TEN 6-2415WIN

TRACO
DC-DC модульный преобразователь - Монтаж: на плат, DIP24; P вых: 6 Вт; #: 1; U вх: 9...36 В; Выход: 24 В; Защита: КЗ, перегрузка
развернуть ▼ свернуть ▲
Фотография серии TEN6WIN

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 31.8×20.3×10.2 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 34

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- URB2424ZP-6WR3 (MORNSUN)
 
DIP-24 в линейках 30 шт — — — — — — — — —
A- SKMW06G-24 (MW)
 
1X1INCH в линейках 19 шт
 
 DC-DC Regulated Power Supply Module — — — — — — — —
A- SKE10B-24 (MW)
 
2X1INCH в линейках 10 шт короткого замыкания, перегрузки — — — — — — — — — —
A- URF2424LP-10WR3 (MORNSUN)
 
2X1INCH в линейках 10 шт
 
 — — — — — — — — —
A- THL 10-2415WI (TRACO)
 
— в линейках 4 шт
 
 — — — — — — — — — —
A- AM6TW-2424SZ (AIMTEC)
 
DIP2410 1 шт — — — — — — — — —
A- AM6TW-2424SH30-NZ (AIMTEC)
 
— в линейках 15 шт
 
 — — — — — — — — —
A- SKMW06F-24 (MW)
 
— 1 шт
 
 DC-DC Regulated Power Supply Module — — — — — — — —
A- AM6TW-2424S-RZ (AIMTEC)
 
DIP2410 1 шт
 
 — — — — — — — — —
A- AM10TW-2424S-NZ (AIMTEC)
 
—
 
 — — — — — — — — —
A- URB2424ZP-10WR3 (MORNSUN)
 
—
 
 — — — — — — — — —
A- URH2424P-6WR3 (MORNSUN)
 
DIP2410
 
 — — — — — — — — —
A- URA2424ZP-6WR3 (MORNSUN)
 
— 1 шт — — — — — — —
A- TVN 5-2425WI (TRACO)
 
DIP2410 1 шт короткого замыкания, перегрузки, перенапряжения — — — — — — —
A- AM6TW-2424S-NZ (AIMTEC)
 
DIP2410 1 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 1; U вх: 9..... — — — — — — — — —
A- URF2424P-6WR3 (MORNSUN)
 
DIP2410 1 шт — — — — — — — — —
A- PSD-05-24 (MW)
 
— в коробках 20 шт DC-DC модульный преобразователь - Монтаж: открытый; P вых: 5 Вт; #: 1; U вх: 36...72 В;... короткого замыкания, перегрузки, перенапряжения, перегрева — — — — — — —
A- THD 10-4815WIN (TRACO)
 
DIP2410 1 шт — — — — — — — — — —
A- TEL 10-2415WI (TRACO)
 
— 4 шт
 
 — — — — — — — — — — —
A- THN 10-4815WIR (TRACO)
 
— 3 шт КЗ, перегрузка, перенапряжение — — — — — — — — — — —
A- THN 10-4825WIR (TRACO)
 
— КЗ, перегрузка, перенапряжение — — — — — — — — —
A- THN 10-7215WIR (TRACO)
 
— КЗ, перегрузка, перенапряжение — — — — — — — — — — —
A- THN 10-7225WIR (TRACO)
 
— КЗ, перегрузка, перенапряжение — — — — — — — — —
A- THD 10-2415WIN (TRACO)
 
DIP2410 2 шт
 
 — — — — — — — — — — — —
A- TEL 10-1215 (TRACO)
 
—
 
 — — — — — — — — — — —
A- DKE10B-24 (MW)
 
2X1INCH в линейках 10 шт Преобразователь напряжения DC-DC на плату. 10Вт, стабилизированный, Uвх=18-36В, выход ... короткого замыкания, перегрузки — — — — — — — —
A- TMDC 10-2415 (TRACO)
 
