TEN 3-4810WI

TRACO
DC/DC конвертор: PCB DIP24; 3 Вт; Выход 3.3В / 0.6А; Вход: 18...75 [48] В; -40...85 °C
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 32×20.3×10.2 мм
Рабочая температура
Примечания Защита от КЗ: продолжительная с автовосстановлением
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- N7803-1PV (MW)
 
100 шт короткого замыкания, перегрева, перегрузки
A- NSD05-48S3 (MW)
 
16X1INCH 1 шт DC-DC модульный преобразователь - Монтаж: на плату, 1.6x1 inch; P вых: 5 Вт; #: 1; U вх... перегрузки, перенапряжения, перегрева
A- SKMW06F-03 (MW)
 
1X1INCH в линейках 19 шт
 
DC-DC Regulated Power Supply Module
A- SKMW06G-03 (MW)
 
1X1INCH в линейках 19 шт
 
DC-DC Regulated Power Supply Module
A- WRB1203S-3WR2 (MORNSUN)
 
SIP87 в линейках 30 шт
A- WRB2403P-3WR2 (MORNSUN)
 
в линейках 50 шт
 
A- WRB2403S-3WR2 (MORNSUN)
 
SIP87 в линейках 22 шт
A- WRB2403ZP-3WR2 (MORNSUN)
 
1 шт EN55024, light industry level, criteria A
A- WRB4803S-3WR2 (MORNSUN)
 
SIP87 в линейках 20 шт
A- K7803-1000R3 (MORNSUN)
 
SIP3 в линейках 440 шт
A- K7803T-1000R3 (MORNSUN)
 
SMD10 в линейках 1000 шт
A- K78L03-1000R3 (MORNSUN)
 
SIP3 1 шт
A- TMR 3-2410 (TRACO)
 
SIP87 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP8; P вых: 3 Вт; #: 1; U вх: 18..... Защита от КЗ: продолжительная с автовосстановлением
A- TDN 3-4810WISM (TRACO)
 
SMD5 в линейках 10 шт
A- TSR 1-2433 (TRACO)
 
SIP3 в линейках 10 шт короткого замыкания, перегрева DC/DC преобразователь без гальванической изоляции с высоким КПД
A- TEN 3-2410 (TRACO)
 
DIP-24 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 1; U вх: 18.... Защита от КЗ: продолжительная с автовосстановлением
A- TSRN 1-2433 (TRACO)
 
SIP3 в линейках 10 шт короткого замыкания, перегрева DC/DC преобразователь без гальванической изоляции с высоким КПД
A- TSRN 1-2433SM (TRACO)
 
SMD5 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 3.3 Вт; #: 1; U вх: 4.6... короткого замыкания, перегрева DC/DC преобразователь без гальванической изоляции с высоким КПД
A- THL 3-2410WI (TRACO)
 
DIP-16 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP; P вых: 3 Вт; #: 1; U вх: 9...3...
A- R-78E3.3-1.0 (RECOM)
 
SIP3 в линейках 42 шт
A- SCWN03A-03 (MW)
 
DIP2410 7 шт короткого замыкания, перегрузки, перенапряжения
A- SCWN03B-03 (MW)
 
DIP2410 1 шт короткого замыкания, перегрузки, перенапряжения
A- SCWN03C-03 (MW)
 
DIP2410 короткого замыкания, перегрузки, перенапряжения
A- NSD05-12S3 (MW)
 
16X1INCH 1 шт Преобразователь напряжения DC-DC на плату. 3.96Вт,Uвх=9.2-36В, Uвых=3.3В/1.2А,изоляция ... перегрузки, перенапряжения, перегрева
A- SPBW03F-03 (MW)
 
в линейках 18 шт короткого замыкания, перегрузки, пониженного входного напряжения

