STM32L152RET6

IC MCU 32BIT 512KB FLASH 64LQFP
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус LQFP-64
Ядро
Максимальная частота ядра
Объём памяти программ
Тип памяти программ
Объём EEPROM памяти
Объём оперативной памяти
Количество входов/выходов
Интерфейсы I²C, IrDA, LIN, SPI, UART/USART, USB
Периферия Brown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
АЦП/ЦАП
Напряжение питания
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
STM32L151xE STM32L152xE Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3 with 512KB Flash, 80KB SRAM, 16KB EEPROM, LCD, USB, ADC, DAC Datasheet - production data Features • Ultra-low-power platform – 1.65 V to 3.6 V power supply – -40 °C to 105 °C temperature range – 290 nA Standby mode (3 wakeup pins) – 1.11 µA Standby mode + RTC – 560 nA Stop mode (16 wakeup lines) – 1.4 µA Stop mode + RTC – 11 µA Low-power run mode down to 4.6 µA in Low-power sleep mode – 195 µA/MHz Run mode – 10 nA ultra-low I/O leakage – 8 µs wakeup time ® ® • Core: ARM Cortex -M3 32-bit CPU – From 32 kHz up to 32 MHz max – 1.25 DMIPS/MHz (Dhrystone 2.1) – Memory protection unit • Up to 34 capacitive sensing channels • CRC calculation unit, 96-bit unique ID • Reset and supply management – Low-power, ultrasafe BOR (brownout reset) with 5 selectable thresholds – Ultra-low-power POR/PDR – Programmable voltage detector (PVD) • Clock sources – 1 to 24 MHz crystal oscillator – 32 kHz oscillator for RTC with calibration – Internal 16 MHz oscillator factory trimmed RC(+/-1%) with PLL option – Internal low-power 37 kHz oscillator – Internal multispeed low-power 65 kHz to 4.2 MHz oscillator – PLL for CPU clock and USB (48 MHz) • Up to 116 fast I/Os (102 I/Os 5V tolerant), all mappable on 16 external interrupt vectors This is information on a product in full production. UFBGA132 (7 × 7 mm) WLCSP104 (0.4 mm pitch) • Memories – 512 Kbytes of Flash memory with ECC (with 2 banks of 256 Kbytes enabling RWW capability) – 80 Kbytes of RAM – 16 Kbytes of true EEPROM with ECC – 128-byte backup register • LCD driver (except STM32L151xE devices) up to 8x40 segments, contrast adjustment, blinking mode, step-up converter • Rich analog peripherals (down to 1.8 V) – 2x operational amplifiers – 12-bit ADC 1 Msps up to 40 channels – 12-bit DAC 2 ch with output buffers – 2x ultra-low-power comparators (window mode and wake up capability) • DMA controller 12x channels • 11x peripheral communication interfaces – 1x USB 2.0 (internal 48 MHz PLL) – 5x USARTs – Up to 8x SPIs (2x I2S, 3x 16 Mbit/s) – 2x I2Cs (SMBus/PMBus) • 11x timers: 1x 32-bit, 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers (independent and window) • Development support: serial wire debug, JTAG and trace Table 1. Device summary Reference • Pre-programmed bootloader – USB and USART supported August 2017 LQFP144 (20 × 20 mm) LQFP100 (14 × 14 mm) LQFP64 (10 × 10 mm) Part number STM32L151xE STM32L151QE, STM32L151RE, STM32L151VE, STM32L151ZE STM32L152xE STM32L152QE, STM32L152RE, STM32L152VE, STM32L152ZE DocID025433 Rev 9 1/136 www.st.com PDF
Документация на STM32L151QEH6 

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3 with 512KB Flash, 80KB SRAM, 16KB EEPROM, LCD, USB, ADC, DAC

Дата модификации: 29.08.2017

Размер: 1.96 Мб

136 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.