TDN 1-2410WI

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 13.2×9.1×10.2 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 24

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- DCR012403U (TI) TSSOP12 в линейках 28 шт
 
короткого замыкания, перегрева Модульный миниатюрный DC/DC преобразователь
A- DCR011203U/1K (TI) TSSOP12 1000 шт
 
Модульный миниатюрный DC/DC преобразователь
A- F2403S-1WR3 (MORNSUN) 1 шт
A- IB2403LS-1WR3 (MORNSUN) 1 шт
 
A- IF2403S-1WR3 (MORNSUN) в линейках 50 шт
A- B1203LS-1WR3 (MORNSUN) в линейках 200 шт
A- B1203S-1WR3 (MORNSUN) в линейках 100 шт
A- P6AU-243R3ELF (PEAK) SIP4 в линейках 40 шт Преобразователь напряжения DC-DC, нестабилизированный, 1Вт, вход 24±10%В, выход 3.3В±5%... Суффикс LF означает отсутствие свинца
A- PSD-123R3ELF (PEAK) SMD8 в линейках 15 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD8; P вых: 1 Вт; #: 1; U вх: 10.8...
A- DCR011203P (TI) DIP2410 20 шт DC-DC модульный преобразователь - Монтаж: на плату, PDIP-10; P вых: 1 Вт; #: 1; U вх: 1... короткого замыкания, перегрева Модульный миниатюрный DC/DC преобразователь
A- DCR011203U (TI) SOP12 в линейках 28 шт
 
короткого замыкания, перегрева Модульный миниатюрный DC/DC преобразователь
A- DCR011203UE4 (TI) TSSOP12 28 шт
 
Модульный миниатюрный DC/DC преобразователь
A- TEC 2-2410 (TRACO) в линейках 10 шт
A- F1203S-1WR3 (MORNSUN) в линейках 50 шт
A- DCR012403P (TI) DIP-10 PDIP10 20 шт
 
Модульный миниатюрный DC/DC преобразователь
A- TRV 1-1210M (TRACO) SIP9
A- TES 1-1210V (TRACO) SMD1210 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 1; U вх: 10.8....
A- TRV 1-1510M (TRACO) SIP9
A- TRV 1-2410M (TRACO) SIP9
A- TES 1-2410V (TRACO) SMD1210 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 1; U вх: 21.6....
A- TEC 2-0910 (TRACO) 3 шт
A- TMV 1203SHI (TRACO) SIP7 20 шт
A- TEC 2-1210 (TRACO) 10 шт
A- TEC 2-2410WI (TRACO) в линейках 2 шт

Файлы 2

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converter TDN 1WI Series, 1 Watt • Compact DIP package 13,2 x 9,1 x 10,2 mm • Fully regulated outputs • I/O-isolation 1‘600 VDC • Operating temperature range –40°C to +90°C without derating • Short circuit protection • Remote On/Off • 3-year product warranty • Designed to meet UL 62368-1 (UL 60950-1) Also see: TDN 1WISM, SMD version www.tracopower.com/products/tdn1wism.pdf The TDN 1WI Series comprises 1 Watt fully regulated, high performance DC/ DC converters. They come in a compact cubical package of only 1.23 cm3. Full load operation is reliable up tp 90°C environment temperature. With 1’600 VDC I/O-isolation voltage, external On/Off, and short current protection they cover a wide range of application when space is limited. The input of the converters is designed for a wide voltage range (4:1) and minimum load is not required. The functional I/O-isolation system is designed to meet IEC/EN 62368-1 with a test voltage (60 s) of 1500 VDC. Models Order code Input voltage Output voltage Output current max. Efficiency typ. TDN 1-1210WI 3.3 VDC 300 mA 77 % 79 % TDN 1-1211WI 5.0 VDC 200 mA TDN 1-1219WI 9.0 VDC 112 mA 79 % TDN 1-1212WI 12 VDC 90 mA 81 % TDN 1-1213WI 4.5 – 18 VDC 15 VDC 70 mA 81 % TDN 1-1215WI (12 VDC nominal) 24 VDC 45 mA 80 % ± 5.0 VDC ±100 mA 77 % TDN 1-1221WI TDN 1-1222WI ±12 VDC ±45 mA 80 % TDN 1-1223WI ±15 VDC ±35 mA 81 % TDN 1-2410WI 3.3 VDC 300 mA 76 % TDN 1-2411WI 5.0 VDC 200 mA 78 % TDN 1-2419WI 9.0 VDC 112 mA 79 % TDN 1-2412WI 12 VDC 90 mA 81 % 15 VDC 70 mA 81 % Models TDN 1-2413WI 9 – 36 VDC TDN 1-2415WI (24 VDC nominal) 24 VDC 45 mA 80 % TDN 1-2421WI ± 5.0 VDC ±100 mA 77 % TDN 1-2422WI ±12 VDC ±45 mA 80 % TDN 1-2423WI ±15 VDC ±35 mA 81 % TDN 1-4810WI 3.3 VDC 300 mA 75 % TDN 1-4811WI 5.0 VDC 200 mA 78 % TDN 1-4819WI 9.0 VDC 112 mA 79 % TDN 1-4812WI 12 VDC 90 mA 81 % TDN 1-4813WI 18 – 75 VDC 15 VDC 70 mA 81 % TDN 1-4815WI (48 VDC nominal) 80 % 24 VDC 45 mA TDN 1-4821WI ± 5.0 VDC ±100 mA 77 % TDN 1-4822WI ±12 VDC ±45 mA 80 % TDN 1-4823WI ±15 VDC ±35 mA 81 % www.tracopower.com Page 1 of 3 PDF
Документация на серию TDN 1WI 

TDN 1WI Datasheet

Дата модификации: 28.05.2018

Размер: 174.2 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.