TEN 40-1223N

TRACO
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит короткого замыкания, превышения напряжения
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
КПД
Напряжение изоляции вход-выход
Размер 50.8×25.4×10.2 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 24

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- TEN 60-1223N (TRACO)
 
2X1INCH от пониженного входного напряжения
A- TEN 40-2423 (TRACO)
 
2X2INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 40 Вт; #: 2; U вх:... короткого замыкания, перенапряжения, перегрева Защита от КЗ: продолжительная с автовосстановлением
A- TEN 60-2423N (TRACO)
 
2X1INCH 3 шт от пониженного входного напряжения
A- TEQ 40-4823WIR (TRACO)
 
КЗ, перегрузка, перенапряжение
A- TEQ 40-2423WIR (TRACO)
 
КЗ, перегрузка, перенапряжение
A- TEN 40-4823WIE (TRACO)
 
A- TEN 40-4823WI (TRACO)
 
2X2INCH в линейках 5 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 40 Вт; #: 2; U вх:... подстройка выхода, дистанционное управление Защита от КЗ: продолжительная с автовосстановлением
A- TEN 60-2423WIR (TRACO)
 
A- TEN 60-2423WIN (TRACO)
 
2X1INCH подстройка выхода, дистанционное управление
A- TEN 60-4823WIR (TRACO)
 
A- TEN 40-1223E (TRACO)
 
1 шт
A- TEN 40-2423E (TRACO)
 
A- TEN 40-1223 (TRACO)
 
2X2INCH 1 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 40 Вт; #: 2; U вх:... короткого замыкания, перенапряжения, перегрева Защита от КЗ: продолжительная с автовосстановлением
A- TEN 40-2423N (TRACO)
 
2X1INCH 1 шт короткого замыкания, превышения напряжения
A- TEN 40-2423WI (TRACO)
 
2X2INCH в линейках 5 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 40 Вт; #: 2; U вх:... подстройка выхода, дистанционное управление Защита от КЗ: продолжительная с автовосстановлением
A- TEN 40-2423WIE (TRACO)
 
A- TEN 40-2423WIN (TRACO)
 
2X1INCH 3 шт короткого замыкания, перенапряжения, перегрева
A- TEN 40-2423WIR (TRACO)
 
2X1INCH в линейках 10 шт короткого замыкания, перенапряжения, перегрева Защита от КЗ: продолжительная с автовосстановлением
A- TEN 40-2432 (TRACO)
 
2X2INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 40 Вт; #: 3; U вх:... короткого замыкания, перенапряжения, перегрева Защита от КЗ: продолжительная с автовосстановлением
A- RPMD40-2415DG (RECOM)
 
 
A- RP40-240515TG (RECOM)
 
2X2INCH
 
A- RP40-240515TG/HC (RECOM)
 
 
A- RP40-2415DFR/P-HC (RECOM)
 
NSD10
 
EN55024, light industry level, criteria A
A- RP40-2415DGW (RECOM)
 
