LPC-60-700

 
  • Корпус:
  • Норма упаковки: 1  шт.

Файлы 1

показать свернуть
60W Single Output Switching Power Supply LPC-60 series Features : Constant current mode power supply Universal AC input / Full range Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Over current / Over voltage Fully isolated plastic case Cooling by free air convection 100% full load burn-in test Low cost, high reliability Suitable for LED lighting and moving sign applications 2 years warranty SPECIFICATION MODEL OUTPUT LPC-60-1050 LPC-60-1400 LPC-60-1750 DC VOLTAGE 48V 42V 34V DC VOLTAGE RANGE 3 ~ 48V 3 ~ 42V 3 ~ 34V CURRENT RANGE 1050mA 1400mA 1750mA RATED POWER 50.4W 58.8W 59.5W 200mVp-p 200mVp-p RIPPLE & NOISE (max.) Note.2 200mVp-p VOLTAGE TOLERANCE Note.3 5.0% LINE REGULATION 1.0% 2.0% LOAD REGULATION SETUP, RISE TIME INPUT Note.6 500ms, 120ms / 230VAC 500ms, 120ms / 115VAC at full load HOLD UP TIME (Typ.) 50ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 87% AC CURRENT INRUSH CURRENT(max.) 1.2A/115VAC 0.7A/230VAC COLD STAR 30A/115VAC 60A/230VAC LEAKAGE CURRENT 0.25mA / 240VAC CURRENT LIMIT Note.4 PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 16ms/115VAC at full load 85% 5% rated output current Protection type : Constant current limiting type 55.2 ~ 64.8V 48.3 ~ 56.7V 87% 39.1 ~ 45.9V Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +80 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS Design refer to UL1310 Class 2,TUV EN60950-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91, IP66 WITHSTAND VOLTAGE I/P-O/P:3KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:>100M Ohms/500VDC 25 70%RH EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B OTHERS HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A 732Khrs min. MIL-HDBK-217F (25 ) DIMENSION 162*42*30mm (L*W*H) 0.4Kg; 32pcs/13.8Kg/0.56CUFT PACKING NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the derating curve for more details. 5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. File Name:LPC-60-SPEC-2008-05-28 PDF
Документация на LPC-60-700 

LPC-60.cdr

Дата модификации: 05.06.2008

Размер: 74.9 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.