AWM5104VA

Airflow Sensors High Flow Mass Airflow/Amplified AWM5000 Series FEATURES 1 Linear voltage output 1 Venturi design 1 Remote mounting capability 1 Active laser trimming improves interchange ability 1 Separate gas calibration types: – Ar (argon) – N2 (nitrogen) or – CO2 (carbon dioxide) In-Line Flow Measurement AWM5000 Series Microbridge Mass Airflow Sensors feature a venturi type flow housing. ...
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Диапазон измерения
Размер 162.8×35.6×32.6 мм
Рабочая температура
Примечания High Flow Mass Airflow/Amplified
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
Airflow Sensors High Flow Mass Airflow/Amplified AWM5000 Series FEATURES 1 Linear voltage output 1 Venturi design 1 Remote mounting capability 1 Active laser trimming improves interchange ability 1 Separate gas calibration types: – Ar (argon) – N2 (nitrogen) or – CO2 (carbon dioxide) In-Line Flow Measurement AWM5000 Series Microbridge Mass Airflow Sensors feature a venturi type flow housing. They measure flow as high as 20 standard liters per minute (SLPM) while inducing a maximum pressure drop of 2.25N H2O. The microbridge chip is in direct contact with the flow stream, greatly reducing error possibilities due to orifice or bypass channel clogging. Figure 1 Rugged, Versatile Package The rugged plastic package has been designed to withstand common mode pressures up to 50 psi, and the small sensing element allows 100 gs of shock without compromising performance. The included ‘‘AMP’’ compatible connector provides reliable connection in demanding applications. Figure 2 Honeywell 1 Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada Airflow On-board Signal Conditioning Each AWM5000 sensor contains circuitry which performs amplification, linearization, temperature compensation, and gas calibration. Figure 1 (Heater Control Circuit) and Figure 2 (Sensor Bridge Circuit and Amplification Linearization Circuit) illustrate the on-board electrical circuitry for the AWM5000 Series. A 1 to 5 VDC linear output is possible for all listings regardless of flow range (5, 10, 15, or 20 SLPM) or calibration gas (nitrogen, carbon dioxide, nitrous oxide, or argon). All calibration is performed by active laser trimming. 79 PDF
Документация на серию AWM5000 

AWM5000 Series High Flow Airflow, Amplified

Дата модификации: 03.12.2020

Размер: 285.6 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.