TS-3000-224B

MEAN WELL
DC/AC преобразователи
развернуть ▼ свернуть ▲
Внешний вид TS-3000-224B

Технические характеристики

показать свернуть
Выходная мощность
Входное напряжение DC
Выходное напряжение AC
Форма выходного напряжения
Размер 467×283×100 мм
Рабочая температура
Примечания DC-AC Inverter Power Supply Module
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 1

показать свернуть
Тип Наименование Корпус Упаковка i P вых U вх U вых Форма T раб Примечания Карточка
товара
P+ NTS-3200-224EU (MW)
 
—

Файлы 2

показать свернуть
TS-3000 3000W True Sine Wave DC-AC Inverter ■ Features : series User’s Manual True sine wave output (THD<3%) High surge power up to 6000W High efficiency up to 92% Power ON-OFF switch Standby saving mode can be selectable Front panel indicator for operation status Thermostatically controlled cooling fan Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Input polarity reverse / Overload / AC circuit breaker Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. Support RS-232 communication (communication cable order No.: RJ11-RS232, sold sperately) Note.11 3 years warranty E13 UL458 (for 112/124 type G only) SPECIFICATION TS-3000-112 MODEL NO. TS-3000-124 TS-3000-148 = A, F, G RATED POWER (Typ.) TS-3000-212 TPTC004 IEC62368-1 (for 212/224/248 only) TS-3000-224 TS-3000-248 = B, C, D, G 3000W MAXIMUM OUTPUT POWER (Typ.) 3450W for 180 sec. / 4500W for 10 sec. / surge power 6000W for 30 cycles Factory setting set at 110VAC AC VOLTAGE OUTPUT FREQUENCY Note.10 60±0.1Hz WAVEFORM 50/60Hz selectable by setting button S.W 200 / 220 / 230 / 240VAC selectable by setting button S.W 50±0.1Hz AC REGULATION (Typ.) ±3% SAVING MODE (Typ.) Default disabled. Load≦5W will be changed to standby mode FRONT PANEL INDICATOR Battery voltage level, output load level, saving mode, fault and operation status BAT. VOLTAGE 12V DC CURRENT (Typ.) 50/60Hz selectable by setting button S.W Note.7 True sine wave (THD<3%) VOLTAGE RANGE (Typ.) Note.3,6 10.5 ~ 15VDC INPUT Factory setting set at 230VAC 100 / 110 / 115 / 120VAC selectable by setting button S.W Note.4 300A 24V 48V 12V 24V 48V 21 ~ 30VDC 150A 42 ~ 60VDC 75A 10.5 ~ 15VDC 21 ~ 30VDC 42 ~ 60VDC 300A 150A 75A 91% 89% 91% 92% 20A*6 45V 40A*12 11.3V 40A*6 22.5V 20A*6 45V 42V 10.5V 21V 42V 85℃± 5℃ 80℃± 5℃ 75℃± 5℃ 75℃± 5℃ NO LOAD DISSIPATION (Typ.) ≦10W @ standby saving mode OFF MODE CURRENT DRAW (Typ.) ≦1mA EFFICIENCY (Typ.) Note.1 88% 90% Open & sealed lead acid battery BATTERY TYPES FUSE 40A*12 40A*6 BATTERY BAT. LOW ALARM 22.5V Note.6 11.3V INPUT 21V PROTECTION BAT. LOW SHUTDOWN Note.6 10.5V By internal fuse open REVERSE POLARITY 90℃± 5℃ OVER TEMPERATURE OUTPUT SHORT OUTPUT PROTECTION OVER LOAD (Typ.) Protection type : Shut down o/p voltage, re-power on to recover 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. Protection type : Shut down o/p voltage, re-power on to recover CIRCUIT BREAKER GFCI PROCTECTION WORKING TEMP. ENVIRONMENT SAFETY & EMC NOTE AC output receptacle:15A Optional (Only type F) None Note.2 0 ~ +40℃ @ 100% load ; 60℃ @ 50% load WORKING HUMIDITY 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY VIBRATION -30 ~ +70℃ / -22 ~ +158 F, 10 ~ 95% RH non-condensing SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY CONTROL WIRING OTHERS 85℃± 5℃ Protection type : Shut down o/p voltage, re-power on to recover DIMENSION PACKING o 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes IEC62368-1 CB, EAC TP TC 004 approved; Design refer to BS EN/EN62368-1 UL458 (only for Type G ), EAC TP TC 004 EAC TP TC 004 Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC Bat I/P - AC O/P, Bat I/P - FG, AC O/P - FG: 100M ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark, EAC TP TC 020 Compliance to FCC class A, EAC TP TC 020 Compliance to EAC TP TC 020 Note.11 RJ11 -RS232 (Option) Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, EAC TP TC 020 466.8*283.5*100mm (L*W*H) 12.9Kg; 1pcs/14Kg/1.49CUFT 1.Efficiency is tested by 2100W, linear load at 13V, 26V, 52V input voltage. 2.Output derating capacity referenced by curve 1. 3.Input derating capacity referenced by curve 2. 4.DC current is tested by 3000W, linear load at 12V, 24V, 48V input voltage. 5.All parameters not specified above are measured at rated load, 25℃ of ambient temperature and set to factory setting. 6.The tolerance of each voltage value by models is:112/212→±0.5V;124/224→±1V;148/248→±2V. 7.THD is tested by 3000W, linear load at 13,26,52V input voltage. 8.Please do not turn on the inverter before start the engine if inverter connect to vehicle’s battery directly. 9.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). 10.Type F for 60Hz only. 11.The cable is enclosed for the connection between TS-3000 and computer for software monitoring. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:TS-3000-SPEC 2021-09-07 PDF
Документация на TS-3000-248G 

TS-3000.cdr

Дата модификации: 07.09.2021

Размер: 134.8 Кб

2 стр.

