SMF16A

Защитный диод - [SOD-123F]; Pрасс(пик): 200 Вт; Uраб: 16 В; Uимп(макс): 26 В; Iимп(макс): 7.7 А; Линий: 1
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Корпус SOD123FL
Пиковая рассеиваемая мощность
Рабочее напряжение
Напряжение ограничения (номинальное)
Напряжение ограничения (диапазон)
Максимальное импульсное напряжение
Ток утечки при рабочем напряжении
Максимальный импульсный ток
Тип супрессора по свойствам
Количество линий ограничения
  Примечание: Trans Voltage Suppressor Diode, 200W, 16V V(RWM), Unidirectional, 1 Element, Silicon
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 15

показать свернуть
Тип Наименование Корпус Упаковка i Pрасс Pрасс(пик) Uраб Uогр(ном) Uогр(диапазон) Uимп(макс) Iраб Iимп(макс) Тип Линий Cперех Примечание Карточка
товара
P= SMF16A_R1_00001 (PJ)
 
Trans Voltage Suppressor Diode, 200W, 16V V(RWM), Unidirectional, 1 Element, Silicon
A- SMBJ16A-AT/TR13 (YAG) DO-214AC DO-214AC (SMA) SMBJ, DO-214AA, 16V, 26V, AUTO, Reel 13"
A- SMCJ16A (YJ)
SMCJ16A (ONS-FAIR)
DO214AB 3000 шт
 
Trans Voltage Suppressor Diode, 1500W, 16V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB
A- SMDJ16A-AT/TR13 (YAG) DO-214AC DO-214AC (SMA) SMDJ, DO-214AB, 16V, 26V, AUTO, Reel 13"
A- SMDJ16A-AT/TR7 (YAG) DO-214AC DO-214AC (SMA) SMDJ, DO-214AB, 16V, 26V, AUTO, Reel 7"
A- SMDJ16A/TR13 (YAG) SMDJ, DO-214AB, 16V, 26V, Reel 13"
A- SJD12A16L01 (YAG) SOD123S 15000 шт TVS ESD, SOD-123S, 16V, 26V, Reel
A- SMAJ16A/TR13 (YAG) DO-214AC DO-214AC (SMA) SMAJ, DO-214AC, 16V, 26V, Reel 13"
A- SMBJ16A (YJ)
SMBJ16A/TR7 (YAG)
DO214AA в ленте 3000 шт Trans Voltage Suppressor Diode, 16V V(RWM), Unidirectional
A- SMBJ16CAR5G (TSC) Trans Voltage Suppressor Diode, 600W, 16V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AA
A- 5.0SMDJ16AHM6G (TSC) Trans Voltage Suppressor Diode, 5000W, 16V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB
A- VS16VUA1LAMTFTR (ROHM) DO-220AA (SMP)
 
Trans Voltage Suppressor Diode, 600W, 16V V(RWM), Unidirectional, 1 Element, Silicon
A- VS16VUA1LAMTR (ROHM) DO-220AA (SMP)
 
Trans Voltage Suppressor Diode, 600W, 16V V(RWM), Unidirectional, 1 Element, Silicon
A- SMAJ16A (GWS) 160 шт
 
Trans Voltage Suppressor Diode, 16V V(RWM), Unidirectional
A- SMAJ16A+ (MULTCMP) DO-214AC DO-214AC (SMA) Trans Voltage Suppressor Diode, 400W, 16V V(RWM), Unidirectional, 1 Element, Silicon

Файлы 2

показать свернуть
TVS Diodes Surface Mount – 200W > SMF Series SMF Series RoHS Pb e3 Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional SMF package is 50% smaller in footprint when compare to SMA package and deliverying one of the low height profiles (1.1mm) in the industry. Bi-directional Agency Approvals Agency Agnecy File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Peak Pulse Power Dissipation 8/20μs at TA=25ºC (Note 1) 10/1000μs (Note 2) PPPM Value 1000 200 Unit W Power Dissipation On Infinite Heat Sink at TL=50ºC PD 1 W Thermal Resistance Junction- to- Ambient RƟJA 220 °C/W Thermal Resistance Junction- to- Lead RƟJL 100 °C/W Operating Temperature Range TJ -65 to 150 °C TSTG -65 to 175 °C Storage Temperature Range Notes: 1. Non-repetitive current pulse, per Fig. 4 and derated above TJ (initial) =25ºC per Fig. 3. 2. SMF90A~SMF100A Peak Pulse Power Dissipation is 170W min, 200W typical @ 10/1000us Functional Diagram Bi-directional Cathode Anode Features •2  00W peak pulsepower capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01% •Compatible with industrial standard package SOD-123FL •L  ow profile: maximum height of 1.1mm. • Low inductance, excellent clamping capability •F  or surface mounted applications to optimize board space •H  igh temperature to reflow soldering guaranteed: 260°C/430sec • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) •E  SD protection of data lines in accordance with IEC 61000-4-2 • EFT protection of data lines in accordance with IEC 61000-4-4 • Fast response time: typically less than 1.0ns from 0 Volts to VBR min • Glass passivated junction • Built-in strain relief • Plastic package is flammability rated V-0 per UL 94 • Meet MSL level1, per J-STD-020, LF maximun peak of 260°C • Matte tin lead–free plated • Halogen-free and RoHS compliant • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD609A.01) • UL Recognized to UL 497B as an Isolated Loop Circuit Protector. Uni-directional Applications Additional Infomarion Datasheet Resources Samples SMF devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuit used in cellular phones, portable devices, business machines, power supplies and other consumer applications. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/15/20 PDF
Документация на SMF10A 

Дата модификации: 15.05.2020

Размер: 1020.9 Кб

6 стр.

Transient Voltage Suppression Diodes Surface Mount – 200W > SMF Series SMF Series RoHS Description Uni-directional The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. SMF package is 50% smaller in footprint when compare to SMA package and deliverying low height profile (1.1mm) in the industry. Features Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25°C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation at TA=25ºC by 10/1000µs (Note 1) PPPM 200 W Thermal Resistance Junction- toAmbient RTHJ-A 220 °C/W Thermal Resistance Junction- toLead RTHJ-L 100 °C/W Operating and Storage Temperature Range TJ,TSTG -55 to 150 °C Notes: 1. Non-repetitive current pulse, per Fig. 4 and derated above TA=25ºC per Fig. 3. • Compatible with industrial standard package SOD-123F • For surface mounted applications to optimize board space • Low profile: maximum height of 1.1mm. • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV (Air), 30kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) • EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) • Low inductance, excellent clamping capability • 200W peak pulsepower capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01% • Fast response time: typically less than 1.0ns from 0 Volts to VBR min •H  igh temperature soldering: 260°C/40 seconds at terminals • Glass passivated junction • Built-in strain relief •M  eet MSL level1, per J-STD-020, LF maximum peak of 260°C •M  atte tin lead–free plated • Halogen-free and RoHS compliant Functional Diagram Bi-directional Applications Cathode Anode Uni-directional SMF devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuit used in cellular phones, portable devices, business machines, power supplies and other consumer applications. Additional Information Datasheet © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/20/14 Resources Samples PDF
Документация на серию SMF 

Дата модификации: 21.01.2014

Размер: 1.2 Мб

6 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.