TDR 3-0523

TRACO
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 20

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- WRA1215P-3WR2 (MORNSUN)
 
в линейках 30 шт
 
A- DPBW03F-15 (MW)
 
10 шт короткого замыкания, перегрузки, пониженного входного напряжения
A- TMR 3-2423WI (TRACO)
 
SIP87 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP8; P вых: 3 Вт; #: 2; U вх: 9...... Защита от КЗ: продолжительная с автовосстановлением
A- TDR 3-0523SM (TRACO)
 
SMD148 1 шт
A- TEN 3-0523 (TRACO)
 
DIP-24 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 2; U вх: 4.5... короткого замыкания, перенапряжения, перегрева Защита от КЗ: продолжительная с автовосстановлением
A- TEN 3-1223 (TRACO)
 
DIP-24 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 2; U вх: 9..... Защита от КЗ: продолжительная с автовосстановлением
A- TES 3-1223 (TRACO)
 
SMD5 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 3 Вт; #: 2; U вх: 9...1...
A- DLC03A-15 (MW)
 
DIP168 короткого замыкания, перегрузки, перенапряжения
A- DLW05A-15 (MW)
 
2X1INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 5 Вт; #: 2; U вх: ... короткого замыкания, перегрузки
A- WRA1215S-3WR2 (MORNSUN)
 
SIP87 1 шт
A- DCWN03A-15 (MW)
 
в линейках 25 шт короткого замыкания, перегрузки, перенапряжения
A- MDD03F-15 (MW)
 
A- DCWN03E-15 (MW)
 
5 шт короткого замыкания, перегрузки, перенапряжения
A- WRE0515S-3WR2 (MORNSUN)
 
SIP87
A- WRE1215S-3WR2 (MORNSUN)
 
SIP87
A- WRA0515P-3WR2 (MORNSUN)
 
 
A- WRA0515S-3WR2 (MORNSUN)
 
SIP87 в линейках 5 шт
A- WRA1215SD-3WR2 (MORNSUN)
 
 
A- WRA1215ST-3WR2 (MORNSUN)
 
A- FDD03-15D4 (CHINFA)
 
DIP-24 в линейках 15 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 2; U вх: 9.....

Файлы 3

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TDR 3 Series, 3 Watt Features ◆ Compact design in SMD or DIP package ◆ Wide 2:1 input voltage range ◆ Fully regulated outputs ◆ Low ripple and noise ◆ No minimum load required ◆ Temperature range –40°C to +85°C ◆ I/O isolation 1500 VDC ◆ Continuous short-circuit protection ◆ Remote On/Off control ◆ Fully RoHS compliant ◆ 3-year product warranty UL 60950-1 The TDR-3 series is a family of compact 3 W dc/dc-converters with 2:1 input voltage ranges and tightly regulated output voltages even under no load conditions. The product is available in SMD-package or in DIP-package. They work with high efficiency over the full load range and come with a remote On/Off input. The usability in temperature ranges of up to 85°C, continuous short circuit protection and excellent immunity against environmental influences make these converters very reliable. A TDR-3 converter is the ideal solution for space critical high end applications in communication equipment, instrumentation and industrial electronics. Models Order code DIP models TDR 3-0511 Order code SMD models TDR 3-0511SM TDR 3-0512 TDR 3-0512SM TDR 3-0513 TDR 3-0513SM TDR 3-0522 TDR 3-0522SM TDR 3-0523 TDR 3-1211 TDR 3-1212 TDR 3-1212SM TDR 3-1213 TDR 3-1213SM TDR 3-1222 TDR 3-1222SM TDR 3-1223 Input voltage range Output voltage 5.0 VDC 4.5 – 9.0 VDC 12 VDC Output current max. 600 mA Efficiency typ. 79 % 250 mA 80 % 15 VDC 200 mA 81 % ±12 VDC ±125 mA 80 % TDR 3-0523SM ±15 VDC ±100 mA 81 % TDR 3-1211SM 5.0 VDC 600 mA 81 % 12 VDC 250 mA 82 % (5 VDC nominal) 9 – 18 VDC 15 VDC 200 mA 82 % ±12 VDC ±125 mA 82 % TDR 3-1223SM ±15 VDC ±100 mA 83 % TDR 3-2411 TDR 3-2411SM 5.0 VDC 600 mA 81 % TDR 3-2412 TDR 3-2412SM 12 VDC 250 mA 82 % TDR 3-2413 TDR 3-2413SM TDR 3-2422 TDR 3-2422SM TDR 3-2423 (12 VDC nominal) 18 – 36 VDC 15 VDC 200 mA 83 % ±12 VDC ±125 mA 83 % TDR 3-2423SM ±15 VDC ±100 mA 83 % TDR 3-4811 TDR 3-4811SM 5.0 VDC 600 mA 81 % TDR 3-4812 TDR 3-4812SM 12 VDC 250 mA 82 % TDR 3-4813 TDR 3-4813SM 15 VDC 200 mA 82 % TDR 3-4822 TDR 3-4822SM ±12 VDC ±125 mA 83 % TDR 3-4823 TDR 3-4823SM ±15 VDC ±100 mA 83 % http://www.tracopower.com (24 VDC nominal) 36 – 75 VDC (48 VDC nominal) Page 1 of 4 PDF
Документация на серию TDR3SM 

