TS-1500-224B

MEAN WELL
DC/AC преобразователи
развернуть ▼ свернуть ▲
Фотография серии TS-1500
Чертеж серии TS-1500
 
 

Технические характеристики

показать свернуть
Выходная мощность
Входное напряжение DC
Выходное напряжение AC
Форма выходного напряжения
Размер 420×220×88 мм
Рабочая температура
  Примечания: Сигнализация о снижении напряжения аккумуляторной батареи, Автоотключение при снижении Uвх, защита от переполюсовки, Защита от короткого замыкания, перегрузки, перенапряжения, перегрева
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 3

показать свернуть
TS-1500 1500W True Sine Wave DC-AC Power Inverter ■ Features : series User’s Manual True sine wave output (THD<3%) High surge power up to 3000W High efficiency up to 91% Power ON-OFF switch Standby saving mode can be selectable Front panel indicator for operation status Thermostatically controlled cooling fan Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Input polarity reverse / Overload Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. Support RS-232 communication (communication cable order No.: RJ11-RS232, sold sperately) Note.10 3 years warranty E13 UL458 (for 112/124 type F only) SPECIFICATION TS-1500-112 MODEL NO. TS-1500-124 TS-1500-148 = A, F RATED POWER (Typ.) TS-1500-212 TPTC004 IEC62368-1 (for 212/224/248 only) TS-1500-224 TS-1500-248 = B, C, D 1500W MAXIMUM OUTPUT POWER (Typ.) 1725W for 180 sec. / 1875W for 10 sec. / surge power 3000W for 30 cycles AC VOLTAGE OUTPUT 100 / 110 / 115 / 120VAC selectable by setting button FREQUENCY Note.9 60±0.1Hz WAVEFORM Note.2 True sine wave (THD<3%) 50/60Hz selectable by setting button S.W AC REGULATION (Typ.) ±3.0% SAVING MODE (Typ.) Default disabled. Load≦5W will be changed to standby mode 50±0.1Hz FRONT PANEL INDICATOR Battery voltage level, output load level, saving mode, fault and operation status BAT. VOLTAGE 12V 24V 50/60Hz selectable by setting button S.W 48V 12V 24V 48V 42 ~ 60VDC 37.5A 10.5 ~ 15VDC 150A 21 ~ 30VDC 42 ~ 60VDC 75A 37.5A 89% Open & sealed Lead Acid 89% 88% 90% 91% 40A*5 11.3±4% 30A*3 22.5±4% 30A*2 45±4% 40A*5 11.3±4% 30A*3 22.5±4% 30A*2 45±4% 10.5±4% 21±4% 42±4% 10.5±4% 21±4% 42±4% 82℃± 5℃ 96℃± 5℃ 68℃± 5℃ 68℃± 5℃ 68℃± 5℃ VOLTAGE RANGE (Typ.)Note.3,6 10.5 ~ 15VDC DC CURRENT (Typ.) Note.5 150A INPUT 200 / 220 / 230 / 240VAC selectable by setting button 21 ~ 30VDC 75A NO LOAD DISSIPATION (Typ.) ≦18W @ standby saving mode OFF MODE CURRENT DRAW ≦1mA EFFICIENCY (Typ.) Note.2 87% BATTERY TYPES FUSE BATTERY BAT. LOW ALARM INPUT PROTECTION BAT. LOW SHUTDOWN REVERSE POLARITY By internal fuse open 82℃± 5℃ OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH3 detect on heatsink of power transistor OUTPUT SHORT OUTPUT PROTECTION OVER LOAD (Typ.) Protection type : Shut down o/p voltage, re-power on to recover 105 ~ 115% load for 180 sec., 115% ~ 125% load for 10 sec. Protection type : Shut down o/p voltage, re-power on to recover GFCI PROCTECTION ENVIRONMENT WORKING TEMP. WORKING HUMIDITY UL458 (only for "GFCI" receptacle-Type F ) 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY CONTROL WIRING OTHERS NOTE DIMENSION PACKING None Note.1 0 ~ +40℃ @ 100% load ; 60℃ @ 50% load -30 ~ +70℃ / -22 ~ +158oF, 10 ~ 95% RH non-condensing 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes IEC62368-1 CB, EAC TP TC 004 approved; Design refer to BS EN/EN62368-1 UL458 (only for "GFCI" receptacle-Type F ), EAC TP TC 004 EAC TP TC 004 Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC Bat I/P - AC O/P, Bat I/P - FG, AC O/P - FG: 100M ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 class B, 72/ 245/ CEE, 95/ 54/ CE, E-Mark, EAC TP TC 020 Compliance to FCC class A, EAC TP TC 020 Compliance to EAC TP TC 020 Note.10 RJ11 -RS232 (Option) Compliance to BS EN/EN61000-4-2,3,8, EAC TP TC 020 420*220*88mm (L*W*H) 6.81Kg; 2pcs/14.6Kg/1.61CUFT 1.Output derating capacity referenced by curve 1. 2.THD and Efficiency is tested by 1000W, linear load at 13V, 26V, 52V input voltage. 3.Input derating capacity referenced by curve 2. 4.All parameters not specified above are measured at rated load, 25℃ of ambient temperature and set to factory setting. 5.DC current is tested by 1500W, linear load at 13V, 26V, 52V input voltage. 6.The tolerance of each voltage value by models is:112/212→±0.5V;124/224→±1V;148/248→±2V. 7.Please do not turn on the inverter before start the engine if inverter connect to vehicle’s battery directly. 8.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). 9.Type F for 60Hz only. 10.The cable is enclosed for the connection between TS-1500 and computer for software monitoring. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:TS-1500-SPEC 2021-09-07 PDF
Документация на TS-1500-248B 

TS-1500.cdr

Дата модификации: 07.09.2021

Размер: 111 Кб

2 стр.

