IRAMS10UP60A

DRIVER, POWER MODULE, 10A 600V,10UP60; Driver IC Type:Motor; Outputs, No. of:3; Voltage, Output:450V; Current, Output:10A; Voltage, Supply Min:12V; Case Style:Standard Pin Leadforming Option; Pins, No. of:23; Temperature, Operating Range:-40°C to +150°C; Base Number:10; Frequency:20kHz; IC Generic Number:10UP60; Logic Function Number:60; Temp, Op. Max:150°C; Temp, Op. Min:-40°C; Termination Type:Through Hole; Voltage, Output Max:600V; Voltage, Supply Max:20V; Current, Output Max:10A
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Внутренняя схема
Кол-во ключей в модуле
Напряжение К-Э
Рабочий ток при 25°C
Технология кристалла
Примечания IC MOD PWR INTELLIGENT 10A 600V
Корпус SIP23
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 1

показать свернуть
Тип Наименование Корпус Упаковка i Схема Ключей Напряжение Ток Технология Примечания Ток пик Мощность Карточка
товара
P= STK544UC62K-E (ONS) SIP23 в линейках 8 шт
 

Файлы 2

показать свернуть
PD-94640 RevI Plug N DriveTM Integrated Power Module for Appliance Motor Drive IRAMS10UP60A Series 10A, 600V Description International Rectifier's IRAMS10UP60A is an Integrated Power Module developed and optimized for electronic motor control in appliance applications such as washing machines and refrigerators. Plug N Drive technology offers an extremely compact, high performance AC motor-driver in a single isolated package for a very simple design. A built-in temperature monitor and over-temperature/over-current protection, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. The integration of the bootstrap diodes for the high-side driver section, and the single polarity power supply required to drive the internal circuitry, simplify the utilization of the module and deliver further cost reduction advantages. Features • Integrated Gate Drivers and Bootstrap Diodes. • Temperature Monitor • Temperature and Overcurrent shutdown • Fully Isolated Package. • Low VCE (on) Non Punch Through IGBT Technology • Under-voltage lockout for all channels • Matched propagation delay for all channels • Low side IGBT emitter pins for current conrol • Schmitt-triggered input logic • Cross-conduction prevention logic • Lower di/dt gate driver for better noise immunity • Recognized by UL (E252584), RoHS Compliant Absolute Maximum Ratings Parameter VCES Description Maximum IGBT Blocking Voltage Max. Value 600 V+ Positive Bus Input Voltage 450 IO @ TC= 25°C RMS Phase Current 10 IO @TC =100°C RMS Phase Current 5 Ipk Maximum Peak Phase Current (tp<100ms) 15 Units V A Fp Maximum PWM Carrier Frequency 20 kHz Pd Maximum Power dissipation per Phase 20 W Viso Isolation Voltage (1min) 2000 VRMS TJ (IGBT & Diodes) Operating Junction temperature Range -40 to +150 TJ (Driver IC) T Operating Junction temperature Range -40 to +150 www.irf.com Mounting torque Range (M3 screw) 0.8 to 1.0 °C Nm 1 PDF
Документация на серию IRAMS10UP60A 

Дата модификации: 08.01.2013

Размер: 710.5 Кб

17 стр.

Документация на IRAMS10UP60A 

PAGE 1.pmd

Дата модификации: 06.10.2007

Размер: 634.8 Кб

17 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.