TEN 5-0512

TRACO
DC-DC, 6Вт, Uвх=4.5-7B, один выход 12В/500мА, изоляция 1500DC, DIL-24 32х10.2х20.3 мм, -40...+75°С
развернуть ▼ свернуть ▲
Фотография серии TEN5
Чертеж серии TEN5
 
 

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 32×20.3×10.2 мм
Рабочая температура
Примечания Защита от КЗ: продолжительная с автовосстановлением
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 19

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- TMR 6-0512 (TRACO)
 
SIP87 1 шт — — — — — — — — — Защита от КЗ: продолжительная с автовосстановлением
A- TMR 6-0522 (TRACO)
 
SIP87 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP8; P вых: 6 Вт; #: 2; U вх: 4.5.... — — — — — — — Защита от КЗ: продолжительная с автовосстановлением
A- TEN 5-0522 (TRACO)
 
DIP2410 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 2; U вх: 4.5... — — — — — — — Защита от КЗ: продолжительная с автовосстановлением
A- TDN 5-0912WI (TRACO)
 
DIP-6 2 шт — — — — — — — — — —
A- TDN 5-0912WISM (TRACO)
 
SMD5 — — — — — — — — — —
A- TDN 5-0922WI (TRACO)
 
DIP-6 — — — — — — — —
A- CC10-0512SF-E (LAMBDA)
 
DIP-6 5 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP; P вых: 10 Вт; #: 1; U вх: 4.5.... короткого замыкания, перегрузки — — — — — — — — — Имеются модели в корпусах типа SMD и SIP: см. фирменное описание
A- AM6T-0512DZ (AIMTEC)
 
— в линейках 10 шт — — — — — — — —
A- REC5-0512SRW/H2/A (RECOM)
 
DIP-24 CDIP24
 
 — — — — — — — — — —
A- REC5-0512DRW/H/B (RECOM)
 
DIP2410
 
 — — — — — — — — —
A- REC5-0512DRW/H4/C (RECOM)
 
DIP-24 CDIP24
 
 — — — — — — — — —
A- REM10-0512S/A (RECOM)
 
— — — — — — — — — — —
A- RS6-0512S (RECOM)
 
—
 
 — — — — — — — — — —
A- REM10-0512D/A (RECOM)
 
— — — — — — — — — —
A- RS6-0512D (RECOM)
 
SIP87 в линейках 10 шт
 
 — — — — — — — — —
A- SKM10E-12 (MW)
 
— короткого замыкания, перегрузки, перенапряжения, пониженного входного напряжения — — — — — — — — —
A- DKM10E-12 (MW)
 
— 1 шт короткого замыкания, перегрузки, перенапряжения, пониженного входного напряжения — — — — — — —
A- TDN 5-0922WISM (TRACO)
 
SMD5 — — — — — — — —
A- CC6-0512SR-E (LAMBDA)
 
SMD5 1 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 6 Вт; #: 1; U вх: 4.5..... короткого замыкания, перегрузки — — — — — — — — — Имеются модели в корпусах типа SMD и SIP: см. фирменное описание

Файлы 4

показать свернуть
DC/DC Converters TEN 5 Series, 6 Watt CB Features ◆ Wide 2:1 input range ◆ Full SMD-design ◆ High efficiency up to 86% ◆ Extended operating temperature Scheme UL 60950-1 range –40°C to 85°C ◆ I/O isolation 1’500 VDC ◆ Indefinite short circuit protection ◆ Input filter to meet EN 55022, class A and FCC, level A without external components ◆ Shielded metal case with insulated baseplate ◆ 24-pin DIP with industry standard pinout ◆ High reliability, MTBF >1 Mio. h ◆ 3-year product warranty The TEN 5 Series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and good cost /performance ratio. I/O-isolation of 1’500 VDC together with conducted noise compliance to EN 55022-A and FCC level A makes these converters ideal for a wide range of applications in communications, mobile battery powered equipments and industrial systems. Models Ordercode TEN 5-0510 TEN 5-0511 TEN 5-0512 TEN 5-0513 TEN 5-0521 TEN 5-0522 TEN 5-0523 TEN 5-1210 TEN 5-1211 TEN 5-1212 TEN 5-1213 TEN 5-1221 TEN 5-1222 TEN 5-1223 TEN 5-2410 TEN 5-2411 TEN 5-2412 TEN 5-2413 TEN 5-2421 TEN 5-2422 TEN 5-2423 TEN 5-4810 TEN 5-4811 TEN 5-4812 TEN 5-4813 TEN 5-4821 TEN 5-4822 TEN 5-4823 http://www.tracopower.com Input voltage range 4.5 – 7 VDC (5 VDC nominal) 9 – 18 VDC (12 VDC nominal) 18 – 36 VDC (24 VDC nominal) 36 – 75 VDC (48 VDC nominal) Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC Output current max. 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA Efficiency typ. 75 % 79 % 82 % 82 % 79 % 82 % 82 % 77 % 81 % 84 % 84 % 81 % 84 % 84 % 79 % 83 % 86 % 86 % 83 % 86 % 86 % 79 % 83 % 86 % 86 % 83 % 86 % 86 % Page 1 of 3 PDF
Документация на TEN 5-0510 