—
 
 — — — — — — — — — — — — —
A- TDN 5-0915WISM (TRACO)
 
SMD5 — — — — — — — — — —
A- TMDC 06-2415 (TRACO)
 
—
 
 — — — — — — — — — — — — —
A- TEL 10-4815 (TRACO)
 
—
 
 — — — — — — — — — — —
A- TEL 10-4815WI (TRACO)
 
— 2 шт
 
 — — — — — — — — — — —
A- TDN 5-2415WISM (TRACO)
 
SMD5 2 шт — — — — — — — — — —
A- TMDC 06-4815 (TRACO)
 
— 1 шт
 
 — — — — — — — — — — — — —
A- TDN 5-4815WI (TRACO)
 
DIP-6 7 шт — — — — — — — — — —

Файлы 4

показать свернуть
DC/DC Converter TEN 6WIN Series, 6 Watt • • • Wide 4:1 input voltage range • Models with 1’500 VDC and 3’000 VDC I/O isolation (functional insulation) • • • • • Input filter meets EN 55022, class A High efficiency Operating temperature range –40°C to +85°C UL 62368-1 IEC 62368-1 The TEN 6WIN series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal filter for EN55022 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Overload protection DIP-24 plastic package Industry standard pinout 3-year product warranty Models Order Code Input Voltage Range TEN 6-2410WIN TEN 6-2411WIN TEN 6-2412WIN TEN 6-2413WIN TEN 6-2415WIN TEN 6-2421WIN TEN 6-2422WIN TEN 6-2423WIN TEN 6-4810WIN TEN 6-4811WIN TEN 6-4812WIN TEN 6-4813WIN TEN 6-4815WIN TEN 6-4821WIN TEN 6-4822WIN TEN 6-4823WIN 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 1'200 mA 1'200 mA 500 mA 400 mA 250 mA 500 mA 250 mA 200 mA 1'200 mA 1'200 mA 500 mA 400 mA 250 mA 500 mA 250 mA 200 mA Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 500 mA 250 mA 200 mA –5 VDC –12 VDC –15 VDC 500 mA 250 mA 200 mA typ. 77 % 80 % 84 % 84 % 84 % 80 % 84 % 84 % 77 % 80 % 84 % 84 % 84 % 80 % 84 % 84 % Options Suffix -HI - Models with high isolation (3000 VDC) www.tracopower.com January 12, 2022 Page 1 / 4 PDF
Документация на TEN 6-2411WIN 

TEN 6WIN Datasheet 6 Watt DC/DC converter, industrial, 4:1 input, encapsulated, DIP-24

Дата модификации: 12.01.2022

Размер: 887.5 Кб

4 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 6WIN Series, 6 Watt CndBing pe Scheme IEC 60950-1 Features ◆ Wide 4:1 input voltage range ◆ High efficiency ◆ Operating temperature range UL 60950-1 –40°C to +85°C ◆ No minimum load required ◆ Models with 1’500 VDC and 3’000 VDC I/O isolation (functional insulation) ◆ ◆ ◆ ◆ ◆ Input filter meets EN 55022, class A Overload protection DIP-24 plastic package Industry standard pinout 3-year product warranty The TEN-6WIN series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal filter for EN55022 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Models Order code Input voltage Output voltage range Output current Efficiency typ. max. 1‘500 VDC isolation 3‘000 VDC isolation TEN 6-2410WIN TEN 6-2410WIN-HI 3.3 VDC 1200 mA 77 % TEN 6-2411WIN TEN 6-2411WIN-HI 5 VDC 1200 mA 80 % TEN 6-2412WIN TEN 6-2412WIN-HI 12 VDC 500 mA 84 % TEN 6-2413WIN TEN 6-2413WIN-HI 9 – 36 VDC 15 VDC 400 mA 84 % TEN 6-2415WIN TEN 6-2415WIN-HI (24 VDC nominal) 24 VDC 250 mA 84 % TEN 6-2421WIN TEN 6-2421WIN-HI ±5 VDC ±500 mA 80 % TEN 6-2422WIN TEN 6-2422WIN-HI ±12 VDC ±250 mA 84 % TEN 6-2423WIN TEN 6-2423WIN-HI ±15 VDC ±200 mA 84 % TEN 6-4810WIN TEN 6-4810WIN-HI 3.3 VDC 1200 mA 77 % TEN 6-4811WIN TEN 6-4811WIN-HI 5 VDC 1200 mA 80 % TEN 6-4812WIN TEN 6-4812WIN-HI 12 VDC 500 mA 84 % TEN 6-4813WIN TEN 6-4813WIN-HI 18 – 75 VDC 15 VDC 400 mA 84 % TEN 6-4815WIN TEN 6-4815WIN-HI (48 VDC nominal) 24 VDC 250 mA 84 % TEN 6-4821WIN TEN 6-4821WIN-HI ± 5 VDC ±500 mA 80 % TEN 6-4822WIN TEN 6-4822WIN-HI ±12 VDC ±250 mA 84 % TEN 6-4823WIN TEN 6-4823WIN-HI ±15 VDC ±200 mA 84 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию TEN6WIN 

