MinIMU-9 v5 Gyro. Accelerometer. and Compass [LSM6DS33 and LIS3MDL Carrier]

The Pololu MinIMU-9 v5 is a compact (0.8 × 0.5) board that combines ST's LSM6DS33 3-axis gyroscope and 3-axis accelerometer and LIS3MDL 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore recommend careful reading of the LSM6DS33 datasheet (1MB pdf) and LIS3MDL datasheet (2MB pdf) before using this product. These sensors are great ICs, but their small packages make them difficult for the typical student or hobbyist to use. They also operate at voltages below 3.6 V, which can make interfacing difficult for microcontrollers operating at 5 V. The MinIMU-9 v5 addresses these issues by incorporating additional electronics, including a voltage regulator and a level-shifting circuit, while keeping the overall size as compact as possible. The board ships fully populated with its SMD components, including the LSM6DS33 and LIS3MDL, as shown in the product picture. Specifications Dimensions: 0.8 × 0.5 × 0.1 (20 mm × 13 mm × 3 mm) Weight without header pins: 0.7 g (0.02 oz) Operating voltage: 2.5 V to 5.5 V Supply current: 5 mA Output format (I²C): Gyro: one 16-bit reading per axis Accelerometer: one 16-bit reading per axis Magnetometer: one 16-bit reading per axis Sensitivity range: Gyro: ±125, ±245, ±500, ±1000, or ±2000°/s Accelerometer: ±2, ±4, ±8, or ±16 g Magnetometer: ±4, ±8, ±12, or ±16 gauss
развернуть ▼ свернуть ▲

Файлы 1

показать свернуть
Документация на LIS3MDL 

Digital output magnetic sensor: ultra-low-power, high-performance 3-axis magnetometer

Дата модификации: 15.05.2015

Размер: 1.62 Мб

33 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.