LM2904D

STMicroelectronics
Операционный усилитель - [SOIC-8-3.9]; Тип ОУ: Стандартный; Каналы: 2; Uпит: 3...30 В; Iпотр: 700 мкА; Прог. Кусил.: Нет; GBW: 1.1 МГц
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SO-8 SOIC8
Тип ОУ
Кол-во каналов ОУ
Напряжение питания
Ток собственного потребления
Программируемый коэффициент усиления
Частота единичного усиления
Максимальная скорость нарастания выходного сигнала
Диапазон рабочих температур
Примечание IC OP AMP DUAL LO POWER 8-SOIC
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 4

показать свернуть
Тип Наименование Корпус Упаковка i Тип ОУ Особенность Каналы U пит Iпотр R‑to‑R Прог. Кусил. GBW Скорость Шум T раб Примечание Карточка
товара
P= LM2904DT (ST)
 
SO-8 SOIC8 в ленте 2500 шт — — —
P= LM2904DR (TI)
 
SO-8 SOIC8 в ленте 2500 шт — — —
P= LM2904DG (ONS)
 
SO-8 SOIC8 98 шт Операционный усилитель - [SOIC-8-3.9]; Тип ОУ: Стандартный; Каналы: 2; Uпит: 3...32 В;... — — — IC OPAMP DUAL LOW POWER 8-SOIC
P= LM2904M/NOPB (TI)
 
SO-8 SOIC8 в линейках 95 шт Операционный усилитель - [SOIC-8-3.9]; Тип ОУ: Стандартный; Каналы: 2; Iпотр: 1 мА; Про... — —

Файлы 4

показать свернуть
LM2904, LM2904A LM2904W, LM2904AW Datasheet Low-power dual operational amplifier Features DFN8 2x2 MiniSO8 TSSOP8 SO8 • • • • • • • • Frequency compensation implemented internally Large DC voltage gain: 100 dB Wide bandwidth (unity gain): 1.1 MHz (temperature compensated) Very low supply current/amplifier, essentially independent of supply voltage Low input bias current: 20 nA (temperature compensated) Low input offset current: 2 nA Input common-mode voltage range includes negative rail Differential input voltage range equal to the power supply voltage • Large output voltage swing 0 V to [(VCC +) -1.5 V] Description This circuit consists of two independent, high gain operational amplifiers (op amps) that have frequency compensation implemented internally. They are designed specifically for automotive and industrial control systems. The circuit operates from a single power supply over a wide range of voltages. The low power supply drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, DC gain blocks and all the conventional op amp circuits which can now be more easily implemented in single power supply systems. For example, these circuits can be directly supplied from the standard 5 V which is used in logic systems and easily provides the required electronic interfaces without requiring any additional power supply. Maturity status link Enhanced VIO Enhanced ESD In linear mode, the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from a single power supply. LM2904 LM2904A ✓ LM2904W LM2904AW ✓ ✓ ✓ Related products TSB572 Dual op-amps for lowpower consumption (380 µA with 2.5 MHz GBP) LM2902 LM2902W LM2904WH LM2904AH Quad op-amps version High temperature version (150 °C) DS0508 - Rev 18 - February 2019 For further information contact your local STMicroelectronics sales office. www.st.com PDF
Документация на LM2904D 

Datasheet - LM2904, LM2904A, LM2904W, LM2904AW - Low-power dual operational amplifier

Дата модификации: 22.02.2019

Размер: 893.4 Кб

26 стр.

LM2904, LM2904A Low-power dual operational amplifier Datasheet - production data Related products See LM2904W for enhanced ESD performances Description This circuit consists of two independent, high gain operational amplifiers (op amps) that have frequency compensation implemented internally. They are designed specifically for automotive and industrial control systems. The circuit operates from a single power supply over a wide range of voltages. The low power supply drain is independent of the magnitude of the power supply voltage. Features Frequency compensation implemented internally Large DC voltage gain: 100 dB Wide bandwidth (unity gain): 1.1 MHz (temperature compensated) Very low supply current/amplifier, essentially independent of supply voltage Low input bias current: 20 nA (temperature compensated) Low input offset current: 2 nA Input common-mode voltage range includes negative rail Differential input voltage range equal to the power supply voltage Large output voltage swing 0 V to + ((VCC ) -1.5 V) February 2016 Application areas include transducer amplifiers, DC gain blocks and all the conventional op amp circuits which can now be more easily implemented in single power supply systems. For example, these circuits can be directly supplied from the standard 5 V which is used in logic systems and easily provides the required electronic interfaces without requiring any additional power supply. In linear mode, the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from a single power supply. DocID2471 Rev 17 This is information on a product in full production. 1/24 www.st.com PDF
Документация на LM2904D 

Low-power dual operational amplifier

Дата модификации: 16.02.2016

Размер: 1.16 Мб

24 стр.

LM2904, LM2904A Low-power dual operational amplifier Features ■ Internally frequency-compensated ■ Large DC voltage gain: 100 dB ■ Wide bandwidth (unity gain): 1.1 MHz (temperature compensated) ■ Very low supply current/amplifier, essentially independent of supply voltage ■ Low input bias current: 20 nA (temperature compensated) N DIP8 (Plastic package) ■ Low input offset current: 2 nA ■ Input common-mode voltage range includes negative rail ■ Differential input voltage range equal to the power supply voltage ■ Large output voltage swing 0 V to (VCC+ -1.5 V) D SO-8 (Plastic micropackage) P TSSOP8 (Thin shrink small outline package) Description This circuit consists of two independent, high gain, internally frequency-compensated operational amplifiers designed specifically for automotive and industrial control systems. It operates from a single power supply over a wide range of voltages. The low power supply drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, DC gain blocks and all the conventional op-amp circuits which can now be more easily implemented in single power supply systems. For example, these circuits can be directly supplied from the standard +5 V which is used in logic systems and easily provides the required interface electronics without requiring any additional power supply. S MiniSO-8 Q2 DFN8 2 x 2 mm (Plastic micropackage) Pin connections (top view) In the linear mode, the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from a single power supply. January 2012 Doc ID 2471 Rev 14 1/24 www.st.com 24 PDF
Документация на серию LM2904 

Low-power dual operational amplifier

Дата модификации: 24.01.2012

Размер: 596.4 Кб

24 стр.

    Публикации 3

    показать свернуть
    14 июня 2011
    статья

    Датчик движения на MSP430G2131 – до 50% экономии электроэнергии в освещении

    В настоящее время мы наблюдаем тенденции сокращения энергопотребления во многих сферах жизнедеятельности. Вопросы экономии энергии все чаще поднимаются на уровне правительства и нередко решаются путем наложения санкций на энергозатратные... ...читать

    24 мая 2011
    статья

    Датчик движения на MSP430G2131 – средство экономии электроэнергии в освещении

    В настоящее время мы наблюдаем тенденции сокращения энергопотребления во многих сферах жизнедеятельности. Вопросы экономии энергии все чаще поднимаются на уровне правительства и нередко решаются путем наложения санкций на энергозатратные... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    INA105KP (TI)