TEN 30-2432WIN

TRACO
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing...
развернуть ▼ свернуть ▲
Фотография серии TEN30WIN

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности дистанционные вкл.,/выкл., регулируемый выход
Комплекс защит короткого замыкания, перенапряжения, перегрева, перегрузки
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Напряжение 3 выхода
Ток 1 выхода
Ток 2 выхода
Ток 3 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 50.8×25.4×10.2 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 10

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- AM30EW-240515TZ (AIMTEC)
 
— 1 шт
 
 — — — — — — —
A- AM30EW-240515TZ-K (AIMTEC)
 
—
 
 — — — — — — —
A- TKA30A-C (MW)
 
2X2INCH DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 30 Вт; #: 3; U вх:... короткого замыкания, перегрузки — — — —
A- TKA30B-C (MW)
 
2X2INCH в линейках 5 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 30 Вт; #: 3; U вх:... короткого замыкания, перегрузки — — — —
A- TKA30C-C (MW)
 
2X2INCH в линейках 5 шт короткого замыкания, перегрузки — — — — — —
A- TEN 30-4832WIN (TRACO)
 
2X1INCH дистанционные вкл.,/выкл., регулируемый выход короткого замыкания, перенапряжения, перегрева, перегрузки — — — — — —
A- TEN 40-4832 (TRACO)
 
2X2INCH 1 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 40 Вт; #: 3; U вх:... короткого замыкания, перенапряжения, перегрева — — — — — Защита от КЗ: продолжительная с автовосстановлением. Указаны шумы на первом выходе
A- RP40-240515TG/HC (RECOM)
 
—
 
 — — — — — — — — — — — —
A- AM30EW-480515TZ (AIMTEC)
 
—
 
 — — — — — — —
A- AM30EW-480515TZ-K (AIMTEC)
 
—
 
 — — — — — — —

Файлы 3

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 30WIN Series, 30 Watt Features ◆ Smallest encapsulated 30 W converter ◆ 2” x 1” x 0.4” shielded metal package ◆ Ultra wide 4:1 input voltage range ◆ Single- dual- and triple output models ◆ Very high efficiency up to 91 % ◆ Operating temp. range –40°C to +75°C ◆ I/O isolation 1500 VDC ◆ Over temperature and short circuit protection ◆ Remote On/Off ◆ Adjustable output voltage ◆ 3-year product warranty CB Scheme UL 60950-1 The TEN 30WIN series is a family of high performance 30W dc-dc converter modules featuring ultra wide 4:1 input voltage ranges in a compact low profile case with industry-standard footprint. Standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout, over temperature and short circuit protection. Typical applications for these products are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. Models Order code TEN 30-2407WIN TEN 30-2409WIN TEN 30-2410WIN TEN 30-2411WIN TEN 30-2412WIN TEN 30-2413WIN TEN 30-2421WIN TEN 30-2422WIN TEN 30-2423WIN TEN 30-2433WIN TEN 30-2434WIN TEN 30-2431WIN TEN 30-2432WIN TEN 30-4807WIN TEN 30-4809WIN TEN 30-4810WIN TEN 30-4811WIN TEN 30-4812WIN TEN 30-4813WIN TEN 30-4821WIN TEN 30-4822WIN TEN 30-4823WIN TEN 30-4833WIN TEN 30-4834WIN TEN 30-4831WIN TEN 30-4832WIN Input voltage range 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) http://www.tracopower.com Output 1 1.5 VDC / 8.5 A 2.5 VDC / 8.0 A 3.3 VDC / 7.5 A 5.1 VDC / 6.0 A 12 VDC / 2.5 A 15 VDC / 2.0 A + 5 VDC / 3.0 A +12 VDC / 1.25 A +15 VDC / 1.0 A 3.3 VDC / 5.0 A 3.3 VDC / 5.0 A 5 VDC / 4.0 A 5 VDC / 4.0 A 1.5 VDC / 8.5 A 2.5 VDC / 8.0 A 3.3 VDC / 7.5 A 5.1 VDC / 6.0 A 12 VDC / 2.5 A 15 VDC / 2.0 A + 5 VDC / 3.0 A +12 VDC / 1.25 A +15 VDC / 1.0 A 3.3 VDC / 5.0 A 3.3 VDC / 5.0 A 5 VDC / 4.0 A 5 VDC / 4.0 A Output 2 Output 3 –5 VDC / 3.0 A –12 VDC / 1.25 A –15 VDC / 1.0 A +12 VDC / 0.42 A +15 VDC / 0.33 A +12 VDC / 0.42 A +15 VDC / 0.33 A –12 VDC / 0.42 A –15 VDC / 0.33 A –12 VDC / 0.42 A –15 VDC / 0.33 A –5 VDC / 3.0 A –12 VDC / 1.25 A –15 VDC / 1.0 A +12 VDC / 0.42 A +15 VDC / 0.33 A +12 VDC / 0.42 A +15 VDC / 0.33 A –12 VDC / 0.42 A –15 VDC / 0.33 A –12 VDC / 0.42 A –15 VDC / 0.33 A Efficiency typ. 80 % 83 % 86 % 88 % 89 % 89 % 88 % 87 % 87 % 86 % 86 % 88 % 88 % 80 % 84 % 86 % 88 % 90 % 91 % 88 % 88 % 88 % 86 % 86 % 88 % 88 % Page 1 of 4 PDF
Документация на серию TEN30WIN 