datasheet

Дата модификации: 27.09.2013

Размер: 246.9 Кб

3 стр.

DC/DC Converters TEN 6WIN Series, 6 Watt C Bending p Scheme IEC 60950-1 Features ◆ Wide 4:1 input voltage range ◆ High efficiency ◆ Operating temperature range UL 60950-1 –40°C to +85°C ◆ No minimum load required ◆ Models with 1’500 VDC and 3’000 VDC I/O isolation (functional insulation) ◆ ◆ ◆ ◆ ◆ Input filter meets EN 55022, class A Overload protection DIP-24 plastic package Industry standard pinout 3-year product warranty The TEN-6WIN series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal filter for EN55022 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Models Order code Input voltage Output voltage Output current Efficiency typ. 1‘500 VDC isolation 3‘000 VDC isolation TEN 6-2410WIN TEN 6-2410WIN-HI 3.3 VDC 1200 mA 77 % TEN 6-2411WIN TEN 6-2411WIN-HI 5 VDC 1200 mA 80 % TEN 6-2412WIN TEN 6-2412WIN-HI 12 VDC 500 mA 84 % TEN 6-2413WIN TEN 6-2413WIN-HI 9 – 36 VDC 15 VDC 400 mA 84 % TEN 6-2415WIN TEN 6-2415WIN-HI (24 VDC nominal) 24 VDC 250 mA 84 % TEN 6-2421WIN TEN 6-2421WIN-HI ±5 VDC ±500 mA 80 % TEN 6-2422WIN TEN 6-2422WIN-HI ±12 VDC ±250 mA 84 % TEN 6-2423WIN TEN 6-2423WIN-HI ±15 VDC ±200 mA 84 % TEN 6-4810WIN TEN 6-4810WIN-HI 3.3 VDC 1200 mA 77 % TEN 6-4811WIN TEN 6-4811WIN-HI 5 VDC 1200 mA 80 % TEN 6-4812WIN TEN 6-4812WIN-HI 12 VDC 500 mA 84 % TEN 6-4813WIN TEN 6-4813WIN-HI 18 – 75 VDC 15 VDC 400 mA 84 % TEN 6-4815WIN TEN 6-4815WIN-HI (48 VDC nominal) 24 VDC 250 mA 84 % TEN 6-4821WIN TEN 6-4821WIN-HI ± 5 VDC ±500 mA 80 % TEN 6-4822WIN TEN 6-4822WIN-HI ±12 VDC ±250 mA 84 % TEN 6-4823WIN TEN 6-4823WIN-HI ±15 VDC ±200 mA 84 % http://www.tracopower.com range max. Page 1 of 3 PDF
Документация на серию TEN6WIN 

Дата модификации: 23.07.2012

Размер: 167.4 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DCH010505SN7 (TI)