STM32G473VCT3

STM32G473xB STM32G473xC STM32G473xE Arm® Cortex®-M4 32-bit MCU+FPU, up to 512 KB Flash, 170 MHz / 213DMIPS, 128 KB SRAM, rich analog, math accelerator Datasheet - production data Features • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 170 MHz with 213 DMIPS, MPU, DSP instructions •...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Корпус LQFP-100
Ядро
Максимальная частота ядра
Объём памяти программ
Тип памяти программ
Объём оперативной памяти
Количество входов/выходов
  Интерфейсы: FDCAN, I²C, IrDA, LIN, SPI, SAI, SPI, UART/USART, USB2.0 FS/ USB Type-C, LPUART, FMC
Периферия DMA, PWM, WDT, CORDIC, FMAC, OPAMP, Comparators, LPTIM
АЦП/ЦАП
Напряжение питания
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
STM32G473xB STM32G473xC STM32G473xE Arm® Cortex®-M4 32-bit MCU+FPU, up to 512 KB Flash, 170 MHz / 213DMIPS, 128 KB SRAM, rich analog, math accelerator Datasheet - production data Features • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 170 MHz with 213 DMIPS, MPU, DSP instructions • Operating conditions: – VDD, VDDA voltage range: 1.71 V to 3.6 V WLCSP81 (4.02 x 4.27 mm) LQFP80 (12 x 12 mm) LQFP100 (14 x 14 mm) LQFP128 (14 x 14 mm) – Internal 32 kHz RC oscillator (± 5%) • Memories – 512 Kbytes of Flash memory with ECC support, two banks read-while-write, proprietary code readout protection (PCROP), securable memory area, 1 Kbyte OTP – 96 Kbytes of SRAM, with hardware parity check implemented on the first 32 Kbytes – Routine booster: 32 Kbytes of SRAM on instruction and data bus, with hardware parity check (CCM SRAM) – External memory interface for static memories FSMC supporting SRAM, PSRAM, NOR and NAND memories – Quad-SPI memory interface • Reset and supply management – Power-on/power-down reset (POR/PDR/BOR) – Programmable voltage detector (PVD) – Low-power modes: sleep, stop, standby and shutdown – VBAT supply for RTC and backup registers • Clock management – 4 to 48 MHz crystal oscillator – 32 kHz oscillator with calibration – Internal 16 MHz RC with PLL option (± 1%) This is information on a product in full production. UFQFPN48 (7 x 7 mm) TFBGA100 (8 x 8 mm Pitch 0.8) • Mathematical hardware accelerators – CORDIC for trigonometric functions acceleration – FMAC: filter mathematical accelerator October 2019 LQFP48 (7 x 7 mm) LQFP64 (10 x 10 mm) • Up to 107 fast I/Os – All mappable on external interrupt vectors – Several I/Os with 5 V tolerant capability • Interconnect matrix • 16-channel DMA controller • 5 x 12-bit ADCs 0.25 µs, up to 42 channels. Resolution up to 16-bit with hardware oversampling, 0 to 3.6 V conversion range • 7 x 12-bit DAC channels – 3 x buffered external channels 1 MSPS – 4 x unbuffered internal channels 15 MSPS • 7 x ultra-fast rail-to-rail analog comparators • 6 x operational amplifiers that can be used in PGA mode, all terminals accessible • Internal voltage reference buffer (VREFBUF) supporting three output voltages (2.048 V, 2.5 V, 2.95 V) • 1617 timers: – 2 x 32-bit timer and 2 x 16-bit timers with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input – 3 x 16-bit 8-channel advanced motor control timers, with up to 8 x PWM channels, dead time generation and emergency stop DS12712 Rev 2 1/223 www.st.com PDF
Документация на серию STM32G473 

Datasheet - STM32G474xB STM32G474xC STM32G474xE - Arm® Cortex®-M4 32b MCU+FPU, up to 512KB Flash, 170MHz / 213DMIPS, 128KB SRAM, Analog rich, Math accelerator, 184ps 12ch Hi-Res timer The STM32G474...

Дата модификации: 23.10.2020

Размер: 2.65 Мб

223 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.