2X2INCH 1 шт
 

Файлы 3

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 40N Series, 40 Watt CB Features ◆ Highest power density: Scheme IEC 60950-1 UL 60950-1 40 W in 1” x 2” x 0.4” package ◆ ◆ ◆ ◆ ◆ ◆ ◆ Excellent efficiency up to 92 % Output voltage adjustable Remote On/Off Short circuit protection Over voltage protection I/O isolation 1500 VDC Operating temperature range –40°C to +80°C ◆ Fully RoHS compliant ◆ 3-year product warranty The TEN 40N Series is a new range of isolated high performance dc-dc converter modules. Due to the very high efficiency of up to 92% these 40 W converters come with a footprint of only 1.0” x 2.0”. The 15 models have a wide 2:1 input voltage range and a tight output voltage regulation. The output voltage is adjustable by external resistor. Remote On/Off and protection against overpower and overvoltage are standard features of these converters. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Order code Output voltage Output current max. Efficiency TEN 40-1210N 3.3 VDC 8‘000 mA 89 % TEN 40-1211N 5.0 VDC 8’000 mA 89 % 12 VDC 3‘333 mA 89 % 15 VDC 2‘670 mA 90 % 24 VDC 1‘670 mA 91 % TEN 40-1222N ±12 VDC ±1’670 mA 88 % TEN 40-1223N ±15 VDC ±1‘330 mA 88 % TEN 40-2410N 3.3 VDC 8‘000 mA 90 % TEN 40-2411N 5.0 VDC 8’000 mA 91 % 12 VDC 3‘333 mA 91 % 15 VDC 2‘670 mA 91 % 24 VDC 1‘670 mA 91 % TEN 40-2422N ±12 VDC ±1’670 mA 89 % TEN 40-2423N ±15 VDC ±1‘330 mA 89 % TEN 40-4810N 3.3 VDC 8‘000 mA 90 % TEN 40-4811N 5.0 VDC 8’000 mA 91 % 12 VDC 3‘333 mA 92 % 15 VDC 2‘670 mA 92 % 24 VDC 1‘670 mA 91 % TEN 40-4822N ±12 VDC 1’670 mA 89 % TEN 40-4823N ±15 VDC 1‘330 mA 89 % TEN 40-1212N TEN 40-1213N TEN 40-1215N TEN 40-2412N TEN 40-2413N TEN 40-2415N TEN 40-4812N TEN 40-4813N TEN 40-4815N http://www.tracopower.com Input voltage range 9 – 18 VDC (nominal 12 VDC) 18 – 36 VDC (nominal 24 VDC) 36 – 75 VDC (nominal 48 VDC) Page 1 of 4 PDF
Документация на серию TEN40N 

Дата модификации: 14.02.2014

Размер: 256.1 Кб

4 стр.

DC/DC Converters TEN 40N Series, 40 Watt CB Features ◆ Highest power density: Scheme IEC 60950-1 UL 60950-1 40 W in 1” x 2” x 0.4” package ◆ ◆ ◆ ◆ ◆ ◆ ◆ Excellent efficiency up to 92 % Output voltage adjustable Remote On/Off Short circuit protection Over voltage protection I/O isolation 1500 VDC Input filter meets EN 55022, class A and FCC, level A without external components The TEN 40N Series is a new range of isolated high performance dc-dc converter ◆ Operating temperature range –40°C to +80°C ◆ Fully RoHS compliant ◆ 3-year product warranty modules. Due to the very high efficiency of up to 92% these 40 W converters come with a footprint of only 1.0” x 2.0”. The 15 models have a wide 2:1 input voltage range and a tight output voltage regulation. The output voltage is adjustable by external resistor. Remote On/Off and protection against overpower and overvoltage are standard features of these converters. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Order code Output voltage Output current max. Efficiency TEN 40-1210N 3.3 VDC 8‘000 mA 89 % TEN 40-1211N 5.0 VDC 8’000 mA 89 % 12 VDC 3‘333 mA 89 % 15 VDC 2‘670 mA 90 % 24 VDC 1‘670 mA 88 % TEN 40-1222N ±12 VDC ±1’670 mA 88 % TEN 40-1223N ±15 VDC ±1‘330 mA 88 % TEN 40-2410N 3.3 VDC 8‘000 mA 90 % TEN 40-2411N 5.0 VDC 8’000 mA 91 % 12 VDC 3‘333 mA 91 % 15 VDC 2‘670 mA 91 % 24 VDC 1‘670 mA 90 % TEN 40-2422N ±12 VDC ±1’670 mA 89 % TEN 40-2423N ±15 VDC ±1‘330 mA 89 % TEN 40-4810N 3.3 VDC 8‘000 mA 90 % TEN 40-4811N 5.0 VDC 8’000 mA 91 % 12 VDC 3‘333 mA 92 % 15 VDC 2‘670 mA 92 % 24 VDC 1‘670 mA 90 % TEN 40-4822N ±12 VDC 1’670 mA 89 % TEN 40-4823N ±15 VDC 1‘330 mA 89 % TEN 40-1212N TEN 40-1213N TEN 40-1215N TEN 40-2412N TEN 40-2413N TEN 40-2415N TEN 40-4812N TEN 40-4813N TEN 40-4815N http://www.tracopower.com Input voltage range 9 – 18 VDC (nominal 12 VDC) 18 – 36 VDC (nominal 24 VDC) 36 – 75 VDC (nominal 48 VDC) Page 1 of 4 PDF
Документация на серию TEN40N 

Дата модификации: 26.09.2012

Размер: 320.3 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.