STM32F756ZGY6TR

IC MCU 32BIT 1MB FLASH 143CSP
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Корпус CSP-143 WLCSP143
Ядро
Максимальная частота ядра
Объём памяти программ
Тип памяти программ
Объём оперативной памяти
Количество входов/выходов
  Интерфейсы: CAN, Ethernet, HDMI-CEC, I²C, IrDA, LIN, MMC/SD, SAI, SPDIFRX, SPI, UART/USART, USB OTG
Периферия Brown-out Detect/Reset, DMA, LCD, POR, PWM, WDT
АЦП/ЦАП
Напряжение питания
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
STM32F756xx ARM®-based Cortex®-M7 32b MCU+FPU, 462DMIPS, up to 1MB Flash/320+16+ 4KB RAM, crypto, USB OTG HS/FS, ethernet, 18 TIMs, 3 ADCs, 25 com itf, cam & LCD Datasheet - production data Features &"'! ® ® • Core: ARM 32-bit Cortex -M7 CPU with FPU, adaptive real-time accelerator (ART Accelerator™) and L1-cache: 4KB data cache and 4KB instruction cache, allowing 0-wait state execution from embedded Flash memory and external memories, frequency up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions. • Memories – Up to 1MB of Flash memory – 1024 bytes of OTP memory – SRAM: 320KB (including 64KB of data TCM RAM for critical real-time data) + 16KB of instruction TCM RAM (for critical real-time routines) + 4KB of backup SRAM (available in the lowest power modes) – Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories • Dual mode Quad-SPI • LCD parallel interface, 8080/6800 modes • LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D) • Clock, reset and supply management – 1.7 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – Dedicated USB power – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power – Sleep, Stop and Standby modes – VBAT supply for RTC, 32×32 bit backup registers + 4KB backup SRAM • 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • Up to 18 timers: up to thirteen 16-bit (1x lowpower 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 216 MHz. 2x watchdogs, SysTick timer February 2016 This is information on a product in full production. LQFP100 (14x14 mm) LQFP144 (20x20 mm) LQFP176 (24x24 mm) LQFP208 (28x28 mm) UFBGA176 (10x10 mm) TFBGA216 (13x13 mm) TFBGA100 (8x8 mm) WLCSP143 (4.5x5.8 mm) • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Debug mode – SWD & JTAG interfaces – Cortex®-M7 Trace Macrocell™ • Up to 168 I/O ports with interrupt capability – Up to 164 fast I/Os up to 108 MHz – Up to 166 5 V-tolerant I/Os • Up to 25 communication interfaces – Up to 4× I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/4 UARTs (27 Mbit/s, ISO7816 interface, LIN, IrDA, modem control) – Up to 6 SPIs (up2to 50 Mbit/s), 3 with muxed simplex I S for audio class accuracy via internal audio PLL or external clock – 2 x SAIs (serial audio interface) – 2 × CANs (2.0B active) and SDMMC interface – SPDIFRX interface – HDMI-CEC • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII • 8- to 14-bit parallel camera interface up to 54 Mbyte/s • Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, triple DES, HASH (MD5, SHA-1, SHA-2), and HMAC • True random number generator • CRC calculation unit • RTC: subsecond accuracy, hardware calendar • 96-bit unique ID Table 1. Device summary Reference STM32F756xx DocID027589 Rev 4 Part number STM32F756VG, STM32F756ZG, STM32F756IG, STM32F756BG, STM32F756NG 1/228 www.st.com PDF
Документация на STM32F756IGT6 

ARM®-based Cortex®-M7 32b MCU+FPU, 462DMIPS, up to 1MB Flash/320+16+ 4KB RAM, crypto, USB OTG HS/FS, ethernet, 18 TIMs, 3 ADCs, 25 com itf, cam & LCD

Дата модификации: 16.02.2016

Размер: 3.1 Мб

228 стр.

