MAX11300EVKIT#

Evaluates: MAX11300 MAX11300 Evaluation Kit General Description The MAX11300 evaluation kit (EV kit) provides a proven design to evaluate the MAX11300 20-port programmable mixed-signal I/O with 12-bit ADC, 12-bit DAC, analog switches, and GPIO. The EV kit also includes Windows XP®-, Windows Vista®-, Windows® 7-, and Windows 8.0-/8.1-compatible software that provides a simple graphical user i...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Тип отладочного средства
Примечание Демонстрационный набор на микросхемы семейставаналоговая интегральная микросхема
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
Evaluates: MAX11300 MAX11300 Evaluation Kit General Description The MAX11300 evaluation kit (EV kit) provides a proven design to evaluate the MAX11300 20-port programmable mixed-signal I/O with 12-bit ADC, 12-bit DAC, analog switches, and GPIO. The EV kit also includes Windows XP®-, Windows Vista®-, Windows® 7-, and Windows 8.0-/8.1-compatible software that provides a simple graphical user interface (GUI) for exercising the features of the IC. The EV kit comes with a MAX11300GTL+ installed. Features and Benefits ●● 20 PIXITM Ports for Analog or Digital Control or Sensing ●● Two External Temperature Sensors (2N3904) ●● 50-Pin Signal Header (20 Ports, Two Temperatures, and Power Supplies) ●● SPI Interface Terminals Quick Start Required Equipment ●● EV kit (USB mini-B cable included) ●● Windows XP, Windows Vista, Windows 7, Windows 8.0, or Windows 8.1 PC, running .NET v4, with a spare USB port ●● ±12.5V DC at 500mA dual-output DC power supply ●● Digital voltmeter (DVM) Note: In the following sections, software-related items are identified by bolding. Text in bold refers to items directly from the EV kit software. Text in bold and underlined refers to items from the Windows operating system. Procedure The EV kit is fully assembled and tested. Follow the steps below to verify board operation: 1) Visit www.maximintegrated.com/evkitsoftware to download the latest version of the EV kit software, MAX11300EVKitSetupV1.1.zip. Save the EV kit software to a temporary folder and uncompress the ZIP file. 2) Install the EV kit software and USB driver on your computer by running the MAX11300EVKitSetupV1.0.exe program inside the temporary folder. The program files are copied to your PC and icons are created in the Windows Start | Programs menu. During software installation, some versions of Windows may show a warning message indicating that this software is from an unknown publisher. This is not an error condition and it is safe to proceed with installation. Administrator privileges are required to install the USB device driver on Windows. Note: The software requires .NET Framework v4. If this framework is not detected during installation, the installer launches dotNetFx40_Full_setup.exe to install it. Internet access may be required to install the .NET Framework v4 if it is not already installed. 3) Verify that all jumpers are in their default positions, as shown in Table 1, Table 2, Table 3, and Table 4. 4) Configure the power supply for ±12.5V DC output (typical load current is 50mA) (be sure to keep AVDDIO-AVSSIO within rated supply range). ●● Optional 2.5V On-Board Reference (MAX6071) ●● Windows XP-, Windows Vista-, Windows 7-, and Windows 8.0-/8.1-Compatible Software ●● USB-PC Connection (Cable Included) ●● RoHS Compliant ●● Proven Four-Layer PCB Layout ●● Fully Assembled and Tested Ordering Information appears at end of data sheet. Windows, Windows XP, and Windows Vista are registered trademarks and registered service marks of Microsoft Corporation. PIXI is a trademark of Maxim Integrated Products, Inc. Note: Active-low pin names such as INT are shown in the software and PCB layout with a B suffix (e.g., INTB). 19-7415; Rev 1; 1/15 PDF
Документация на MAX11300EVKIT# 

Дата модификации: 01.09.2015

Размер: 8.6 Мб

32 стр.

    Публикации 0

    показать свернуть

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.