SENSOR, MASS AIR FLOW; Range, Measuring:0 to 1000 sccm; Centres, Fixing:34mm; Hysteresis:+ 1% reading; Length / Height, External:30.2mm; Power Consumption:60mW; Series:AWM40000; Temp, Op. Max:85°C; Temp, Op. Min:-25°C; Voltage, Output:54.7V; Voltage, Supply:10V dc; Width, External:30.5mm
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Диапазон измерения
Размер 30.5×30.2×12.7 мм
Рабочая температура
Примечания Microbridge Mass Airflow/Unamplified and Amplified
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
AWM40000 SERIES 008345 Issue 2 Airflow Sensors, Amplified, and Unamplified DESCRIPTION The AWM40000 Series Airflow Sensors are based on proven microbridge technology and include both unamplified sensor-only devices and amplified signal conditioned devices. The microbridge mass airflow sensor operates on the theory of heat transfer. Mass airflow is directed across the surface of the sensing elements. Output voltage varies in proportion to the mass air or other gas flow through the inlet and outlet ports of the package. This sensor has a unique silicon chip based on advanced microstructure technology. It consists of a thin film, thermally-isolated bridge structure containing heater, and temperature sensing elements. The bridge structure provides a sensitive and fast response to the flow of air or other gas over the chip. Dual sensing elements positioned on both sides of a central heating element indicate flow direction as well as flow rate. The specially-designed housing precisely directs and controls the airflow across the microstructure sensing element. Mechanical design of the package allows it to be easily mounted to printed circuit boards. Laser-trimmed, thick film and thin film resistors provide consistent interchangeability from one device to the next. The microbridge mass airflow sensor uses temperature sensitive resistors deposited within a thin film of silicon nitride. They are suspended in the form of two bridges over an etched cavity in the silicon. The chip is located in a precisely dimensioned airflow channel to provide a repeatable flow response. Highly effective, thermal isolation for the heater and sensing resistors is attained by etching the cavity space beneath the flow sensor bridges. The small size and thermal isolation of the microbridge mass airflow sensor are responsible for the extremely fast response and high sensitivity to flows. Dual Wheatstone bridges control airflow measurement–one provides closed loop heater control, the other contains the dual sensing elements. The heater circuit minimizes shift due to ambient temperature changes by providing an output proportional to mass flow. The circuit keeps the heater temperature at a constant differential (160°C) above ambient air temperature which is sensed by a heat-sunk resistor on the chip. The ratiometric voltage output of the device corresponds to the differential voltage across the Wheatstone bridge circuit. The unamplified versions require both the heater control circuit (Fig. 2) and the sensing bridge supply circuit (Fig. 3) for operation per specification. These two circuits are not on board the sensor and must be supplied in the application. The differential amplifier circuitry (Fig. 4) may be useful in providing output gain and/or introducing voltage offsets to the sensor output (Fig. 5). The amplified versions can be used to increase output gain and introduce voltage offsets. The circuits shown in Figs. 2, 3, and 4 are all provided onboard. POTENTIAL APPLICATIONS • • Medical Respirators and ventilators Oxygen concentrators and conservers Anesthesia machines Industrial HVAC damper control Gas analyzers Low vacuum control Process control Leak detection equipment Vent hoods Gas metering Chromatography FEATURES • Precision silicon micromachining • Sensitivity to low flows (0.1 SCCM to 6 SLPM) • Adaptable for use with higher flows • Low power consumption allows for use in portable devices and batterypowered applications • Analog output • Standard 2,54 mm [0.10 in] mounting centers • Laser-trimmed interchangeability • Accurate sensing of low pressure To view the entire mass airflow product portfolio, click here. PDF
Документация на AWM42300V 

Quadrature Speed and Direction Sensors, SNG-Q Series Datasheet Honeywell’s SNG-Q Series Quadrature Speed and Direction Sensors are designed to provide both speed and direction information. Speed information is provided from digital squar...

Дата модификации: 03.05.2021

Размер: 770.8 Кб

6 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.