STM32F756xx ARM®-based Cortex®-M7 32b MCU+FPU, 462DMIPS, up to 1MB Flash/320+16+ 4KB RAM, crypto, USB OTG HS/FS, ethernet, 18 TIMs, 3 ADCs, 25 com itf, cam & LCD Datasheet - production data Features &"'! ® ® • Core: ARM 32-bit Cortex -M7 CPU with FPU, adaptive real-time accelerator (ART Accelerator™) and L1-cache: 4KB data cache and 4KB instruction cache, allowing 0-wait state execution from embedded Flash memory and external memories, frequency up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions. • Memories – Up to 1MB of Flash memory – 1024 bytes of OTP memory – SRAM: 320KB (including 64KB of data TCM RAM for critical real time data) + 16KB of instruction TCM RAM (for critical real time routines) + 4KB of backup SRAM (available in the lowest power modes) – Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories • Dual mode Quad SPI • LCD parallel interface, 8080/6800 modes • LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D) • Clock, reset and supply management – 1.7 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – Dedicated USB power – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power – Sleep, Stop and Standby modes – VBAT supply for RTC, 32×32 bit backup registers + 4KB backup SRAM • 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • Up to 18 timers: up to thirteen 16-bit (1x lowpower 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 216 MHz. 2x watchdogs, SysTick timer May 2015 This is information on a product in full production. LQFP100 (14x14 mm) LQFP144 (20x20 mm) LQFP176 (24x24 mm) LQFP208 (28x28 mm) UFBGA176 (10x10 mm) TFBGA216 (13x13 mm) WLCSP143 (4.5x5.8 mm) • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Debug mode – SWD & JTAG interfaces – Cortex®-M7 Trace Macrocell™ • Up to 168 I/O ports with interrupt capability – Up to 164 fast I/Os up to 108 MHz – Up to 166 5 V-tolerant I/Os • Up to 25 communication interfaces – Up to 4× I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/4 UARTs (27 Mbit/s, ISO7816 interface, LIN, IrDA, modem control) – Up to 6 SPIs (up2to 50 Mbits/s), 3 with muxed simplex I S for audio class accuracy via internal audio PLL or external clock – 2 x SAIs (serial audio interface) – 2 × CANs (2.0B active) and SDMMC interface – SPDIFRX interface – HDMI-CEC • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII • 8- to 14-bit parallel camera interface up to 54 Mbytes/s • Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, triple DES, HASH (MD5, SHA-1, SHA-2), and HMAC • True random number generator • CRC calculation unit • RTC: subsecond accuracy, hardware calendar • 96-bit unique ID Table 1. Device summary Reference STM32F756xx DocID027589 Rev 1 Part number STM32F756VG, STM32F756ZG, STM32F756IG, STM32F756BG, STM32F756NG 1/226 www.st.com PDF
Документация на серию STM32F756 

ARM®-based Cortex®-M7 32b MCU+FPU, 462DMIPS, up to 1MB Flash/320+16+ 4KB RAM, crypto, USB OTG HS/FS, ethernet, 18 TIMs, 3 ADCs, 25 com itf, cam & LCD

Дата модификации: 26.05.2015

Размер: 3.02 Мб

226 стр.

    Публикации 5

    показать свернуть
    20 января 2022
    новость

    Интеграция Azur RTOS в экосистему STM32

    Одним из главным преимуществ микроконтроллеров компании STMicroelectronics является развитая экосистема, включающая в себя большое число высокоуровневых библиотек, примеров и программ, ускоряющих и упрощающих разработку. Часть данной экосистемы... ...читать

    27 мая 2019
    статья

    Микроконтроллеры STM32F7. Часть 4. Экосистема

    Данная серия публикаций основана на материалах цикла STM32F7 Online Training от компании STMicroelectronics. В статьях представлено описание функциональных блоков и инструментов разработки для семейства микроконтроллеров STM32F7. Логически... ...читать

    29 апреля 2019
    статья

    Микроконтроллеры STM32F7. Часть 3. Периферия и таймеры

    Данная серия публикаций основана на материалах цикла STM32F7 Online Training от компании STMicroelectronics. В статьях представлено описание функциональных блоков и инструментов разработки для семейства микроконтроллеров STM32F7. Логически... ...читать

    05 марта 2019
    статья

    Работаем с микроконтроллерами STM32F7. Часть 2. Память и функции безопасности

    Данная серия публикаций основана на материалах цикла STM32F7 Online Training от компании STMicroelectronics. В статьях представлено описание функциональных блоков и инструментов разработки для семейства микроконтроллеров STM32F7. Логически... ...читать

    05 февраля 2019
    статья

    Работаем с микроконтроллерами STM32F7. Часть 1. Системная периферия

    Данная серия публикаций основана на материалах цикла STM32F7 Online Training от компании STMicroelectronics. В статьях представлено описание функциональных блоков и инструментов разработки для семейства микроконтроллеров STM32F7. Логически... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.