RD-0505D

DC/DC конвертор: 2 Вт; корпус PCB SIP7; выходов 2: 5В @ 0.2А, -5В @ 0.2А; вход: 4.5...5.5 [5] В; -40...85 °C; изоляция вх-вых: 1 кВ
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Ток 2 выхода
Напряжение изоляции вход-выход
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 30

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
P= P10CU-0505ZLF (PEAK) SIP7 в линейках 20 шт Преобразователь напряжения DC-DC, нестабилизированный, 2Вт, вход 4.5....5.5В, выход ±5В... Суффикс LF означает отсутствие свинца
P= AM2D-0505DZ (AIMTEC) SIP76 1 шт
P= DPU01L-05 (MW) 4 шт
P= AM2D-0505D (AIMTEC) SIP7 DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 2 Вт; #: 2; U вх: 4.5....
P= A0505S-2WR3 (MORNSUN) в линейках 1000 шт
 
P= TMH 0505D (TRACO) SIP7 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 2 Вт; #: 2; U вх: 4.5....
A- TMR 2-1221WIN (TRACO) SIP87 в линейках 10 шт короткого замыкания, перегрузка Защита от КЗ: продолжительная с автовосстановлением
A- G0505S-2WR2 (MORNSUN) SIP76
A- A0505S-2WR2 (MORNSUN) SIP76 1 шт
A- TMV 2-0505DHI (TRACO) SIP76 7 шт
 
A- TEC 2-1221WI (TRACO) 6 шт
A- TES 2N-0521 (TRACO) SMD5 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 2 Вт; #: 2; U вх: 4.5.....
A- E0505S-2WR2 (MORNSUN) SIP76
A- WRE0505S-3WR2 (MORNSUN) SIP87 2 шт
A- RD-0505D/P (RECOM) SIP76 DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 2 Вт; #: 2; U вх: 4.5....
A- TMR 0521 (TRACO) SIP87 в линейках 10 шт Защита от КЗ: продолжительная с автовосстановлением
A- G0505S-2W (MORNSUN) SIP76
 
A- TEL 2-0521 (TRACO) DIP-16 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP16; P вых: 2 Вт; #: 2; U вх: 4.5... Защита от КЗ: продолжительная с автовосстановлением
A- TEN 3-0521N (TRACO) DIP2410
A- TBA 2-0521 (TRACO) 1 шт
A- TDN 3-1221WISM (TRACO) SMD5 в линейках 10 шт
A- TEN 3-0521 (TRACO) DIP-24 в линейках 10 шт Защита от КЗ: продолжительная с автовосстановлением
A- TMR 3-1221WIE (TRACO) SIP87 10 шт
A- THM 3-0521WI (TRACO) DIP-24 в линейках 10 шт
 
A- TEC 3-1221WI (TRACO)
A- TMR 3-0521HI (TRACO) SIP87 30 шт
A- TMR 3-0521 (TRACO) SIP87 в линейках 10 шт Защита от КЗ: продолжительная с автовосстановлением
A- TEC 3-0921 (TRACO)
A- TDN 3-1221WI (TRACO) DIP-6 в линейках 10 шт
A- TEC 2-0921 (TRACO) 10 шт

