TEN 30-2411

TRACO
DC/DC конвертор: PCB 2"x1"; 30 Вт; Выход 5.1В / 6А; Вход: 18...36 [24] В; -40...85 °C
развернуть ▼ свернуть ▲
Фотография серии TEN30

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит короткого замыкания, перенапряжения, перегрева
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 50.8×25.4×10.2 мм
Рабочая температура
Примечания Защита от КЗ: продолжительная с автовосстановлением
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 10

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
P= VRB2405LD-30WR3 (MORNSUN)
 
2X1INCH в линейках 3 шт
 
 — — — — — — — — — —
F~ URB2405LD-30WR3 (MORNSUN)
 
2X1INCH 1 шт
 
 — — — — — — — — —
A- TEL 30-2411 (TRACO)
 
2X1INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 30 Вт; #: 1; U вх:... — — — — — — — — — Защита от КЗ: продолжительная с автовосстановлением
A- TEN 30-2411WIN (TRACO)
 
2X1INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 30 Вт; #: 1; U вх:... дистанционные вкл.,/выкл., регулируемый выход короткого замыкания, перенапряжения, перегрева, перегрузки — — — — — — — — — Защита от КЗ: продолжительная с автовосстановлением
A- THN 30-2411WIR (TRACO)
 
— 2 шт КЗ, пониженное входное, перегрузка, перегрев — — — — — — — — — — —
A- THN 30-4811WIR (TRACO)
 
— КЗ, пониженное входное, перегрузка, перегрев — — — — — — — — — — —
A- THN 30-4812WIR (TRACO)
 
—
 
 — — — — — — — — — — — — — — — —
A- TEN 30-1211 (TRACO)
 
2X1INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 30 Вт; #: 1; U вх:... короткого замыкания, перенапряжения, перегрева — — — — — — — — — Защита от КЗ: продолжительная с автовосстановлением
A- TEN 30-4811 (TRACO)
 
2X1INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 30 Вт; #: 1; U вх:... — — — — — — — — — —
A- REC30-245.1SZ (RECOM)
 
2X16INCH
 
 — — — — — — — — — —

Файлы 4

показать свернуть
DC/DC Converters TEN 30 Series, 30 Watt CB Features ◆ Smallest encapsulated 30 W converter ◆ 2’’ x 1’’ x 0.4’’ shielded metal package Scheme UL 60950-1 UL 60950-1 with isolated baseplate ◆ ◆ ◆ ◆ Single- and dual output models I/O isolation voltage 1500 VDC Excellent efficiency up to 91 % Operating temperature range –40°C to +85°C ◆ Remote On/Off ◆ Over-temperature protection ◆ 3-year product warranty The TEN-30 series is the latest generation of high performance dc-dc converter modules setting a new standard concerning power density. This product with 30W comes in an encapsulated, shielded metal package with a footprint of only 1.0” x 2.0”. All models have wide 2:1 input voltage range and precisely regulated, isolated output voltages. Advanced circuit topology provides high efficiency up to 91% which allows an industrial operating temperature range of –40°C to +85°C (with derating). Further features include remote On/Off, trimmable output, under-voltage lockout and overtemperature protection. Typical applications for these converters are mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Ordercode TEN 30-1210 TEN 30-1211 TEN 30-1212 TEN 30-1213 TEN 30-1221 TEN 30-1222 TEN 30-1223 TEN 30-2410 TEN 30-2411 TEN 30-2412 TEN 30-2413 TEN 30-2421 TEN 30-2422 TEN 30-2423 TEN 30-4810 TEN 30-4811 TEN 30-4812 TEN 30-4813 TEN 30-4821 TEN 30-4822 TEN 30-4823 http://www.tracopower.com Input voltage 9 – 18 VDC (nominal 12 VDC) 18 – 36 VDC (nominal 24 VDC) 36 – 75 VDC (nominal 48 VDC) Output voltage Output current max. Efficiency typ. 3.3 VDC 5.1 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 8‘000 mA 6‘000 mA 2‘500 mA 2‘000 mA ±3‘000 mA ±1‘250 mA ±1‘000 mA 85 % 87 % 89 % 89 % 87 % 87 % 87 % 3.3 VDC 5.1 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 8’000 mA 6‘000 mA 2‘500 mA 2‘000 mA ±3‘000 mA ±1‘250 mA ±1‘000 mA 87 % 90 % 91 % 91 % 90 % 89 % 90 % 3.3 VDC 5.1 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 7‘500 mA 6‘000 mA 2‘500 mA 2‘000 mA ±3‘000 mA ±1‘250 mA ±1‘000 mA 87 % 89 % 91 % 91 % 90 % 88 % 89 % Page 1 of 4 PDF
Документация на TEN 30-1212 

