USB2GPIO#

The Maxim USB2GPIO# board requires the Munich GUI which can be downloaded from Maxim's website free of charge. Key Features: * USB-to-I2C/SPI/GPIO Interface * Small PCB area * Pmod-Compatible Form Factor
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Тип отладочного средства
  Применение: Совместно с платами с поддержкой интерфейса Pmod, а также с изолирующей платой USB2GPIOISO
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
Evaluates: USB2GPIO USB2GPIO# Adapter Board General Description The USB2GPIO# adapter board is designed to work with Maxim’s Munich GUI and to connect to various EV kit or Pmod boards with Pmod™ compatible connectors for I2C/SPI/GPIO communication to test and evaluate different Maxim ICs. This document explains how the USB2GPIO# adapter board receives commands from a laptop through the USB to create an I2C/SPI/GPIO interface. The Maxim USB2GPIO# board requires the Munich GUI which can be downloaded from Maxim’s website free of charge. Features ●● USB-to-I2C/SPI/GPIO Interface ●● Small PCB area ●● Pmod-Compatible Form Factor The USB2GPIO# design is powered directly from the USB bus power (5V) and integrates two low-power, 1.2A, PWM step-down DC-DC converters (MAX1556) to provide programmable VCC voltages of 1.8V, 2.5V, 3.3V, or 5.0V. A dual, high-speed, USB-to-multipurpose UART/FIFO IC (FT2232HQ), high-speed USB switches (MAX4983), and a 4K MICROWIRE-compatible serial EEPROM are the other ICs on this adapter board. USB2GPIO# is designed to supersede USB2PMB1# and USB2PMB2# adapters and includes two connectors; connector X3 is a 12-pin connector which supports either I2C with 6 GPIO pins, or SPI with 4 GPIO pins, and is fully compatible with previous adapters and low-pin count EV kit or Pmod boards. This connector is controlled from the Munich GUI. The addition of another connector, X2, which is a 20-pin connector allows either 16 extra GPIO connections or a second SPI port and 12 extra GPIO connections. This 20-pin connector is NOT controlled by Munich GUI but is for use with future EV kits and will be controlled by the relevant EV kit GUIs. This USB2GPIO# adapter board can be used to enable USB-to-I2C/SPI interface for any Pmod-compatible plug-in peripheral modules such as the Maxim MAX14001PMB#, and MAXREFDES12 – Corona reference designs. In addition, it can be ordered together as an evaluation system (EV system) with different EV kits, such as MAX14001EVKIT#. Note that an “EV system” is an EV kit combined with an interface board, such as a USB2GPIO# and EV kit GUI software. Ordering information for EV systems is included in the EV kits’ corresponding data sheet. Refer to the appropriate EV kit data sheet for quick start and detailed operating instructions. The USB2GPIO# has been tested on Windows® 7, Windows 8, and Windows 10 system using Munich GUI, Version 2.17 or later. 319-100131; Rev 0; 1/18 Figure 1. USB2GPIO# Board Ordering Information appears at end of data sheet. Windows and Windows XP are registered trademarks and registered service marks of Microsoft Corporation. Pmod is a trademark of Digilent Inc. PDF
Datasheet на USB2GPIO# 

USB2GPIO# Adapter Board - Evaluates: USB2GPIO The USB2GPIO# adapter board is designed to work with Maxim’s Munich GUI and to connect to various EV kit or PMOD boards with Pmod™ compatible connector...

Дата модификации: 31.01.2019

Размер: 1.11 Мб

11 стр.

    Публикации 1

    показать свернуть
    30 сентября
    статья

    Промышленные цифровые входы и выходы. Руководство по проектированию. Часть 5. Организация защиты цифровых входов от помех

    В цикле статей Maxim Integrated о проектировании цифровых промышленных входов и выходов для приема сигналов дискретных датчиков/переключателей рассматривается возможность применения в этих разработках специализированных ИС Maxim. Подписаться на... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.