RACT12-350

RECOM Electronic
• Triac –dimmable with leading or trailing edge dimmers • Class II with SELV output (no earth required) • Extra-large screw terminals and integrated cable clamps for easy installation • Power factor corrected >0.95 • Dimming range 1..100% • Compatible with a wide range of dimmers Features TRIAC Dimmable LED Driver Description AC/DC Converter RACT12 12 Watt 3 TRIAC Dimmable Single Outp...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Тип преобразователя
Мощность выходная
Диапазон выходных напряжений
Диапазон выходных токов
Напряжение сети/входное номинальное
Режим стабилизации
Тип диммирования
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Напряжение изоляции вход-выход
Количество выходов
Коэффициент мощности
Эффективность
Функция защиты
Температура рабочая
Размер 109×40×22 мм
Применение
Особенности
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
• Triac –dimmable with leading or trailing edge dimmers • Class II with SELV output (no earth required) • Extra-large screw terminals and integrated cable clamps for easy installation • Power factor corrected >0.95 • Dimming range 1..100% • Compatible with a wide range of dimmers Features TRIAC Dimmable LED Driver Description AC/DC Converter RACT12 12 Watt 3 TRIAC Dimmable Single Output YEA R y arrant w The RACT12-xxx series are low cost, triac-dimmable, constant current 12W LED drivers available with either 300mA, 350mA, 500mA or 700mA full-range outputs. The drivers are Class II (double insulated) meaning no earth connection is required. The phase angle dimming works with leading or trailing edge dimmers. The RACT12 is suitable for indoor locations up to 50°C ambient temperature and is certified for building into furniture for applications such as dimmable shelf lighting, cove lighting or accent lighting. It is CE marked (LVD + EMC + RoHS), EAC and has IEC61347-1/IEC61347-2-13 CB report certification. Selection Guide Efficiency Output min. @rated load Power [%] [W] 12-24 500 81 12 RACT12-700 198-264 9-18 700 81 12 O M CONVER T RoHS 2 + 10 from 10 O M CONVER T compliant PL U D IA N T PRO CO M C REACH compliant CO All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. C M TS 198-264 C RACT12-500 S 12 12 R 82 81 E 300 350 S 20-40 18-35 R 198-264 198-264 E RACT12-300 RACT12-350 RE Output Current [mA] TS Output Voltage Range [VDC] C Input Voltage Range [VAC] RE Part Number PL U D IA N T PRO M M Model Numbering RACT12-___ Output Power Output Current IEC/EN61347 certified IEC/EN61347-2-13 certified EN61547 certified EN62493 certifed EN55015 compliant CB report Specifications (measured @ Ta= 25°C, 240VAC, rated load unless otherwise specified) BASIC CHARACTERISTICS Parameter Condition Input Voltage Range Min. Typ. Max. 198VAC 230VAC 264VAC Input Current Inrush Current 80mA full load 5A No Load Power Consumption 1W Input Frequency Range Power Factor 50Hz full load 60Hz 0.95 continued on next page www.recom-power.com REV.: 4/2020 L-1 PDF
Документация на RACT12-350 

Дата модификации: 28.02.2020

Размер: 423.2 Кб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    APC-12-350 (MW)