VSC7552-V/5CC

SparX-5 Family of L2/L3 Enterprise 25G Ethernet Switches Introduction The SparX-5 Enterprise Ethernet switch family provides a rich set of Enterprise switching features such as advanced TCAM-based VLAN and QoS processing enabling delivery of differentiated services, and security through TCAMbased frame processing using versatile content aware processor (VCAP). IPv4/IPv6 Layer 3 (L3) unicast and...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Корпус FCBGA888
Рабочая температура
Примечания 25Gbit L2/L3 Enterprise Switch, x64 Ports, Total bandwidth 128Gbps
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
SparX-5 Family of L2/L3 Enterprise 25G Ethernet Switches Introduction The SparX-5 Enterprise Ethernet switch family provides a rich set of Enterprise switching features such as advanced TCAM-based VLAN and QoS processing enabling delivery of differentiated services, and security through TCAMbased frame processing using versatile content aware processor (VCAP). IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K IPv6 (S,G) multicast groups. L3 security features include source guard and reverse path forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and IP tunnels (IP over GRE/IP). The SparX-5 switch family features a highly flexible set of Ethernet ports with support for 25G aggregation links, QSGMII, USGMII, and USXGMII. ® ® The device integrates a powerful 1 GHz dual-core ARM Cortex -A53 CPU enabling full management of the switch and advanced Enterprise applications. The SparX-5 switch family targets managed Layer 2 and Layer 3 equipment in SMB, SME, and Enterprise where high port count 1G/2.5G/5G/10G switching with 25G aggregation links is required. The SparX-5 switch family consists of following SKUs. VSC7552 SparX-5-128 supports up to 128 Gbps of bandwidth with the following primary port configurations. • • • • 12 × 10G 6 x 10G + 2 x 25G 16 × 2.5G + 8 × 10G 48 × 1G + 8 × 10G VSC7556 SparX-5-160 supports up to 160 Gbps of bandwidth with the following primary port configurations. • • • • 16 × 10G 10 × 10G + 2 × 25G 16 × 2.5G + 10 × 10G 48 × 1G + 10 × 10G VSC7558 SparX-5-200 supports up to 200 Gbps of bandwidth with the following primary port configurations. • • 20 × 10G 8 × 25G In addition, the device supports one 10/100/1000/2500/5000 Mbps SGMII/SerDes node processor interface (NPI) Ethernet port. Features This section lists the key device features and benefits. • Layer 2 and Layer 3 Forwarding ® – IEEE 802.1Q switch with 4K VLANs and 32K MAC table entries – Push/pop/translate up to three VLAN tags on ingress and egress – RSTP and MSTP support © 2021 Microchip Technology Inc. and its subsidiaries Datasheet DS00003823D-page 1 PDF
Документация на VSC7552-V/5CC 

SparX-5 Family of L2/L3 Enterprise 25G Ethernet Switches

Дата модификации: 16.08.2021

Размер: 4.17 Мб

608 стр.

    Публикации 1

    показать свернуть
    10 января
    новость

    SparX-5 – новая линейка корпоративных и индустриальных 25G Ethernet-коммутаторов от Microchip

    Компания Microchip выпустила новую линейку промышленных и корпоративных Ethernet–коммутаторов SparX–5. SparX–5 − это полностью управляемые L2/L3 Ethernet–коммутаторы с общей пропускной способностью от 64 до 200 Gbps,... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.