PCR1V331MCL1GS

Nichicon
Конденсатор алюминиевый 35 В x 330 мкФ ±20%, SMD, -55...125 °C, 4000 ч
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Номинальная ёмкость
Допуск ёмкости
Номинальное напряжение
Диаметр корпуса
Высота корпуса
Рабочая температура
Срок службы
Способ монтажа
  Примечания: Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
Диаметр x Высота 10×10×10.3 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 24

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Диаметр Высота Траб Наработка Монтаж Примечания Выводы Карточка
товара
P- 35SVPK330M (PAN)
 
— в ленте 400 шт
 
 Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141 —
A+ EEHZK1V331P (PAN)
 
— в ленте 500 шт —
A+ EEEFK1V331AP (PAN)
 
— в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141 —
A+ EEEFK1V331P (PAN)
 
— в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141 —
A+ EEEFN1V331UP (PAN)
 
— в ленте 500 шт V-FN, 35V, 330uF, 105°C, 2000h, 8x10.2mm, ripple 600mArms, 0.16Ohm —
A+ EEEFT1V331AP (PAN)
 
— в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333 —
A+ JCK1V331M100105 (JB)
 
— в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141 —
A+ JCS1H331M125135 (JB)
 
— 200 шт — —
A+ JCS1V331M100105 (JB)
 
— 500 шт — —
A+ JCK1H331M125135 (JB)
 
— 200 шт — —
A+ EEETK1H331AQ (PAN)
 
— 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353 —
A+ EEEFK1H331AQ (PAN)
 
— 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353 —
A+ EEEFH1V331L (PAN)
 
— 500 шт
 
 V-FH / 35V / 330uF / 105°C / 10000h / 10x10.2mm / ripple 850mArms / ESR 0.15Ohm
A+ EEEFK1H331AV (PAN)
 
— 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353 —
A+ EEEFT1H331AL (PAN)
 
—
 
 — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141 —
A+ EEEFT1H331AP (PAN)
 
— в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141 —
A+ EEEFT1H331AV (PAN)
 
— 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141 —
A+ EEEFT1H331GP (PAN)
 
— 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141 —
A+ EEEFT1H331GV (PAN)
 
—
 
 — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141 —
A+ EEETK1V331AQ (PAN)
 
— 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353 —
A+ EEEFT1V331AL (PAN)
 
—
 
 — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333 —
A+ EEEFT1V331AV (PAN)
 
— 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333 —
A+ EEEFT1V331GP (PAN)
 
— 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333 —
A+ EEEFT1V331GV (PAN)
 
—
 
 — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333 —

Файлы 1

показать свернуть
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCR Chip Type, High Reliability High reliability, High voltage (to 80V). Low ESR, High ripple current. Long life of 4000 hours at 125°C. SMD type : Lead free reflow soldering condition at 260°C peak complete correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). ESR after Endurance at -40°C. PCM AEC-Q200 compliant. Please contact us for details. PCH PCZ High Temperature Long Life High Capacitance Long Life Assurance PCR PCX Specifications Item Performance Characteristics Category Temperature Range – 55 to +125°C Rated Voltage Range 16 to 80V Rated Capacitance Range 22 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) After 2 minutes' application of rated voltage, leakage current is not more than 0.03CV or 3(µA), whichever is greater. 1.25 1.25 (100kHz) Temperature Characteristics (Max.Impedance Ratio) Z+125°C / Z+20°C Z– 55°C / Z+20°C Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 4000 hours at 125°C. Within ± 20% of initial capacitance value ( 3) 150% or less of the initial specified value 200% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ ESR ( 1) Leakage current ( 2) After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life ESR after Endurance ( 1) Less than or equal to the specified value at 100kHz, -40°C Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C, 85% RH. Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of initial capacitance value ( 3) 150% or less of the initial specified value 200% or less of the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. The duration for over +230°C temperature at capacitor surface shall not exceed 60 seconds. In case peak temperature is 260°C or less, reflow soldering shall be two times maximum. Measurement for solder temperature profile shall be made at the capacitor top. Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Type numbering system (Example : 35V 150µF) 3 Initial value : The value before test of examination of resistance to soldering. 1 Dimensions Positive Standard Lot No. 0.3 MAX. 3 4 5 6 7 8 9 10 11 12 13 14 Taping code 0.5 MAX. Capacitance Plastic platform 2 PCR 1 V 1 5 1 MC L 1 GS C±0.2 Size code Configuration Capacitance tolerance (±20%) A±0.2 E Negative H Positive Plastic platform B±0.2 C±0.2 A±0.2 0.3 MAX. φD±0.5 CR 150 V 331 Lot No. Rated voltage (35V) Series name Standard (mm) Size φ8 × 7L φ8 × 10L φ8 × 12L φ10 × 8L φ10 ×10L φ10×12.7L φD 8.0 8.0 8.0 10.0 10.0 10.0 Voltage (V:35V) L±0.5 H Negative Dimension table in next page. Size φ8 ×10.5L φ10×10.5L φ10 ×13.2L φD 8.0 10.0 10.0 L 6.9 9.9 11.9 7.9 9.9 12.6 L 10.0 10.0 9.0 9.0 9.0 11.0 11.0 11.0 A 9.0 11.0 11.0 B 8.3 8.3 8.3 10.3 10.3 10.3 B 8.3 10.3 10.3 C 8.3 8.3 8.3 10.3 10.3 10.3 C 8.3 10.3 10.3 E 3.2 3.2 3.2 4.6 4.6 4.6 E 3.1 4.6 4.6 H 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 V H 12.7 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 Frequency coefficient of rated ripple current 16 20 25 35 50 63 80 Code C Aid electrode Vibration Resistance (mm) A Voltage Series Configuration Code Standard L Vibration Resistance S Type 0.5 MAX. Vibration Resistance Capacitance L +0.1 -0.4 E Voltage (V:35V) Series B±0.2 φD±0.5 CR 150 V 331 Rated capacitance (150µF) D E V H J K Frequency 120Hz 1kHz­ 10kHz 100kHz or more Coefficient 0.05 0.30 0.70 1.00 φ8×10L(φ8×10.5L), φ10×10L(φ10×10.5L), φ10×12.7L(φ10×13.2L) : The vibration structure-resistant product is also available upon request, please ask for details. ( ) : Size of the vibration structure-resistant product. CAT.8100K PDF
Документация на серию PCR 

2022CAT8100K_p038_075.indd

Дата модификации: 01.09.2021

Размер: 1.01 Мб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)