NUCLEO-G474RE

ST Microelectronics
Common features STM32 microcontroller in LQFP64 package 1 user LED shared with Arduino™ 1 user and 1 reset push-buttons 32.768 kHz crystal oscillator Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os Flexible power-supply options: ST-LINK, USB VBUS or external sources On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port Comprehensive free software libraries and examples available with the STM32Cube MCU Package Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs Board-specific features External SMPS to generate Vcore logic supply 24 MHz HSE Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector Arm® Mbed Enabled™ compliant
развернуть ▼ свернуть ▲
Внешний вид NUCLEO-G431RB

Технические характеристики

показать свернуть
Ядро
Платформа
Компоненты
Комплектация
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 3

показать свернуть
STM32G474xB STM32G474xC STM32G474xE Arm® Cortex®-M4 32-bit MCU+FPU, up to 512 KB Flash, 170 MHz / 213 DMIPS, 128 KB SRAM, rich analog, math accelerator, 184 ps 12 channels Hi-res timer Datasheet - production data Features • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 170 MHz with 213 DMIPS, MPU, DSP instructions • Operating conditions: – VDD, VDDA voltage range: 1.71 V to 3.6 V WLCSP81 (4.02 x 4.27 mm) LQFP80 (12 x 12 mm) LQFP100 (14 x 14 mm) LQFP128 (14 x 14 mm) – Internal 32 kHz RC oscillator (± 5%) • Memories – 512 Kbytes of Flash memory with ECC support, two banks read-while-write, proprietary code readout protection (PCROP), securable memory area, 1 Kbyte OTP – 96 Kbytes of SRAM, with hardware parity check implemented on the first 32 Kbytes – Routine booster: 32 Kbytes of SRAM on instruction and data bus, with hardware parity check (CCM SRAM) – External memory interface for static memories FSMC supporting SRAM, PSRAM, NOR and NAND memories – Quad-SPI memory interface • Reset and supply management – Power-on/power-down reset (POR/PDR/BOR) – Programmable voltage detector (PVD) – Low-power modes: sleep, stop, standby and shutdown – VBAT supply for RTC and backup registers • Clock management – 4 to 48 MHz crystal oscillator – 32 kHz oscillator with calibration – Internal 16 MHz RC with PLL option (± 1%) This is information on a product in full production. UFQFPN48 (7 x 7 mm) TFBGA100 (8 x 8 mm Pitch 0.8) • Mathematical hardware accelerators – CORDIC for trigonometric functions acceleration – FMAC: filter mathematical accelerator October 2019 LQFP48 (7 x 7 mm) LQFP64 (10 x 10 mm) • Up to 107 fast I/Os – All mappable on external interrupt vectors – Several I/Os with 5 V tolerant capability • Interconnect matrix • 16-channel DMA controller • 5 x 12-bit ADCs 0.25 µs, up to 42 channels. Resolution up to 16-bit with hardware oversampling, 0 to 3.6 V conversion range • 7 x 12-bit DAC channels – 3 x buffered external channels 1 MSPS – 4 x unbuffered internal channels 15 MSPS • 7 x ultra-fast rail-to-rail analog comparators • 6 x operational amplifiers that can be used in PGA mode, all terminals accessible • Internal voltage reference buffer (VREFBUF) supporting three output voltages (2.048 V, 2.5 V, 2.95 V) • 17 timers: – HRTIM (Hi-Resolution and complex waveform builder): 6 x16-bit counters, 184 ps resolution, 12 PWM – 2 x 32-bit timer and 2 x 16-bit timers with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input – 3 x 16-bit 8-channel advanced motor control timers, with up to 8 x PWM DS12288 Rev 2 1/234 www.st.com PDF
Документация на серию STM32G474 

Datasheet - STM32G474xB STM32G474xC STM32G474xE - Arm® Cortex®-M4 32b MCU+FPU, up to 512KB Flash, 170MHz / 213DMIPS, 128KB SRAM, Analog rich, Math accelerator, 184ps 12ch Hi-Res timer The STM32G474...

Дата модификации: 23.10.2020

Размер: 2.77 Мб

234 стр.

