EV26Q64A

PIC18F06/16Q41 14/20-Pin, Low-Power, High-Performance Microcontroller with XLP Technology Introduction The PIC18-Q41 microcontroller family is available in 14/20-pin devices for sensor and real-time control applications. This analog-focused family features a 12-bit ADC with Computation (ADCC) automating Capacitive Voltage Divider (CVD) techniques for advanced capacitive touch sensing, averaging...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ядро
Платформа
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 3

показать свернуть
PIC18F06/16Q41 14/20-Pin, Low-Power, High-Performance Microcontroller with XLP Technology Introduction The PIC18-Q41 microcontroller family is available in 14/20-pin devices for sensor and real-time control applications. This analog-focused family features a 12-bit ADC with Computation (ADCC) automating Capacitive Voltage Divider (CVD) techniques for advanced capacitive touch sensing, averaging, filtering, oversampling and threshold comparison, two 8-bit DAC modules and an Operational Amplifier. The family showcases a 16-bit PWM module that provides dual independent outputs on the same time base. Additional features include vectored interrupt controller with fixed latency for handling interrupts, system bus arbiter, Direct Memory Access (DMA) capabilities, UART with support for asynchronous, DMX, DALI and LIN protocols, SPI, I2C, and a programmable 32-bit CRC with Memory Scan. This family also includes memory features such as Memory Access Partition (MAP) to support users in data protection and bootloader applications, as well as Device Information Area (DIA) that stores factory calibration values to help improve temperature sensor accuracy. PIC18-Q41 Family Types Peripheral Module Disable Windowed Watchdog Timer Direct Memory Access (DMA) UART/ UART with Protocol Support Signal Measurement Timer 2/1 1 2/1 2/1 4 Y Y Y Y Y 1 2/1 1 2/1 2/1 4 Y Y Y Y Y Device © 2020 Microchip Technology Inc. Preliminary Datasheet DS40002214C-page 1 Temperature Indicator 1 2 Vectored Interrupts 2 17 32-Bit CRC with Scanner 11 4 SPI / I2C 4 1 High-Low Voltage Detect 1 1 Comparator/ Zero-Cross Detect 1 1 Operational Amplifier 1 3/1 8-Bit DAC 3/1 2/3 Configurable Logic Cell 2/3 18/Y 12-Bit ADCC (channels) 12/Y Y/Y Numerically Controlled Oscillator Y/Y 512 16-Bit Dual PWM/ CCP 512 4096 8-Bit Timer with HLT/ 16-Bit Timers 4096 64k I/O Pins/ Peripheral Pin Select Memory Access Partition/ Device Information Area 64k PIC18F16Q41 Data SRAM (bytes) PIC18F06Q41 Program Memory Flash (bytes) Data EEPROM (bytes) Complimentary Waveform Generator Table 1. Devices included in this data sheet PDF
Документация на серию PIC18F16Q41 

PIC18F06/16Q41 Data Sheet

Дата модификации: 16.10.2020

Размер: 10.95 Мб

948 стр.

8-bit MCUs PIC18-Q41 Product Family Microcontrollers for Improved Sensor Interface Designs Summary The PIC18-Q41 family of Microcontrollers (MCUs) combines sophisticated analog peripherals and powerful Core Independent Peripherals (CIPs) for small, high-performance data acquisition and sensor interfacing applications. Available in small 14- and 20-pin packages, these MCUs are equipped with an Operational Amplifier (OPA), a 12-bit Analog-to-Digital Converter with Computation (ADCC), and 8-bit Digitalto-Analog Converters (DACs) providing a high level of analog integration for amplification, filtering and signal conditioning. With our comprehensive development tool suite, you can easily configure peripherals and functions, generate application code and simulate analog circuits prior to hardware prototyping reducing your development time and time to market. PIC18-Q41 MCUs are well suited for IoT edge nodes, medical, wearables, LED lighting, home automation, automotive and industrial process control. If a cost-effective MCU with comparable performance is needed, PIC18-Q40 MCUs are a good option. Intelligent Sensing Capabilities The PIC18-Q41 family integrates intelligent analog peripherals for amplification, filtering and signal conditioning used in sensing and measurement applications. They include an OPA, Zero Cross Detect (ZCD), comparators, two 8-bit DACs and a 12bit ADC with Computation that automates Capacitive Voltage Divider (CVD) techniques for implementing advanced touch sensing, averaging, filtering, oversampling and automatic threshold comparison. These features significantly reduce the component count in the analog signal chain. Improved System Response The CIPs enable the MCU to accomplish tasks in hardware while freeing up the CPU to accomplish other complex tasks or go to sleep to save power. This decreases system complexity by eliminating additional code and external components, reduces power consumption, allowing for deterministic response time and decreased validation time. www.microchip.com/8bit Customizable Hardware The need for external components is further reduced with the Configurable Logic Cell (CLC). The CLC peripheral lets you specify combinations of signals as inputs to a logic function and internally connects peripherals such as timers, Pulse-Width Modulators (PWMs), serial ports and I/O pins for hardware customization with unprecedented ease. The CLC enables a higher level of integration without any external components, thus reducing PCB footprint and system costs. Faster Time to Market To reduce your time to market, the PIC18-Q41 family has been designed to integrate with MPLAB® Code Configurator (MCC) and MPLAB Mindi™ Analog Simulator for a seamless embedded development experience. MCC is a free, graphical programming environment that quickly generates application code. Using an intuitive interface, it enables and configures a rich set of peripherals and functions specific to your application. MPLAB Mindi Analog Simulator reduces circuit design time and design risk by simulating analog circuits prior to hardware prototyping. www.microchip.com/MPLAB. PDF
Документация на семейство PIC18F-Q41 

Дата модификации: 22.09.2020

Размер: 498.5 Кб

2 стр.

    Публикации 1

    показать свернуть
    19 ноября
    новость

    PIC18F-Q41 – первая серия контроллеров в компактном корпусе с операционным усилителем

    Американский производитель Microchip выпустил новую серию микроконтроллеров, построенных на базе ядра PIC. Впервые устройства линейки PIC18 получили операционный усилитель в low–pin корпусах. PIC18F–Q41 – это новая серия контроллеров,... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.