PA5003.821NLT

PULSE Electronics Co.
Дроссель 820 нГн ±20%, 12.9 А
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Номинальная индуктивность
Допуск индуктивности
Номинальный ток
Магнитное экранирование
Корпус
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 4

показать свернуть
Тип Наименование Корпус Упаковка i Индуктивность Допуск Ток Насыщение Перегрев Экран Корпус Траб Примечания Карточка
товара
A+ XAL5020-801MEC (COIL)
 
A+ XAL5030-801MEC (COIL)
 
A+ PM2203.801NLT (PULSE)
 
A+ NPIM52ZR80MTRF (NC)
 

Файлы 1

показать свернуть
SMT Power Inductors High Current Composite Inductor - PA5003.XXXNLT and PM2203.XXXNLT IA Height: 3.1mm Max Footprint: 5.7mm x 5.5mm Max Current Rating: up to 36Apk Inductance Range: 0.15uH to 4.7uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise Available in Commercial (PA5003) and Automotive (PM2203) grades T F 169 4 9 Part Number Electrical Specifications @ 25°C, Operating Temperature Range -55°C to 155°C DC Resistance Inductance Rated3 Current 100KHz, 0.1V TYP. MAX. Saturation2 Current uH±20% A mΩ mΩ A K Factor for Core Loss PM2203.151NLT 0.15 22.2 2.10 2.31 32.5 458.5 PA5003.161NLT PM2203.161NLT 0.16 22.2 2.12 2.33 32.0 458.5 PA5003.331NLT PM2203.331NLT 0.33 19.2 3.20 3.52 26.0 291.7 PA5003.471NLT PA5003.561NLT PA5003.601NLT PA5003.801NLT PA5003.821NLT PA5003.102NLT PA5003.122NLT PA5003.152NLT PA5003.182NLT PA5003.222NLT PA5003.332NLT PA5003.472NLT PM2203.471NLT PM2203.561NLT PM2203.601NLT PM2203.801NLT PM2203.821NLT PM2203.102NLT PM2203.122NLT PM2203.152NLT PM2203.182NLT PM2203.222NLT PM2203.332NLT PM2203.472NLT 0.47 0.56 0.6 0.8 0.82 1.0 1.2 1.5 1.8 2.2 3.3 4.7 18.4 17.7 17.7 13.1 12.9 12.2 11 10.5 10.1 9.7 8.1 5.9 3.75 4.05 4.11 5.14 5.25 6.90 8.80 10.10 11.50 13.20 21.00 33.00 4.13 4.52 4.52 5.65 5.78 7.60 9.70 11.20 12.70 14.50 23.10 36.30 24.0 20.2 20.0 18.0 17.6 14.3 13.5 12.5 11.3 9.0 8.7 7.0 213.9 213.9 213.9 168.9 168.9 139.5 118.9 103.5 103.5 91.7 74.6 58.3 Commerical Automotive6 PA5003.151NLT Notes: 1. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the standard operating range. 2. The saturation current is the current at which the initial inductance is guaranteed to drop by no more than 40%. The typical inductance at a specified current can be found on the typical performance curves. 3. The rated current is the DC current required to raise the component temperature by approximately 40�C. Take note that the components’ performanc varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. 4. The part temperature (ambient+temp rise) should not exceed 155�C under worst case operating conditions. Circuit design, PCB trace size and thickness, airflow and 1 Power.PulseElectronics.com 5. 6. 7. other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. Parts shown in bold are standard catalog parts and are available through sample stock and distribution. Parts in lighter font are available but are not necessarily held in sample stock or distribution and lead times may be longer. Please contact Pulse for availablity. The PM2203.XXXNLT part numbers are AEC-Q200 and IATF16949 certified. The Inductance and mechanical dimensions are 100% tested in production but do not necessarily meet a product capability index (Cpk) >1.33 and therefore may not strictly conform to PPAP. Special Characteristics P808.D (01/21) PDF
Документация на PA5003.102NLT 

Дата модификации: 07.01.2021

Размер: 1.12 Мб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.