TEN40

Дата модификации: 14.12.2012

Размер: 287.1 Кб

4 стр.

DC/DC Converters TEN 30WIN Series, 30 Watt Features ◆ Smallest encapsulated 30 W converter ◆ 2” x 1” x 0.4” shielded metal package ◆ Ultra wide 4:1 input voltage range ◆ Single- dual- and triple output models ◆ Very high efficiency up to 91% ◆ Operating temp. range –40 °C to +75 °C ◆ I/O isolation 1500 VDC ◆ Over temperature and short circuit protection ◆ Remote On/Off ◆ Adjustable output voltage ◆ 3-year product warranty pending The TEN 30WIN series is a family of high performance 30W dc-dc converter modules featuring ultra wide 4:1 input voltage ranges in a compact low profile case with industry-standard footprint. Standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout, over temperature and short circuit protection. Typical applications for these products are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. Models Order code TEN 30-2407WIN TEN 30-2409WIN TEN 30-2410WIN TEN 30-2411WIN TEN 30-2412WIN TEN 30-2413WIN TEN 30-2421WIN TEN 30-2422WIN TEN 30-2423WIN TEN 30-2433WIN TEN 30-2434WIN TEN 30-2431WIN TEN 30-2432WIN TEN 30-4807WIN TEN 30-4809WIN TEN 30-4810WIN TEN 30-4811WIN TEN 30-4812WIN TEN 30-4813WIN TEN 30-4821WIN TEN 30-4822WIN TEN 30-4823WIN TEN 30-4833WIN TEN 30-4834WIN TEN 30-4831WIN TEN 30-4832WIN Input voltage range 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) http://www.tracopower.com Output 1 1.5 VDC / 8.5 A 2.5 VDC / 8.0 A 3.3 VDC / 7.5 A 5.1 VDC / 6.0 A 12 VDC / 2.5 A 15 VDC / 2.0 A + 5 VDC / 3.0 A +12 VDC / 1.25 A +15 VDC / 1.0 A 3.3 VDC / 5.0 A 3.3 VDC / 5.0 A 5 VDC / 4.0 A 5 VDC / 4.0 A 1.5 VDC / 8.5 A 2.5 VDC / 8.0 A 3.3 VDC / 7.5 A 5.1 VDC / 6.0 A 12 VDC / 2.5 A 15 VDC / 2.0 A + 5 VDC / 3.0 A +12 VDC / 1.25 A +15 VDC / 1.0 A 3.3 VDC / 5.0 A 3.3 VDC / 5.0 A 5 VDC / 4.0 A 5 VDC / 4.0 A Output 2 Output 3 –5 VDC / 3.0 A –12 VDC / 1.25 A –15 VDC / 1.0 A +12 VDC / 0.42 A +15 VDC / 0.33 A +12 VDC / 0.42 A +15 VDC / 0.33 A –12 VDC / 0.42 A –15 VDC / 0.33 A –12 VDC / 0.42 A –15 VDC / 0.33 A –5 VDC / 3.0 A –12 VDC / 1.25 A –15 VDC / 1.0 A +12 VDC / 0.42 A +15 VDC / 0.33 A +12 VDC / 0.42 A +15 VDC / 0.33 A –12 VDC / 0.42 A –15 VDC / 0.33 A –12 VDC / 0.42 A –15 VDC / 0.33 A Efficiency typ. 80 % 83 % 86 % 88 % 89 % 89 % 88 % 87 % 87 % 86 % 86 % 88 % 88 % 80 % 84 % 86 % 88 % 90 % 91 % 88 % 88 % 88 % 86 % 86 % 88 % 88 % Page 1 of 4 PDF
Документация на серию TEN30WIN 

TEN40

Дата модификации: 17.07.2008

Размер: 503.5 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DKA30C-15 (MW)