Файлы 3

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 3WI Series, 3 Watt CB Scheme Features ◆ Ultra-wide 4:1 input range ◆ Full SMD-Design ◆ High efficiency up to 84% ◆ Extended operating temperature IEC 60950-1 UL 60950-1 range –40°C to +85°C ◆ ◆ ◆ ◆ Excellent load and line regulation Indefinite short-circuit protection I/O isolation 1’500 VDC Input filter to meet EN 55022, Class A and FCC, level A without external components ◆ Shielded metal case with insulated baseplate ◆ Lead free design, fully RoHS compliant ◆ 3-year product warranty The TEN 3WI series is a family of dc-dc converter modules with 3W output power, featuring ultra wide 4:1 input voltage ranges of 9-36VDC or 18-75VDC. They come in a DIP-24 plastic package with industry-standard footprint. A high efficiency up to 84% allows operation ambient temperatures of –40°C to +70°C at full load. A built-in EMI input filter complies with EN 55022,class A without need of external components. Further standard features include over voltage protection and continuous short circuit protection. Typical applications for these converters are battery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where isolated, tightly regulated voltages are required Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 3-2410WI 3.3 VDC 750 mA 75 % TEN 3-2411WI 5 VDC 600 mA 79 % TEN 3-2412WI 9 – 36 VDC 12 VDC 250 mA 81 % TEN 3-2413WI (24 VDC nominal) 15 VDC 200 mA 82 % TEN 3-2422WI ±12 VDC ±125 mA 80 % TEN 3-2423WI ±15 VDC ±100 mA 80 % TEN 3-4810WI 3.3 VDC 750 mA 76 % TEN 3-4811WI 5 VDC 600 mA 80 % TEN 3-4812WI 18 – 75 VDC 12 VDC 250 mA 83 % TEN 3-4813WI (48 VDC nominal) 15 VDC 200 mA 84 % TEN 3-4822WI ±12 VDC ±125 mA 82 % TEN 3-4823WI ±15 VDC ±100 mA 82 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию TEN3WI 

TEN3WI

Дата модификации: 01.02.2013

Размер: 170.8 Кб

3 стр.

DC/DC Converters TEN 3WI Series, 3 Watt RoHS compliant Features ◆ Ultra-wide 4:1 Input Range ◆ Full SMD-Design ◆ High Efficiency up to 84% ◆ Extended Operating Temperature UL 60950-1 Range -40°C to +85°C ◆ ◆ ◆ ◆ Excellent Load and Line Regulation Indefinite Short-circuit Protection I/O-Isolation 1’500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components ◆ Shielded Metal Case with insulated Baseplate ◆ Lead free Design, fully RoHS compliant ◆ 3 Year Product Warranty The TEN 3WI series is a family of dc-dc converter modules with 3W output power, featuring ultra wide 4:1 input voltage ranges of 9-36VDC or 18-75VDC. They come in a DIP-24 plastic package with industry-standard footprint. A high efficiency up to 84% allows operation ambient temperatures of –40°C to +70°C at full load. A built-in EMI input filter complies with EN 55022,class A without need of external components. Further standard features include over voltage protection and continuous short circuit protection. Typical applications for these converters are battery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where isolated, tightly regulated voltages are required Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 3-2410WI 3.3 VDC 750 mA 75 % TEN 3-2411WI 5 VDC 600 mA 79 % TEN 3-2412WI 9 – 36 VDC 12 VDC 250 mA 81 % TEN 3-2413WI (24 VDC nominal) 15 VDC 200 mA 82 % TEN 3-2422WI ± 12 VDC ± 125 mA 80 % TEN 3-2423WI ± 15 VDC ± 100 mA 80 % TEN 3-4810WI 3.3 VDC 750 mA 76 % TEN 3-4811WI 5 VDC 600 mA 80 % TEN 3-4812WI 18 – 75 VDC 12 VDC 250 mA 83 % TEN 3-4813WI (48 VDC nominal) 15 VDC 200 mA 84 % TEN 3-4822WI ± 12 VDC ± 125 mA 82 % TEN 3-4823WI ± 15 VDC ± 100 mA 82 % http://www.tracopower.com Page  of 3 PDF
Документация на серию TEN3WI 

TEN3WI

Дата модификации: 01.09.2006

Размер: 120.4 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.