Инверторы TN/TS-1500 Преобразователи постоянного напряжения аккумуляторной батареи в переменное напряжение 230 В/50Гц Руководство по эксплуатации инверторов TN-1500, TS-1500 Инструкция по использованию программного обеспечения инверторов TN-1500, TS-1500 Установка и настройка – только квалифицированным персоналом! Изучите инструкцию перед включением! © Авторы перевода приложили все возможные усилия для того, чтобы сделать его качественным и достоверным. Все технические данные и параметры сверены с фирменным описанием изделий с сайта www.meanwell.com. Однако при возникновении разночтений между переводом и оригиналом на английском языке, а также во всех затруднительных случаях следует полагаться на информацию, изложенную в оригинале. PDF
Инструкция на серию TS-1500 

Дата модификации: 17.07.2009

Размер: 7.24 Мб

46 стр.

TS-1500 1500W True Sine Wave DC-AC Power Inverter series Features : True sine wave output (THD<3%) High surge power up to 3000W High efficiency up to 91% Power ON-OFF switch Standby saving mode can be selectable Front panel indicator for operation status Thermostatically controlled cooling fan Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Input polarity reverse / Overload Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. Optional monitoring software E13 2 years warranty SPECIFICATION MODEL TS-1500-112 TS-1500-124 TS-1500-148 TS-1500-212 TS-1500-224 TS-1500-248 1500W RATED POWER (Typ.) MAXIMUM OUTPUT POWER (Typ.) 1725W for 180 sec. / 2250W for 10 sec. / surge power 3000W for 30 cycles OUTPUT AC VOLTAGE 100 / 110 / 115 / 120VAC selectable by setting button 200 / 220 / 230 / 240VAC selectable by setting button FREQUENCY 60 0.1Hz 50 0.1%Hz WAVEFORM True sine wave (THD<3%) at rated input voltage 50/60Hz selectable by setting button S.W 3.0% AC REGULATION (Typ.) SAVING MODE (Typ.) Load FRONT PANEL INDICATOR Battery voltage level, output load level, saving mode, fault and operation status 5W will be changed to standby mode BAT. VOLTAGE 12V 24V 48V 12V 24V 48V 42 ~ 60VDC 37.5A 10.5 ~ 15VDC 150A 21 ~ 30VDC 42 ~ 60VDC 75A 37.5A 89% Open & sealed Lead Acid 90% 88% 90% 91% 40A*5 11.3 4% 30A*3 22.5 4% 30A*2 45 4% 40A*5 11.3 4% 30A*3 22.5 4% 30A*2 45 4% 10.5 4% 21 4% 42 4% 10.5 4% 21 4% 42 4% 68 68 21 ~ 30VDC 75A 18W @ standby saving mode VOLTAGE RANGE (Typ.)Note.1 10.5 ~ 15VDC DC CURRENT (Typ.) Note.5 150A INPUT NO LOAD DISSIPATION 1mA OFF MODE CURRENT DRAW EFFICIENCY (Typ.) Note.2 87% BATTERY TYPES FUSE BATTERY BAT. LOW ALARM INPUT PROTECTION BAT. LOW SHUTDOWN REVERSE POLARITY By internal fuse open 82 OVER TEMPERATURE 96 5 5 5 68 5 Protection type : Shut down o/p voltage, re-power on to recover UL458 (only for "GFCI" receptacle-Type F ) @ 100% load ; 60 @ 50% load 20% ~ 90% RH non-condensing None Note.3 0 ~ +40 STORAGE TEMP., HUMIDITY VIBRATION LVD SAFETY & WITHSTAND VOLTAGE EMC EMI CONDUCTION&RADIATION EMS IMMUNITY NOTE 5 Protection type : Shut down o/p voltage, re-power on to recover SAFETY STANDARDS OTHERS 82 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. GFCI PROCTECTION ENVIRONMENT 5 Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH3 detect on heatsink of power transistor OUTPUT SHORT OUTPUT PROTECTION OVER LOAD (Typ.) WORKING TEMP. WORKING HUMIDITY 50/60Hz selectable by setting button S.W -30 ~ +70 / -22 ~ +158oF, 10 ~ 95% RH 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes UL458 (only for "GFCI" receptacle-Type F ) None None Bat I/P - AC O/P:3.0KVAC EN60950-1 AC O/P - FG:1.5KVAC Compliance to FCC class A None CONTROL WIRING RJ11 -RS232 (Option) DIMENSION PACKING 420*220*88mm (L*W*H) 6.81Kg; 2pcs/14.6Kg/1.61CUFT Compliance to EN55022 class B, 72/ 245/ CEE, 95/ 54/ CE, E-Mark Compliance to EN61000-4-2,3,8 ENV50204 1.Output derating capacity referenced by curve 1. 2.Efficiency is tested by 1000W, linear load at 13V, 26V, 52V input voltage. 3.Output derating capacity referenced by curve 2. 4.All parameters not specified above are measured at rated load, 25 of ambient temperature. 5.DC current is tested by 1500W, linear load at 13V, 26V, 52V input voltage. File Name:TS-1500-SPEC 2009-02-07 PDF
Документация на серию TS-1500 

TS-1500.cdr

Дата модификации: 07.05.2009

Размер: 308 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    A301-100-F3 (MW)