LPV-100-5RS

MEAN WELL
L P V- 1 0 0 100W Single Output Switching Power Supply series ■ Features : ‧Constant voltage design ‧Universal AC input / Full range ‧Fully encapsulated with IP67 level (Note.8) ‧Withstand 300VAC surge input for 5 seconds ‧Protections: Short circuit / Over current / Over voltage ‧Fully isolated plastic case ‧Cooling by free air convection ‧100% full load burn-in test ‧Low cost, high reliabi...
развернуть ▼ свернуть ▲
Фотография серии LPV-100
Чертёж серии LPV-100
 
 

Технические характеристики

показать свернуть
Тип преобразователя
Мощность выходная
Диапазон выходных напряжений
Диапазон выходных токов
Напряжение сети/входное номинальное
Режим стабилизации
Тип диммирования
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Диапазон входных напряжений (DC)
Напряжение изоляции вход-выход
Количество выходов
Функция защиты КЗ, перегрузка, перенапряжение
Температура рабочая
Размер 190×52×37 мм
Применение
Особенности
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
L P V- 1 0 0 100W Single Output Switching Power Supply series ■ Features : ‧Constant voltage design ‧Universal AC input / Full range ‧Fully encapsulated with IP67 level (Note.8) ‧Withstand 300VAC surge input for 5 seconds ‧Protections: Short circuit / Over current / Over voltage ‧Fully isolated plastic case ‧Cooling by free air convection ‧100% full load burn-in test ‧Low cost, high reliability ‧Suitable for LED lighting and moving sign applications(Note 7.) ‧2 years warranty IP67 SPECIFICATION MODEL LPV-100-12 LPV-100-15 LPV-100-24 LPV-100-36 LPV-100-48 5V 12V 15V 24V 36V 48V RATED CURRENT 12A 8.5A 6.7A 4.2A 2.8A 2.1A CURRENT RANGE 0 ~ 12A 0 ~ 8.5A 0 ~ 6.7A 0 ~ 4.2A 0 ~ 2.8A 0 ~ 2.1A RATED POWER 60W 102W 100.5W 100.8W 100.8W 100.8W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p VOLTAGE TOLERANCE Note.3 ±8.0% ±5.0% 88% 88% 89% 41.4 ~ 48.6V 55.2 ~ 64.8V ±1.0% LINE REGULATION ±6.0% LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT 50ms/230VAC Note.4 90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz EFFICIENCY (Typ.) 80% AC CURRENT INRUSH CURRENT(Typ.) 2.2A/115VAC 1.2A/230VAC COLD START 75A(twidth=700μs measured at 50% Ipeak) at 230VAC OVER CURRENT PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE 2000ms, 25ms / 115VAC 14ms/115VAC at full load FREQUENCY RANGE LEAKAGE CURRENT OTHERS ±2.0% Note.6 2000ms, 25ms / 230VAC 85% 87% 0.25mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover -25 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes IP67 approved; Design refer to TUV EN60950-1 I/P-O/P:3KVAC I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A(≤80% load), EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteria A 703Khrs min. MIL-HDBK-217F (25℃) 190*52*37mm (L*W*H) 0.63Kg;20pcs/13.6Kg/0.55CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit. 8. Suitable for indoor use or outdoor use without direct sunlight exposure. ‘ OUTPUT LPV-100-5 DC VOLTAGE File Name:LPV-100-SPEC 2014-03-27 PDF
Документация на серию LPV-100 

LPV-100

Дата модификации: 02.04.2014

Размер: 461.8 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    APC-12-350 (MW)