Файлы 3

показать свернуть
• • • • • • • Features Unregulated Converters 2W dual output converter Industry standard SIP7 packages Power sharing on outputs Optional continuous short circuit protection 1kVDC and 2kVDC basic isolation UL94 V-0 package material Efficiency up to 87% Description The RD series have been specifically designed for applications where dual power rails need to be created from a single rail supply and a low cost solution is required. With efficiencies up to 87%, the full output power is available over the operating temperature range -40°C to +85°C and the converters can be used in ambient temperatures of up to 100°C with derating. The wide selection of industry standard input voltage and output voltage options plus an input to output isolation of 1kVDC or 2kVDC makes these converters suitable for many industrial applications. DC/DC Converter RD 2 Watt SIP7 Dual Output Selection Guide Part Number nom. Input Voltage Output Voltage Output Current Efficiency typ. (1) max. Capacitive Load (2) [VDC] [VDC] [mA] [%] [µF] RD-xx05D (3,4) 5, 12, 24 ±5 ±200 75-86 ±470 RD-xx12D (3,4) 5, 12, 24 ±12 ±84 81-85 ±330 RD-xx15D (3,4) 5, 12, 24 ±15 ±66 82-86 ±330 RD-xx24D 5, 12, 24 ±24 ±42 82-86 ±100 (3,4) Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Max Cap Load is tested at nominal input and full resistive load and is defined as the capacitive load that will allow start up in under 1s without damage to the converter EN60950-1 certified IEC60950-1 certified Model Numbering RD- __ __D/_ Input Voltage Output Voltage Protection (3) Isolation Option (4) Dual Notes: Note3: Note4: standard part is without Continuous Short Circuit Protection add suffix „/P“ for Continuous Short Circuit Protection add suffix „/H“ for 2kVDC Isolation or add suffix „/HP“ for Continuous Short Circuit Protection and 2kVDC Isolation Ordering Examples: RD-123.3D/P: 12V Input Voltage, ±3.3V Output Voltage, Dual Output with continuous short circuit protection RD-0509D/HP: 5V Input Voltage, ±9V Output Voltage, Dual Output with 2kVDC Isolation and continuous short circuit protection www.recom-power.com REV.: 1/2018 ECO-1 PDF
Документация на RD-0505D 

Дата модификации: 15.06.2018

Размер: 1.06 Мб

5 стр.

● ● ● ● ● ● ● Features Unregulated Converters Low Cost 2W Dual Output Converter Industry Standard SIP7 Packages Power Sharing on Outputs Optional Continuous Short Circuit Protected 1kVDC and 2kVDC Isolation Options UL94V-0 Package Material Efficiency to 86 % ECONOLINE DC/DC-Converter with 3 year Warranty The RD series have been specifically designed for applications where dual power rails need to be created from a single rail supply and a low cost solution is required. With efficiencies up to 85%, the full output power is available over the operating temperature range -40°C to +85°C and the converters can be used in ambient temperatures of up to 100°C with derating. The wide selection of industry standard input voltage and output voltage options plus an I/O-Isolation of 1kVDC or 2kVDC makes these converters suitable for many industrial applications. Description 2 Watt SIP7 Dual Output Selection Guide Part Number SIP 7 Output Voltage (VDC) Output Current (mA) Efficiency 2kV Input Voltage (VDC) (%) Max Capacitive Load(1) RD-xx05D (H) 5, 12, 24 ±5 ±200 75-82 ±470µF RD-xx12D (H) 5, 12, 24 ±12 ±84 80-84 ±330µF RD-xx15D (H) 5, 12, 24 ±15 ±66 82-86 ±330µF RD-xx24D (H) 5, 12, 24 ±24 ±42 82-86 ±100µF xx = Input Voltage. Other input and output voltage combinations available on request. * add Suffix “P” for Continuous Short Circuit Protection, e.g. RD-0505D/P, RD-0505D/HP Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range RoHS Output Voltage Accuracy ±5% Line Voltage Regulation 1.2%/1% of Vin typ. Load Voltage Regulation 3.3V output types 20% max. (10% to 100% full load) 5V output type 15% max. 9V, 12V, 15V, 24V output types Output Ripple and Noise (20MHz limited) 70% min. / 80% typ. Minimum Load = 0% Specifications valid for 10% minimum load only. Isolation Voltage Isolation Voltage (tested for 1 second) 1000VDC (rated for 1 minute**) 500VAC / 60Hz H-Suffix (tested for 1 second) 2000VDC H-Suffix (rated for 1 minute**) Derating-Graph (Ambient Temperature) 1000VAC / 60Hz 100 40pF min. / 115pF max. Isolation Resistance 10 GΩ min. 80 1 Second 60 Short Circuit Protection P-Suffix Continuous Operating Temperature Range (free air convection) -40°C to +85°C (see Graph) Storage Temperature Range -55°C to +125°C Relative Humidity 95% RH Package Weight 2.8g Packing Quantity 25 pcs per Tube Detailed Information see Application Notes chapter "MTBF" Report: SPCLVD1109103 using MIL-HDBK 217F 988 x 103 hours using MIL-HDBK 217F 135 x 103 hours Output Power (%) Isolation Capacitance } RD 10% max. 34kHz min. / 50kHz typ. / 85kHz max. Efficiency at Full Load (+85°C) Certifications EN General Safety EN-60950-1 Certified 150mVp-p max. Operating Frequency MTBF (+25°C) 2011/65/EU 6/6 ±10% 40 Safe Operating Area 20 0 -40 0 50 85 Operating Temperature °C 100 150 **Any data referred to in this datasheet are of indivative nature and based on our practical experience only. For further details, please refer to our Application Notes. EN60950-1:2006 + A12:2011 Refer to Application Notes www.recom-international.com REV: 0/2014 E-91 PDF
Документация на серию RD 

