TBA 1-2421E

TRACO
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing...
развернуть ▼ свернуть ▲
Внешний вид серии TBA1E

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
КПД
Напряжение изоляции вход-выход
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 26

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- A2405S-1WR3 (MORNSUN)
 
— 1 шт — — — — — — —
A- WRE2405S-1WR2 (MORNSUN)
 
SIP87 — — — — — — —
A- TBA 1-2421HI (TRACO)
 
— 1 шт — — — — — — — — —
A- A2405XT-1WR3 (MORNSUN)
 
— в линейках 50 шт — — — — — — —
A- TMA 2405D (TRACO)
 
SIP6 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 21.6... — — — — — — — —
A- DETN01N-05 (MW)
 
— — — — — — — —
A- DETN01N-05N (MW)
 
—
 
 — — — — — — — —
A- DPU01N-05 (MW)
 
— 1 шт — — — — — — —
A- MDD01N-05 (MW)
 
SIP7 11 шт — — — — — — —
A- A2405S-1WR2 (MORNSUN)
 
SIP76 в линейках 82 шт — — — — — — —
A- A2405XT-1WR3-TR (MORNSUN)
 
—
 
 — — — — — — — —
A- IE2405KS-1WR3 (MORNSUN)
 
—
 
 — — — — — — — —
A- G2405S-1WR2 (MORNSUN)
 
SIP76 — — — — — — —
A- IA2405KS-1WR3 (MORNSUN)
 
—
 
 — — — — — — — —
A- G2405S-1WR3 (MORNSUN)
 
— — — — — — — — — —
A- G2405WS-1WR3 (MORNSUN)
 
— — — — — — — — —
A- E2405D-1WR3 (MORNSUN)
 
—
 
 — — — — — — — —
A- E2405S-1WR3 (MORNSUN)
 
— в линейках 50 шт — — — — — — —
A- E2405XT-1WR3 (MORNSUN)
 
— в линейках 50 шт — — — — — — —
A- WRA2405S-1WR2 (MORNSUN)
 
SIP87 1 шт — — — — — — —
A- WRA2405SD-1WR2 (MORNSUN)
 
—
 
 — — — — — — — —
A- WRA2405ST-1WR2 (MORNSUN)
 
—
 
 — — — — — — — —
A- UWE1205S-1WR3 (MORNSUN)
 
— 1 шт — — — — — — —
A- TMV 2405D (TRACO)
 
SIP7 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 21.6... короткого замыкания, перенапряжения, перегрева — — — — — — — —
A- TES 1-2421 (TRACO)
 
SMD8 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 2; U вх: 21.6.... — — — — — — — —
A- TES 1-2421V (TRACO)
 
SMD1210 — — — — — —

Файлы 2

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converter TBA 1E Series, 1 Watt • • • Continuous short circuit protection • Input voltage ranges (±10%): 5, 12, 24 VDC • • • • High efficiency up to 82% I/O isolation: 1'060 VAC Operating temperature range -40 to +85 °C without derating SIP-7 package Unregulated outputs The TBA 1E is a 1 Watt DC/DC SIP converter series which is specifically designed to offer a low-cost solution with no concession on quality and lifetime. The new design improves on the industry standard features and offers an integrated continuous short circuit protection circuit, an operating temperature range from –40°C to 85°C without derating and I/O-isolation of 1’500 VDC. It offers a broad application range in any space and cost critical application. 3-year product waranty Models Order Code Input Voltage Range TBA 1-0511E TBA 1-0512E TBA 1-0513E TBA 1-0521E TBA 1-0522E TBA 1-0523E TBA 1-1211E TBA 1-1212E TBA 1-1213E TBA 1-1221E TBA 1-1222E TBA 1-1223E TBA 1-2411E TBA 1-2412E TBA 1-2413E TBA 1-2421E TBA 1-2422E TBA 1-2423E www.tracopower.com 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 200 mA 84 mA 66 mA 100 mA 41 mA 33 mA 200 mA 84 mA 66 mA 100 mA 41 mA 33 mA 200 mA 84 mA 66 mA 100 mA 41 mA 33 mA April 27, 2020 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 100 mA 41 mA 33 mA –5 VDC –12 VDC –15 VDC 100 mA 41 mA 33 mA –5 VDC –12 VDC –15 VDC 100 mA 41 mA 33 mA typ. 79 % 82 % 82 % 79 % 82 % 82 % 79 % 80 % 80 % 79 % 80 % 80 % 79 % 82 % 82 % 79 % 82 % 82 % Page 1 / 3 PDF
Документация на серию TBA1E 

TBA 1E Datasheet 1 Watt DC/DC converter, industrial, ±10% input, short circuit protection, unregulated, encapsulated, SIP-7

Дата модификации: 27.04.2020

Размер: 1010.5 Кб

3 стр.

    Публикации 0

    показать свернуть

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DDR-120A-12 (MW)