STM32F100C8T7B

Микроконтроллер -
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Ядро
Максимальная частота ядра
Объём памяти программ
Тип памяти программ
Объём оперативной памяти
Количество входов/выходов
Интерфейсы I²C, IrDA, LIN, SPI, UART/USART
Периферия DMA, PDR, POR, PVD, PWM, Temp Sensor, WDT
АЦП/ЦАП
Напряжение питания
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
STM32F100x4 STM32F100x6 STM32F100x8 STM32F100xB Low & medium-density value line, advanced ARM®-based 32-bit MCU with 16 to 128 KB Flash, 12 timers, ADC, DAC & 8 comm interfaces Datasheet - production data Features • Core: ARM® 32-bit Cortex®-M3 CPU – 24 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance – Single-cycle multiplication and hardware division • Memories – 16 to 128 Kbytes of Flash memory – 4 to 8 Kbytes of SRAM • Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR and programmable voltage detector (PVD) – 4-to-24 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration • Low power – Sleep, Stop and Standby modes – VBAT supply for RTC and backup registers • Debug mode – Serial wire debug (SWD) and JTAG interfaces • DMA – 7-channel DMA controller – Peripherals supported: timers, ADC, SPIs, I2Cs, USARTs and DACs • 1 × 12-bit, 1.2 µs A/D converter (up to 16 channels) – Conversion range: 0 to 3.6 V – Temperature sensor )%*$ LQFP100 14 × 14 mm LQFP64 10 × 10 mm LQFP48 7 × 7 mm TFBGA64 5 × 5 mm • Up to 12 timers – Up to three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter – 16-bit, 6-channel advanced-control timer: up to 6 channels for PWM output, dead time generation and emergency stop – One 16-bit timer, with 2 IC/OC, 1 OCN/PWM, dead-time generation and emergency stop – Two 16-bit timers, each with IC/OC/OCN/PWM, dead-time generation and emergency stop – 2 watchdog timers (Independent and Window) – SysTick timer: 24-bit downcounter – Two 16-bit basic timers to drive the DAC • Up to 8 communications interfaces – Up to two I2C interfaces (SMBus/PMBus) – Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) – Up to 2 SPIs (12 Mbit/s) – Consumer electronics control (CEC) interface • CRC calculation unit, 96-bit unique ID • ECOPACK® packages Table 1. Device summary Reference Part number • 2 × 12-bit D/A converters STM32F100x4 STM32F100C4, STM32F100R4 • Up to 80 fast I/O ports – 37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant STM32F100x6 STM32F100C6, STM32F100R6 STM32F100x8 STM32F100C8, STM32F100R8, STM32F100V8 STM32F100xB STM32F100CB, STM32F100RB, STM32F100VB November 2016 This is information on a product in full production. DocID16455 Rev 9 1/96 www.st.com PDF
Документация на STM32F100R8T6B 

Low & medium-density value line, advanced ARM®-based 32-bit MCU with 16 to 128 KB Flash, 12 timers, ADC, DAC & 8 comm interfaces

Дата модификации: 24.11.2016

Размер: 1.74 Мб

96 стр.

STM32F100x4 STM32F100x6 STM32F100x8 STM32F100xB Low & medium-density value line, advanced ARM-based 32-bit MCU with 16 to 128 KB Flash, 12 timers, ADC, DAC & 8 comm interfaces Datasheet  production data Features ■ Core: ARM 32-bit Cortex™-M3 CPU – 24 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance – Single-cycle multiplication and hardware division ■ Memories – 16 to 128 Kbytes of Flash memory – 4 to 8 Kbytes of SRAM ■ Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR and programmable voltage detector (PVD) – 4-to-24 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration ■ Low power – Sleep, Stop and Standby modes – VBAT supply for RTC and backup registers ■ Debug mode – Serial wire debug (SWD) and JTAG interfaces ■ DMA – 7-channel DMA controller – Peripherals supported: timers, ADC, SPIs, I2Cs, USARTs and DACs ■ 1 × 12-bit, 1.2 µs A/D converter (up to 16 channels) – Conversion range: 0 to 3.6 V – Temperature sensor ■ 2 × 12-bit D/A converters ■ Up to 80 fast I/O ports – 37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant June 2012 This is information on a product in full production. FBGA LQFP100 14 × 14 mm LQFP64 10 × 10 mm LQFP48 7 × 7 mm TFBGA64 (5 × 5 mm) ■ Up to 12 timers – Up to three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter – 16-bit, 6-channel advanced-control timer: up to 6 channels for PWM output, dead time generation and emergency stop – One 16-bit timer, with 2 IC/OC, 1 OCN/PWM, dead-time generation and emergency stop – Two 16-bit timers, each with IC/OC/OCN/PWM, dead-time generation and emergency stop – 2 watchdog timers (Independent and Window) – SysTick timer: 24-bit downcounter – Two 16-bit basic timers to drive the DAC ■ Up to 8 communications interfaces – Up to two I2C interfaces (SMBus/PMBus) – Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) – Up to 2 SPIs (12 Mbit/s) – Consumer electronics control (CEC) interface ■ CRC calculation unit, 96-bit unique ID ■ ECOPACK® packages Table 1. Device summary Reference Part number STM32F100x4 STM32F100C4, STM32F100R4 STM32F100x6 STM32F100C6, STM32F100R6 STM32F100x8 STM32F100C8, STM32F100R8, STM32F100V8 STM32F100xB STM32F100CB, STM32F100RB, STM32F100VB Doc ID 16455 Rev 7 1/88 www.st.com 1 PDF
Документация на серию STM32F100C8 

Low & medium-density value line, advanced ARM-based 32-bit MCU with 16 to 128 KB Flash, 12 timers, ADC, DAC & 8 comm interfaces

Дата модификации: 08.06.2012

Размер: 1.14 Мб

88 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.