 0.2 ± 0.2 ± 0.2 ± 0.2 Marking Endurance∗ S 0.8 ± 0.2 0.8 ± 0.2 1.3 ± 0.2 1.3 ± 0.2 Shear Test Month code B Case N Case 10 16r 3.3 16r C105 C Case 47 10r A Case Month code Rated Voltage (V) Rated Capacitance (Capacitance code ) Rated voltage (V) Rated Capacitance (µF) Terminal Strength After application of surge in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF,for 1000 successive test cycles at 85˚C,capacitors meet the characteristics requirements listed below. Capacitance Change • • • • • • Within ± 5% of the initial value Dissipation Factor • • • • • • • • • • • Initial specified value or less Leakage Current • • • • • • • • • • • • • Initial specified value or less After 2000 hours' application of rated voltage in series with a 3Ω resistor at 85˚C,or derated voltage in series with a 3Ω resistor at 125˚C,capacitors meet the characteristic requirements listed below. Capacitance Change • • • • • • Within ±10% of the initial value Dissipation Factor • • • • • • • • • • • Initial specified value or less Leakage Current • • • • • • • • • • • • • Initial specified value or less After applying the pressure load of 5N for 10 ± 1 seconds horizontally to the center of capacitor side body which has no electrode and has been 5N (0.51kg • f) soldered beforehand on an aluminum For 10 ± 1 seconds substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of the capacitor, the pressure strength is applied with a 20 specified jig at the center of the R230 substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no 45 45 remarkable abnormality on the capacitor terminals. 1mm Rated voltage (Voltage code) Performance Characteristics Category Temperature Range ∗ As for the surge and derated voltage at 125˚C, refer to page 308 for details. Standard ratings V Cap.(µF) 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Code 334 474 684 105 155 225 335 475 685 106 156 226 336 476 686 107 6.3 0J A* A A A • B B* B A • B (A) • C B • C N N 10 1A A* A A A • B B A • B C* A • B (B) • C • N (C) • N (N) 16 1C A* A A A • B* A • B B A • B • C (B) • C B • C • N (B) • (C) • N N 20 1D A A A A • B* B A • B (B) • C (B) • C N (C) • N 25 1E A* A A B* (A) • B B (B) • C C C • N (C) • N 35 1V A* A A (A) • B * (A) • B B (B) • C C (C) • N N ( ) The series in parentheses are being developed. Please contact to your local Nichicon sales office when these series are being designed in your application. which are scheduled to be discontinued. * : Products Not recommended for new designs. CAT.8100Y-1 PDF
Документация на F971C335MBA 

Дата модификации: 07.04.2010

Размер: 138.2 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.