Дата модификации: 06.10.2021

Размер: 245.3 Кб

3 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 5 Series, 6 Watt CB Features ◆ Wide 2:1 input range ◆ Full SMD-design ◆ High efficiency up to 86% ◆ Extended operating temperature Scheme UL 60950-1 range –40°C to 85°C ◆ I/O isolation 1’500 VDC ◆ Indefinite short circuit protection ◆ Input filter to meet EN 55022, Class A and FCC, level A without external components ◆ Shielded metal case with insulated baseplate ◆ 24-pin DIP with industry standard pinout ◆ High reliability, MTBF >1 Mio. h ◆ 3-year product warranty The TEN 5 Series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and good cost /performance ratio. High efficiency allows an operating temperature range of –40°C to +85°C. I/O-isolation of 1’500 VDC together with conducted noise compliance to EN 55022-A and FCC, level A makes these converters ideal for a wide range of applications in communications, mobile battery powered equipments and industrial systems. Models Ordercode TEN 5-0510 TEN 5-0511 TEN 5-0512 TEN 5-0513 TEN 5-0521 TEN 5-0522 TEN 5-0523 TEN 5-1210 TEN 5-1211 TEN 5-1212 TEN 5-1213 TEN 5-1221 TEN 5-1222 TEN 5-1223 TEN 5-2410 TEN 5-2411 TEN 5-2412 TEN 5-2413 TEN 5-2421 TEN 5-2422 TEN 5-2423 TEN 5-4810 TEN 5-4811 TEN 5-4812 TEN 5-4813 TEN 5-4821 TEN 5-4822 TEN 5-4823 http://www.tracopower.com Input voltage range 4.5 – 7 VDC (5 VDC nominal) 9 – 18 VDC (12 VDC nominal) 18 – 36 VDC (24 VDC nominal) 36 – 75 VDC (48 VDC nominal) Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC Output current max. 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA Efficiency typ. 75 % 79 % 82 % 82 % 79 % 82 % 82 % 77 % 81 % 84 % 84 % 81 % 84 % 84 % 79 % 83 % 86 % 86 % 83 % 86 % 86 % 79 % 83 % 86 % 86 % 83 % 86 % 86 % Page 1 of 3 PDF
Документация на серию TEN5 

Дата модификации: 07.02.2014

Размер: 154.5 Кб

3 стр.

DC/DC Converters TEN 5 Series, 6 Watt RoHS Features ◆ Wide 2:1 Input Range ◆ Full SMD-Design ◆ High Efficiency up to 86% ◆ Extended Operating Temperature compliant UL 60950-1 Range -40°C to 85°C ◆ I/O-isolation 1’500 VDC ◆ Indefinite Short-Circuit Protection ◆ Input Filter meets EN 55022, Class A and FCC, Level A without external Components ◆ Shielded Metal Case with insulated Baseplate ◆ 24-pin DIP with Industry Standard Pinout ◆ High Reliability, MTBF >1 Mio. h ◆ 3 Year Product Warranty The TEN 5 Series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and good cost /performance ratio. High efficiency allows an operating temperature range of -40°C to +85°C. I/O-isolation of 1’500 VDC together with conducted noise compliance to EN 55022-A and FCC, level A makes these converters ideal for a wide range of applications in communications, mobile battery powered equipments and industrial systems. Models Ordercode TEN 5-0510 TEN 5-0511 TEN 5-0512 TEN 5-0513 TEN 5-0521 TEN 5-0522 TEN 5-0523 TEN 5-1210 TEN 5-1211 TEN 5-1212 TEN 5-1213 TEN 5-1221 TEN 5-1222 TEN 5-1223 TEN 5-2410 TEN 5-2411 TEN 5-2412 TEN 5-2413 TEN 5-2421 TEN 5-2422 TEN 5-2423 TEN 5-4810 TEN 5-4811 TEN 5-4812 TEN 5-4813 TEN 5-4821 TEN 5-4822 TEN 5-4823 http://www.tracopower.com Input voltage range 4.5 – 7 VDC 9 – 18 VDC 18 – 36 VDC 36 – 75 VDC Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output current max. 1200 mA 1000 mA 500 mA 400 mA ± 500 mA ± 250 mA ± 200 mA 1200 mA 1000 mA 500 mA 400 mA ± 500 mA ± 250 mA ± 200 mA 1200 mA 1000 mA 500 mA 400 mA ± 500 mA ± 250 mA ± 200 mA 1200 mA 1000 mA 500 mA 400 mA ± 500 mA ± 250 mA ± 200 mA Efficiency typ. 75 % 79 % 82 % 82 % 79 % 82 % 82 % 77 % 81 % 84 % 84 % 81 % 84 % 84 % 79 % 83 % 86 % 86 % 83 % 86 % 86 % 79 % 83 % 86 % 86 % 83 % 86 % 86 % Page  of 3 PDF
Документация на серию TEN5 

Дата модификации: 20.09.2006

Размер: 98.1 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DCP020505U (TI)