TS-3000 3000W True Sine Wave DC-AC Inverter series Features : True sine wave output (THD<3%) High surge power up to 6000W High efficiency up to 92% Power ON-OFF switch Standby saving mode can be selectable Front panel indicator for operation status Thermostatically controlled cooling fan Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Input polarity reverse / Overload / AC circuit breaker Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. Optional monitoring software and connection cable (MW order No.: DS-TN-1500) 3 years warranty E13 SPECIFICATION MODEL TS-3000-124 TS-3000-112 TS-3000-148 TS-3000-212 TS-3000-224 TS-3000-248 3000W RATED POWER (Typ.) MAXIMUM OUTPUT POWER (Typ.) 3450W for 180 sec. / 4500W for 10 sec. / surge power 6000W for 30 cycles Factory setting set at 110VAC Factory setting set at 230VAC 100 / 110 / 115 / 120VAC selectable by setting button S.W 200 / 220 / 230 / 240VAC selectable by setting button S.W FREQUENCY 60 0.1Hz 50 0.1Hz WAVEFORM True sine wave (THD<3%) at rated input voltage AC VOLTAGE OUTPUT 50/60Hz selectable by setting button S.W 3% AC REGULATION (Typ.) SAVING MODE (Typ.) Default disabled. Load FRONT PANEL INDICATOR Battery voltage level, output load level, saving mode, fault and operation status BAT. VOLTAGE 12V VOLTAGE RANGE (Typ.) Note.3,6 10.5 ~ 15VDC DC CURRENT (Typ.) INPUT Note.4 300A 5W will be changed to standby mode 24V 48V 12V 24V 48V 21 ~ 30VDC 150A 42 ~ 60VDC 75A 10.5 ~ 15VDC 21 ~ 30VDC 42 ~ 60VDC 300A 150A 75A 91% 89% 91% 92% 20A*6 45V 40A*12 11.3V 40A*6 22.5V 20A*6 45V 42V 10.5V 21V 42V NO LOAD DISSIPATION (Typ.) 10W @ standby saving mode OFF MODE CURRENT DRAW (Typ.) 1mA EFFICIENCY (Typ.) 90% Open & sealed lead acid battery Note.1 88% BATTERY TYPES FUSE 40A*6 40A*12 BATTERY BAT. LOW ALARM 22.5V Note.6 11.3V INPUT 21V PROTECTION BAT. LOW SHUTDOWN Note.6 10.5V By internal fuse open REVERSE POLARITY 90 OVER TEMPERATURE SAFETY & EMC NOTE 5 85 5 5 75 5 75 5 Protection type : Shut down o/p voltage, re-power on to recover AC output receptacle:15A Optional (Only type F) @ 100% load ; 60 @ 50% load 20% ~ 90% RH non-condensing None Note.2 0 ~ +40 STORAGE TEMP., HUMIDITY VIBRATION -30 ~ +70 / -22 ~ +158oF, 10 ~ 95% RH SAFETY STANDARDS 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes UL458 (only for "GFCI" receptacle-Type F ) None LVD WITHSTAND VOLTAGE None Bat I/P - AC O/P:3.0KVAC ISOLATION RESISTANCE EMC EMISSION DIMENSION PACKING 80 Protection type : Shut down o/p voltage, re-power on to recover WORKING HUMIDITY EMC IMMUNITY CONTROL WIRING OTHERS 85 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. CIRCUIT BREAKER GFCI PROCTECTION WORKING TEMP. 5 Protection type : Shut down o/p voltage, re-power on to recover OUTPUT SHORT OUTPUT PROTECTION OVER LOAD (Typ.) ENVIRONMENT 50/60Hz selectable by setting button S.W EN60950-1 AC O/P - FG:1.5KVAC Bat I/P - AC O/P, Bat I/P - FG, AC O/P - FG: 100M ohms / 500VDC / 25 / 70% RH Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark Compliance to FCC class A None Compliance to EN61000-4-2,3,4,5,6,8,11 RJ11 -RS232 (Option) 466.8*283.5*100mm (L*W*H) 12.9Kg; 1pcs/14Kg/1.98CUFT 1.Efficiency is tested by 2100W, linear load at 13V, 26V, 52V input voltage. 2.Output derating capacity referenced by curve 1. 3.Output derating capacity referenced by curve 2. 4.DC current is tested by 3000W, linear load at 12V, 24V, 48V input voltage. 5.All parameters not specified above are measured at rated load, 25 of ambient temperature. 6.The tolerance of each voltage value by models is:112/212 0.5V;124/224 1V;148/248 2V File Name:TS-3000-SPEC 2011-05-24 PDF
Документация на TS-3000-224B 

TS-3000.cdr

Дата модификации: 25.05.2011

Размер: 824.1 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    A301-100-F3 (MW)