STNS01PUR

STNS01 Li-Ion linear battery charger with LDO Datasheet - production data Description The STNS01 is a linear charger for single-cell LiIon batteries integrating an LDO regulator and several battery protection functions. Features               Charges single-cell Li-Ion batteries with CC/CV algorithm and charge termination Charge current programmable up to 200 mA 1% accuracy on ...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус DFN12
Примечание Battery Charge Controller, PDSO12
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
STNS01 Li-Ion linear battery charger with LDO Datasheet - production data Description The STNS01 is a linear charger for single-cell LiIon batteries integrating an LDO regulator and several battery protection functions. Features               Charges single-cell Li-Ion batteries with CC/CV algorithm and charge termination Charge current programmable up to 200 mA 1% accuracy on floating voltage (4.2 V) Integrated 3.1 V LDO regulator Automatic power path management Battery overcharge protection Battery over-discharge protection Battery overcurrent protection Charging timeout Very low battery leakage in overdischarge/shutdown mode Low quiescent current Charge/fault status output Charger enable input Available in a DFN12L (3x3x0.75 mm) package Applications    Portable MP3 players Portable low-power devices Fitness portable devices December 2017 The STNS01 uses a CC/CV algorithm to charge the battery; the fast-charge current can be programmed using an external resistor. Precharge current and termination current are scaled accordingly. The floating voltage value is 4.2 V. The input supply voltage is normally used to charge the battery and provide power to the LDO regulator. When a valid input voltage is not present and the battery is not empty, the device automatically switches to battery power. The STNS01 integrates overcharge, overdischarge and overcurrent protection circuitry to prevent the battery from being damaged under fault conditions. It also features a charger enable input to stop the charging process when battery overtemperature is detected by an external circuitry. When the shutdown mode is activated, the battery power consumption is reduced to less than 500 nA to maximize battery life during shelf time or shipping. The device is available in the DFN12L (3x3x0.75 mm) package. Table 1: Device summary Order code Package Packing STNS01PUR DFN12L (3x3x0.75 mm) 3000 parts per reel DocID024654 Rev 4 This is information on a product in full production. 1/29 www.st.com PDF
Документация на STNS01PUR 

Li-Ion linear battery charger with LDO

Дата модификации: 19.12.2017

Размер: 2.19 Мб

29 стр.

STNS01 Li-Ion linear battery charger with LDO Datasheet - production data Applications  Portable MP3 players  Portable low-power devices  Fitness portable devices Description The STNS01 is a linear charger for single-cell LiIon batteries integrating an LDO regulator and several battery protection functions. DFN12L (3 x 3 mm²) Features  Charges single-cell Li-Ion batteries with CC-CV algorithm and charge termination  Charge current programmable up to 200 mA  1% accuracy on floating voltage (4.2 V)  Integrated 3.1 V LDO regulator  Automatic power path management  Battery overcharge protection  Battery overdischarge protection  Battery overcurrent protection  Charging timeout The device uses a CC/CV algorithm to charge the battery. The fast-charge current can be programmed using an external resistor. Precharge current and termination current are scaled accordingly. The floating voltage value is 4.2 V. The input supply voltage is normally used to charge the battery and provide power to the LDO regulator. When a valid input voltage is not present and the battery is not empty, the device automatically switches to battery power. The STNS01 integrates overcharge, overdischarge and overcurrent protection circuitry to prevent the battery from being damaged under fault conditions. It also features a charger enable input to stop the charging process when battery overtemperature is detected by external circuitry. When the shutdown mode is activated, the battery power consumption is reduced to less than 500 nA to maximize battery life during shelf time or shipping.The device is available in a 3 × 3 mm² 12-lead DFN package.  Very low battery leakage in overdischarge/shutdown mode  Low quiescent current  Charge/Fault status output  Charger enable input  Available in a 12-lead (3 x 3 mm²) DFN package Table 1. Device summary Order code Package Packaging STNS01PUR DFN12L (3 x 3 mm²) 3000 parts per reel May 2013 This is information on a product in full production. DocID024654 Rev 1 1/29 www.st.com 29 PDF
Документация на серию STNS01 

Li-Ion linear battery charger with LDO

Дата модификации: 17.05.2013

Размер: 2.21 Мб

29 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.