RM0440 Reference manual STM32G4 Series 32-bit MCUs advanced Arm®-based Introduction This reference manual targets application developers. It provides complete information on how to use the STM32G4 Series microcontroller memory and peripherals. The STM32G4 Series is a family of microcontrollers with different memory sizes, packages and peripherals. For ordering information, mechanical and electrical device characteristics refer to the corresponding datasheets. For information on the Arm® Cortex®-M4 core, refer to the Cortex®-M4 Technical Reference Manual. Related documents • Cortex®-M4 Technical Reference Manual, available from: http://infocenter.arm.com • STM32G4xx datasheets • STM32F3, STM32F4, STM32G4 and STM32L4 Series Cortex®-M4 programming manual (PM0214) October 2019 RM0440 Rev 2 1/2075 www.st.com 1 PDF
Документация на семейство STM32G4 

STM32G4xx advanced Arm-based 32-bit MCUs - Reference manual This reference manual targets application developers. It provides complete information on how to use the STM32G4xx microcontroller memory...

Дата модификации: 19.10.2020

Размер: 37.09 Мб

2075 стр.

NUCLEO‑XXXXRX NUCLEO‑XXXXRX‑P Data brief STM32 Nucleo-64 boards Features • Common features – STM32 microcontroller in LQFP64 package – – – – 1 user LED shared with Arduino™ 1 user and 1 reset push-buttons 32.768 kHz crystal oscillator Board connectors: – ◦ Arduino™ Uno V3 expansion connector ◦ ST morpho extension pin headers for full access to all STM32 I/Os Flexible power-supply options: ST-LINK, USB VBUS or external sources – NUCLEO-G474RE example. Boards with different references show different layouts. Picture is not contractual. • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port – Comprehensive free software libraries and examples available with the STM32Cube MCU Package – Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs Board-specific features – External SMPS to generate Vcore logic supply – – Product status link 24 MHz HSE Board connectors: ◦ External SMPS experimentation dedicated connector ◦ Micro-AB or Mini-AB USB connector for the ST-LINK NUCLEO-XXXXRX ◦ NUCLEO-F030R8, NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC, NUCLEO-F103RB, NUCLEO-F302R8, NUCLEO-F303RE, NUCLEO-F334R8, NUCLEO-F401RE, NUCLEO-F410RB, NUCLEO-F411RE, NUCLEO-F446RE, NUCLEO-G070RB, NUCLEO-G071RB, NUCLEO-G431RB, NUCLEO-G474RE, NUCLEO-L010RB, NUCLEO-L053R8, NUCLEO-L073RZ, NUCLEO-L152RE, NUCLEO-L452RE, NUCLEO-L476RG. NUCLEO-XXXXRX-P NUCLEO-L412RB-P, NUCLEO-L433RC-P, NUCLEO-L452RE-P. – MIPI® debug connector Arm® Mbed Enabled™ compliant Description The STM32 Nucleo-64 boards provide an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the external SMPS significantly reduces power consumption in Run mode. The Arduino™ Uno V3 connectivity support and the ST morpho headers allow the easy expansion of the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo-64 board does not require any separate probe as it integrates the ST-LINK debugger/programmer. The STM32 Nucleo-64 board comes with the STM32 comprehensive free software libraries and examples available with the STM32Cube MCU Package. DB2196 - Rev 13 - April 2019 For further information contact your local STMicroelectronics sales office. www.st.com PDF
Документация на NUCLEO-G431RB 

Data brief - NUCLEO‑XXXXRX NUCLEO‑XXXXRX‑P - STM32 Nucleo-64 boards The STM32 Nucleo-64 boards provide an affordable and flexible way for users to try out new concepts and build prototypes by choos...

Дата модификации: 17.04.2020

Размер: 23.61 Мб

7 стр.

    Публикации 3

    показать свернуть
    14 сентября
    статья

    Быстрая тригонометрия: математический ускоритель CORDIC в микроконтроллерах STM32G4

    Александр Калачев (г. Барнаул) Модуль математического ускорителя вычисления тригонометрических, логарифмических и гиперболических функций CORDIC, встроенный компанией STMicroelectronics в микроконтроллеры новой серии STM32G4, незаменим в задачах,... ...читать

    24 августа 2020
    статья

    STM32G4. Периферия и таймеры

    Вячеслав Гавриков (г. Смоленск) Цикл статей о новом семействе микроконтроллеров STM32G4 производства STMicroelectronics продолжает обзор периферии и таймеров. Основные разделы статьи: Математический сопроцессор CORDIC Математический ускоритель... ...читать

    05 августа 2020
    статья

    STM32G4. Системная архитектура и режимы питания

    Святослав Зубарев (г. Смоленск) Гибкость работы нового семейства микроконтроллеров STM32G4 производства STMicroelectronics обеспечивает богатая системная архитектура и разнообразие режимов питания. Основные разделы статьи Процессорное ядро ARM... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MSP-EXP430F5529LP (TI)