LD1117S33CTR

STMicroelectronics
Линейный регулятор - [SOT-223]; Тип: Linear Regulator; Uвх: 4.3...15 В; Uвых: 3.24...3.36 В; Регул.: FIX; Iвых: 800 мА; ACCUR: 2 %
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SOT-223
Тип регулятора
Входное напряжение
Выходное напряжение
Внешняя регулировка выходного напряжения
Максимальный выходной ток
Погрешность установки выходного напряжения
Допустимое падение напряжения вход-выход
Примечание LOW DROP FIXED POSITIVE VOLTAGE REGULATOR
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 5

показать свернуть
Тип Наименование Корпус Упаковка i Тип Uвх Uвых Регул. Iвых Iпотр ACCUR Uпадения Примечание T раб Карточка
товара
P- LD1117S33 (ST)
 
— — FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
P- LD1117S33TR (ST)
 
SOT-223 в ленте 2500 шт Линейный стабилизатор напряжения с падением не более 1 V. В корпусе SOТ-223. Выходное н... LOW DROP FIXED POSITIVE VOLTAGE REGULATOR
A- KF33BD-TR (ST)
 
SO-8 SOIC8 в ленте 2500 шт VERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT
A- KF33BD (ST)
 
SO8150127 в линейках 100 шт Линейный регулятор - [SOIC-8-3.9]; Тип: LDO; Uвх: 3.8...20 В; Uвых: 3.234...3.366 В; Ре... VERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT
A- KF33BDT (ST)
 
TO-252-3 DPAK 1 шт Линейный регулятор - [TO-252-3]; Тип: LDO; Uвх: 3.8...20 В; Uвых: 3.234...3.366 В; Регу... VERY LOW DROP VOLTAGE REGULATOR WITH INHIBIT

Файлы 2

показать свернуть
LD1117 Adjustable and fixed low drop positive voltage regulator Datasheet - production data flows mostly into the load. Only a very common 10 µF minimum capacitor is needed for stability. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ± 1 % at 25 °C. The adjustable LD1117 is pin to pin compatible with the other standard. Adjustable voltage regulators maintaining the better performances in terms of drop and tolerance. DPAK TO-220 SOT-223 SO-8 Features • Low dropout voltage (1 V typ.) • 2.85 V device performances are suitable for SCSI-2 active termination • Output current up to 800 mA • Fixed output voltage of: 1.2 V, 1.8 V, 2.5 V, 3.3 V, 5.0 V • Adjustable version availability (VREF = 1.25 V) • Internal current and thermal limit • Available in ± 1 % (at 25 °C) and 2 % in full temperature range • Supply voltage rejection: 75 dB (typ.) Description The LD1117 is a low drop voltage regulator able to provide up to 800 mA of output current, available even in adjustable version (VREF = 1.25 V). Concerning fixed versions, are offered the following output voltages: 1.2 V, 1.8 V, 2.5 V, 2.85 V, 3.3 V and 5.0 V. The device is supplied in: SOT-223, DPAK, SO-8 and TO-220. The SOT223 and DPAK surface mount packages optimize the thermal characteristics even offering a relevant space saving effect. High efficiency is assured by NPN pass transistor. In fact in this case, unlike than PNP one, the quiescent current November 2013 This is information on a product in full production. DocID2572 Rev 33 1/44 www.st.com 44 PDF
Документация на LD1117V-DG 

Adjustable and fixed low drop positive voltage regulator

Дата модификации: 20.11.2013

Размер: 1.6 Мб

44 стр.

LD1117xx Adjustable and fixed low drop positive voltage regulator Datasheet − production data Features ■ Low dropout voltage (1 V typ.) ■ 2.85 V device performances are suitable for SCSI-2 active termination ■ Output current up to 800 mA ■ Fixed output voltage of: 1.2 V, 1.8 V, 2.5 V, 3.3 V, 5.0 V ■ Adjustable version availability (VREF = 1.25 V) ■ Internal current and thermal limit ■ Available in ± 1 % (at 25 °C) and 2 % in full temperature range ■ Supply voltage rejection: 75 dB (typ.) TO-220 SOT-223 Description The LD1117 is a low drop voltage regulator able to provide up to 800 mA of output current, available even in adjustable version (VREF = 1.25 V). Concerning fixed versions, are offered the following output voltages: 1.2 V, 1.8 V, 2.5 V, 2.85 V, 3.3 V and 5.0 V. The 2.85 V type is ideal for SCSI-2 lines active termination. The device is supplied in: SOT-223, DPAK, SO-8 and TO-220. The SOT-223 and DPAK surface mount packages optimize the thermal characteristics even offering a relevant space saving effect. High efficiency is assured by NPN pass transistor. In fact in this case, unlike than PNP one, the quiescent current flows mostly into the load. Only a very common 10 µF minimum capacitor is needed for stability. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ± 1 % at Table 1. DPAK SO-8 25 °C. The adjustable LD1117 is pin to pin compatible with the other standard. Adjustable voltage regulators maintaining the better performances in terms of drop and tolerance. Device summary Part numbers LD1117XX12 LD1117XX25 LD1117XX50 LD1117XX12C LD1117XX25C LD1117XX50C LD1117XX18 LD1117XX33 LD1117XX LD1117XX18C LD1117XX33C LD1117XXC October 2012 This is information on a product in full production. Doc ID 2572 Rev 32 1/41 www.st.com 41 PDF
Документация на серию LD1117XX33C 

Adjustable and fixed low drop positive voltage regulator

Дата модификации: 19.10.2012

Размер: 1.01 Мб

41 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    L296 (ST)