datasheet

Дата модификации: 02.02.2021

Размер: 353.7 Кб

4 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 30 Series, 30 Watt CB Features ◆ Smallest encapsulated 30 W converter ◆ 2’’ x 1’’ x 0.4’’ shielded metal package Scheme UL 60950-1 UL 60950-1 with isolated baseplate ◆ ◆ ◆ ◆ ◆ ◆ ◆ Single- and dual output models I/O isolation voltage 1500 VDC Excellent efficiency up to 91 % Operating temp. range –40°C to +85°C Remote On/Off Over-temperature protection 3-year product warranty The TEN-30 series is the latest generation of high performance dc-dc converter modules setting a new standard concerning power density. This product with 30W comes in an encapsulated, shielded metal package with a footprint of only 1.0” x 2.0”. All models have wide 2:1 input voltage range and precisely regulated, isolated output voltages. Advanced circuit topology provides high efficiency up to 91% which allows an industrial operating temperature range of –40°C to +85°C (with derating). Further features include remote On/Off, trimmable output, under-voltage lockout and overtemperature protection. Typical applications for these converters are mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Ordercode TEN 30-1207 TEN 30-1209 TEN 30-1210 TEN 30-1211 TEN 30-1212 TEN 30-1213 TEN 30-1221 TEN 30-1222 TEN 30-1223 TEN 30-2407 TEN 30-2409 TEN 30-2410 TEN 30-2411 TEN 30-2412 TEN 30-2413 TEN 30-2421 TEN 30-2422 TEN 30-2423 TEN 30-4807 TEN 30-4809 TEN 30-4810 TEN 30-4811 TEN 30-4812 TEN 30-4813 TEN 30-4821 TEN 30-4822 TEN 30-4823 http://www.tracopower.com Input voltage 9 – 18 VDC (nominal 12 VDC) 18 – 36 VDC (nominal 24 VDC) 36 – 75 VDC (nominal 48 VDC) Output voltage 1.5 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC Output current max. 8‘500 mA 8‘000 mA 8‘000 mA 6‘000 mA 2‘500 mA 2‘000 mA ±3‘000 mA ±1‘250 mA ±1‘000 mA 8‘500 mA 8‘000 mA 8’000 mA 6‘000 mA 2‘500 mA 2‘000 mA ±3‘000 mA ±1‘250 mA ±1‘000 mA 8‘500 mA 8‘000 mA 7‘500 mA 6‘000 mA 2‘500 mA 2‘000 mA ±3‘000 mA ±1‘250 mA ±1‘000 mA Efficiency typ. 79 % 84 % 85 % 87 % 89 % 89 % 87 % 87 % 87 % 80 % 85 % 87 % 90 % 91 % 91 % 90 % 89 % 90 % 80 % 85 % 87 % 89 % 91 % 91 % 90 % 88 % 89 % Page 1 of 4 PDF
Документация на серию TEN30 

datasheet

Дата модификации: 18.10.2013

Размер: 379.2 Кб

4 стр.

DC/DC Converters TEN 30 Series, 30 Watt Features ◆ Smallest encapsulated 30 W converter ◆ 2’’ x 1’’ x 0.4’’ shielded metal package pending with isolated baseplate ◆ ◆ ◆ ◆ ◆ ◆ ◆ Single- and dual output models I/O isolation voltage 1500 VDC Excellent efficiency up to 91 % Operating temp. range –40 °C to +85 °C Remote On/Off Over-temperature protection 3-year product warranty The TEN-30 series is the latest generation of high performance dc-dc converter modules setting a new standard concerning power density. This product with 30W comes in an encapsulated, shielded metal package with a footprint of only 1.0” x 2.0”. All models have wide 2:1 input voltage range and precisely regulated, isolated output voltages. Advanced circuit topology provides high efficiency up to 91% which allows an industrial operating temperature range of –40°C to +85°C (with derating). Further features include remote On/Off, trimmable output, under-voltage lockout and overtemperature protection. Typical applications for these converters are mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Ordercode TEN 30-1207 TEN 30-1209 TEN 30-1210 TEN 30-1211 TEN 30-1212 TEN 30-1213 TEN 30-1221 TEN 30-1222 TEN 30-1223 TEN 30-2407 TEN 30-2409 TEN 30-2410 TEN 30-2411 TEN 30-2412 TEN 30-2413 TEN 30-2421 TEN 30-2422 TEN 30-2423 TEN 30-4807 TEN 30-4809 TEN 30-4810 TEN 30-4811 TEN 30-4812 TEN 30-4813 TEN 30-4821 TEN 30-4822 TEN 30-4823 http://www.tracopower.com Input voltage 9 – 18 VDC (nominal 12 VDC) 18 – 36 VDC (nominal 24 VDC) 36 – 75 VDC (nominal 48 VDC) Output voltage 1.5 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output current max. 8‘500 mA 8‘000 mA 7‘500 mA 6‘000 mA 2‘500 mA 2‘000 mA ± 3‘000 mA ± 1‘250 mA ± 1‘000 mA 8‘500 mA 8‘000 mA 7’500 mA 6‘000 mA 2‘500 mA 2‘000 mA ± 3‘000 mA ± 1‘250 mA ± 1‘000 mA 8‘500 mA 8‘000 mA 7‘500 mA 6‘000 mA 2‘5000 mA 2‘000 mA ± 3‘000 mA ± 1‘250 mA ± 1‘000 mA Efficiency typ. 79 % 84 % 85 % 87 % 89 % 89 % 87 % 87 % 87 % 80 % 85 % 87 % 90 % 91 % 91 % 90 % 89 % 90 % 80 % 85 % 87 % 89 % 91 % 91 % 90 % 88 % 89 % Page 1 of 4 PDF
Документация на серию TEN30 

ten25

Дата модификации: 25.07.2008

Размер: 587 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DKA30C-15 (MW)