Дата модификации: 22.02.2013

Размер: 455.6 Кб

4 стр.

DC/DC Converters TDR 3 Series, 3 Watt Features ◆ Compact design in SMD or DIP package ◆ Wide 2:1 input voltage range ◆ Fully regulated outputs ◆ Low ripple and noise ◆ No minimum load required ◆ Temperature range –40°C to +85°C ◆ I/O isolation 1500 VDC ◆ Continuous short-circuit protection ◆ Remote On/Off control ◆ Fully RoHS compliant ◆ 3-year product warranty UL 60950-1 The TDR-3 series is a family of compact 3 W dc/dc-converters with 2:1 input voltage ranges and tightly regulated output voltages even under no load conditions. The product is available in SMD-package or in DIP-package. They work with high efficiency over the full load range and come with a remote On/Off input. The usability in temperature ranges of up to 85°C, continuous short circuit protection and excellent immunity against environmental influences make these converters very reliable. A TDR-3 converter is the ideal solution for space critical high end applications in communication equipment, instrumentation and industrial electronics. Models Order code DIP models TDR 3-0511 Order code SMD models TDR 3-0511SM TDR 3-0512 TDR 3-0512SM TDR 3-0513 TDR 3-0513SM TDR 3-0522 TDR 3-0522SM TDR 3-0523 TDR 3-1211 TDR 3-1212 TDR 3-1212SM TDR 3-1213 TDR 3-1213SM TDR 3-1222 TDR 3-1222SM TDR 3-1223 Input voltage range Output voltage 5.0 VDC 4.5 – 9.0 VDC 12 VDC Output current max. 600 mA Efficiency typ. 79 % 250 mA 80 % 15 VDC 200 mA 81 % ±12 VDC ±125 mA 80 % TDR 3-0523SM ±15 VDC ±100 mA 81 % TDR 3-1211SM 5.0 VDC 600 mA 81 % 12 VDC 250 mA 82 % (5 VDC nominal) 9 – 18 VDC 15 VDC 200 mA 82 % ±12 VDC ±125 mA 82 % TDR 3-1223SM ±15 VDC ±100 mA 83 % TDR 3-2411 TDR 3-2411SM 5.0 VDC 600 mA 81 % TDR 3-2412 TDR 3-2412SM 12 VDC 250 mA 82 % TDR 3-2413 TDR 3-2413SM TDR 3-2422 TDR 3-2422SM TDR 3-2423 (12 VDC nominal) 18 – 36 VDC 15 VDC 200 mA 83 % ±12 VDC ±125 mA 83 % TDR 3-2423SM ±15 VDC ±100 mA 83 % TDR 3-4811 TDR 3-4811SM 5.0 VDC 600 mA 81 % TDR 3-4812 TDR 3-4812SM 12 VDC 250 mA 82 % TDR 3-4813 TDR 3-4813SM 15 VDC 200 mA 82 % TDR 3-4822 TDR 3-4822SM ±12 VDC ±125 mA 83 % TDR 3-4823 TDR 3-4823SM ±15 VDC ±100 mA 83 % http://www.tracopower.com (24 VDC nominal) 36 – 75 VDC (48 VDC nominal) Page 1 of 4 PDF
Документация на серию TDR3SM 

Дата модификации: 21.12.2012

Размер: 424.9 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.