ST2378ETTR

STMicroelectronics
Преобразователь логического уровня - [TSSOP-20]; Линий: 8; Каналов: 8; В канале: 1; Вход: Logic; Выход: Logic; Особенности: двунаправленный, открытый сток
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус TSSOP-20
Количество линий
Количество каналов
Количество линий в канале
Тип входного сигнала
Тип выходного сигнала
Особенности двунаправленный, открытый сток
Напряжение питания входа
Напряжение питания выхода
Задержка прохождения сигнала (макс)
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
ST2378E 8-bit dual supply 1.71 V to 5.5 V level translator with I/O VCC ±15 kV ESD protection Datasheet - production data Description Flip-Chip20 The ST2378E device is an 8-bit, dual supply, bidirectional level translator with ±15 kV ESD protection on I/Os at VCC side. It is designed to interface data transfer between low voltage ASICs/PLDs and higher voltage systems. Externally applied voltage, VCC and VL, set logic levels at both sides with the range specified as 1.71 V  VL  5.5 V and VL  VCC  5.5 V. For proper operation, VCC should be set higher than VL. TSSOP20 Features  High speed – tPD = 15 ns (max.) at TA = 85 °C – VL = 1.8 V – VCC = 5.5 V  Guaranteed data rate – 13 Mbps (1.8 V  VL  VCC  5.5 V)  Low power dissipation – ITS-VL = ITS-VCC = 1 A (max.) at TA = 85 °C – IQVL = 100 A (max.) at TA = 85 °C – IQCC = 10 A (max.) at TA = 85 °C  Output impedance – |IOHA| = 20 A (min.) at VL = 1.8 V; VCC = 5.5 V – IOLA = 1.0 A (min.) at VL = 1.8 V; VCC = 5.5 V Utilizing a transmission-gate-based design, this device allows bidirectional asynchronous data transfer, which means each channel is allowed to have either VCC to VL or VL to VCC data transfer direction independently and no direction pin is required. The ST2378E device operates at a guaranteed data rate of 13 Mbps over the entire specified operating voltage range. Among the other features, the OE pin allows disable mode operation whereby current consumption is reduced to less than 1 μA. Table 1. Device summary Part number Temp. range (°C) Package Marking  Bidirectional level translation ST2378EBJR -40 to 85 Flip-Chip20 ST2378E  Totem pole and open drain driving for I2C communications ST2378ETTR -40 to 85 TSSOP20 ST2378E  5 V tolerant on enable pin  Wide operating voltage range – VL (opr.) = 1.71 V to VCC – VCC (opr.) = 1.71 V to 5.5 V  ESD performance  HBM > 15 kV ESD protection on I/O VCC lines  Lead-free Flip-Chip and TSSOP package May 2015 This is information on a product in full production. DocID009489 Rev 3 1/20 www.st.com PDF
Документация на ST2378ETTR 

8-bit dual supply 1.71 V to 5.5 V level translator with I/O VCC ± 15 kV ESD protection

Дата модификации: 20.05.2015

Размер: 383.4 Кб

20 стр.

ST2378E 8-bit dual supply 1.71 to 5.5 V level translator with I/O VCC ± 15 KV ESD protection Datasheet − production data Features ■ High speed – tPD = 15 ns (max.) at TA = 85 °C – VL = 1.8 V – VCC = 5.5 V ■ Guaranteed data rate – 13 Mbps (1.8 V ≤ VL ≤ VCC ≤ 5.5 V) ■ Flip-Chip20 Low power dissipation – ITS-VL = ITS-VCC = 1μA (max.) at TA = 85 °C – IQVL = 100 μA (max.) at TA = 85 °C – IQCC = 10μA (max.) at TA = 85 °C ■ Output impedance – |IOHA| = 20 μA (min.) at VL = 1.8 V; VCC = 5.5 V – IOLA = 1.0 μA (min.) at VL = 1.8 V; VCC = 5.5 V ■ Bidirectional level translation ■ Totem pole and open drain driving for I2C communications ■ 5 V tolerant on enable pin ■ Wide operating voltage range – VL (opr.) = 1.71 V to VCC – VCC (opr.) = 1.71 V to 5.5 V ■ ESD performance ■ HBM > 15 KV ESD protection on I/OVCC lines ■ Lead-free Flip-Chip and TSSOP package TSSOP20 Description The ST2378E device is an 8-bit, dual supply, bidirectional level translator with ±15 kV ESD protection on I/Os at VCC side. It is designed to interface data transfer between low voltage ASICs/PLDs and higher voltage systems. Externally applied voltage, VCC and VL, set logic levels at both sides with range specified as 1.71 V ≤ VL ≤ 5.5 V and VL ≤ VCC ≤ 5.5 V. For proper operation, VCC should be set higher than VL. Utilizing a transmission-gate-based design, this device allows bidirectional asynchronous data transfer, which means each channel is allowed to have either VCC to VL or VL to VCC data transfer direction independently and no direction pin is required. The ST2378E device operates at guaranteed data rate of 13 Mbps over the entire specified operating voltage range. Among the other features there is included the OE pin which allows disable mode operation whereby current consumption is reduced to less than 1 µA. September 2012 This is information on a product in full production. Doc ID 9489 Rev 2 1/20 www.st.com 20 PDF
Документация на серию ST2378E 

8-bit dual supply 1.71 to 5.5 V level translator with I/O VCC ± 15 KV ESD protection

Дата модификации: 18.09.2012

Размер: 276.7 Кб

20 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    GTL2002DP.118 (NXP)