Защитный диод - [DO-204AC, DO-15, Axial]; Pрасс(пик): 600 Вт; Uраб: 136 В; Uимп(макс): 230 В; Тип: Симм; Линий: 1
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Корпус DO15
Пиковая рассеиваемая мощность
Рабочее напряжение
Максимальное импульсное напряжение
Тип супрессора по свойствам
Количество линий ограничения
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
Transient Voltage Suppression Diodes Axial Leaded – 600W > P6KE series P6KE Series RoHS Description Bi-directional The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • VBR @TJ= VBR@25°C × (1+αT Uni-directional • ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) (αT: Temperature Coefficient) • EFT protection of data • Glass passivated chip lines in accordance with junction in DO-15 Package IEC 61000-4-4 (IEC801-4) • 600W peak pulse • Low incremental surge capability at 10/1000μs resistance waveform, repetition rate • Typical IR less than 1μA (duty cycles):0.01% above 13V • Fast response time: • High temperature typically less than 1.0ps soldering guaranteed: from 0 Volts to BV min 260°C/40 seconds / • Excellent clamping 0.375”,(9.5mm) lead capability length, 5 lbs., (2.3kg) • Typical failure mode is tension short from over-specified • Plastic package has voltage or current underwriters laboratory • Whisker test is conducted flammability classification based on JEDEC 94V-O JESD201A per its table 4a • Matte tin lead–free plated and 4c • Halogen free and RoHS • IEC-61000-4-2 ESD compliant 15kV(Air), 8kV (Contact) x (TJ - 25)) Agency Approvals AGENCY AGENCY FILE NUMBER E128662/E230531 Maximum Ratings and Thermal Characteristics (TA=25°C unless otherwise noted) Parameter Symbol Value Unit PPPM 600 W PD 5.0 W IFSM 100 A VF 3.5/5.0 V TJ , TSTG -55 to 150 °C Typical Thermal Resistance Junction to Lead RuJL 20 °C/W Typical Thermal Resistance Junction to Ambient RuJA 75 °C/W Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2) (Note 1) Steady State Power Dissipation on Inifinite Heat Sink at TL=75ºC (Fig. 6) Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 3) Operating Junction and Storage Temperature Range Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25°C per Fig. 2. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. _ 200V and VF< 5.0V for devices of VBR > _ 201V. 3. VF<3.5V for devices of VBR < Additional Information Functional Diagram Datasheet Bi-directional Cathode Anode Uni-directional © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/10/14 Resources Samples PDF
Документация на серию P6KE 

Дата модификации: 22.04.2014

Размер: 995.9 Кб

6 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.