Econoline 2014_2010

Дата модификации: 18.02.2014

Размер: 80.3 Кб

2 стр.

Features Unregulated Converters ● ● ● ● ● ● ● ECONOLINE Dual Output from a Single Input Rail 1kVDC & 2kVDC Isolation Power Sharing on Output Optional Continuous Short Circuit Protected Custom Solutions Available UL94V-0 Package Material Efficiency to 86% DC/DC-Converter RD & RC Series 2 Watt SIP7 & DIP14 Dual Output Selection Guide Part Number SIP 7 Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) DIP 14 RD-xx3.3D RD-xx05D RC-xx3.3D (H) 5, 9, 12, 15, 24 ±3.3 ±303 75 RC-xx05D (H) 5, 9, 12, 15, 24 ±5 ±200 75-82 RD-xx09D RC-xx09D (H) 5, 9, 12, 15, 24 ±9 ±111 80-84 RD-xx12D RC-xx12D (H) 5, 9, 12, 15, 24 ±12 ±84 80-84 RD-xx15D RC-xx15D (H) 5, 9, 12, 15, 24 ±15 ±66 82-86 2kV Efficiency (%) RD-xx24D RC-xx24D (H) 5, 9, 12, 15, 24 ±24 ±42 xx = Input Voltage * add Suffix “P” for Continuous Short Circuit Protection, e.g. RD-0505D/P, RD-0505D/HP 82-86 Specifications (Core Operating Area) Input Voltage Range ±10% Output Voltage Accuracy ±5% Line Voltage Regulation Load Voltage Regulation (10% to 100% full load) 3.3V output types 5V output type 9V, 12V, 15V, 24V output types Output Ripple and Noise (20MHz limited) 150mVp-p max. Operating Frequency 70% min. / 80% typ. H-Suffix H-Suffix (tested for 1 second) (long term isolation) 2000VDC min. see Application Notes Isolation Capacitance 10 GΩ min. Short Circuit Protection P-Suffix Operating Temperature Range (free air convection) 1 Second Continuous -40°C to +85°C (see Graph) Storage Temperature Range -55°C to +125°C Relative Humidity 95% RH Package Weight } 100 80 40pF min. / 115pF max. Isolation Resistance (+85°C) (Ambient Temperature) 163mW min. / 223mW typ. / 350mW max. (tested for 1 second) 1000VDC min. (long term isolation) see Application Notes. Output Power (%) No Load Power Consumption Isolation Voltage Rated Working Voltage MTBF (+25°C) Derating-Graph 34kHz min. / 50kHz typ. / 85kHz max. Efficiency at Full Load Isolation Voltage Rated Working Voltage 1.2%/1% of Vin typ. 20% max. 15% max. 10% max. 60 40 Safe Operating Area 20 0 -40 0 50 85 Operating Temperature °C 100 150 2.8g Detailed Information see Application Notes chapter "MTBF" using MIL-HDBK 217F 988 x 10 hours using MIL-HDBK 217F 135 x 103 hours 3 73 PDF
Документация на серию RD 

Дата модификации: 13.09.2006

Размер: 96.7 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.