TEN 8-2423WI

DC/DC конвертор: PCB DIP24; 8 Вт; Выходов 2: 15В / 0.265А, -15В / 0.265А; Вход: 9...36 [24] В; -40...85 °C
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит короткого замыкания, перегрузки
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 32×20.3×10.2 мм
Рабочая температура
Примечания Защита от КЗ: продолжительная с автовосстановлением
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
P= RDDW08F-15 (MW) 100 шт КЗ, перегрузка, перенапряжение, от пониженного входного напряжения
F~ URA2415ZP-10WR3 (MORNSUN) 1 шт
 
A- VRA2415ZP-10WR3 (MORNSUN) в линейках 200 шт
 
A- TEN 8-1223 (TRACO) DIP2410 в линейках 10 шт короткого замыкания, перегрузки Защита от КЗ: продолжительная с автовосстановлением
A- TEN 8-2423 (TRACO) DIP2410 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 8 Вт; #: 2; U вх: 18.... короткого замыкания, перегрузки Защита от КЗ: продолжительная с автовосстановлением
A- DCW08A-15 (MW) DIP2410 в линейках 15 шт DC-DC модульный преобразователь - ; Траб: -40...71 °C короткого замыкания, перегрузки
A- DCW08B-15 (MW) DIP2410 в линейках 5 шт Преобразователь напряжения DC-DC на плату. 8Вт, стабилизированный, Uвх=18-36В,  выход ±... короткого замыкания, перегрузки
A- DCW08C-15 (MW) DIP2410 в линейках 5 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 8 Вт; #: 2; U вх: 36.... короткого замыкания, перегрузки
A- DCW12A-15 (MW) DIP2410
 
короткого замыкания, перегрузки
A- DCW12B-15 (MW) DIP2410
 
короткого замыкания, перегрузки
A- NSD10-12D15 (MW) 2X1INCH 1 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 10 Вт; #: 2; U вх:... перегрузки, перенапряжения, перегрева
A- DCW12C-15 (MW) DIP2410
 
короткого замыкания, перегрузки
A- DKE10B-15 (MW) 2X1INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 10 Вт; #: 2; U вх:... короткого замыкания, перегрузки
A- NSD10-48D15 (MW) 2X1INCH 1 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 10 Вт; #: 2; U вх:... перегрузки, перенапряжения, перегрева
A- DKE10C-15 (MW) 2X1INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 10 Вт; #: 2; U вх:... короткого замыкания, перегрузки
A- DKM10A-15 (MW) короткого замыкания, перегрузки, перенапряжения, пониженного входного напряжения
A- DKM10B-15 (MW) 2 шт короткого замыкания, перегрузки, перенапряжения, пониженного входного напряжения
A- DKM10C-15 (MW) короткого замыкания, перегрузки, перенапряжения, пониженного входного напряжения
A- DKM10E-15 (MW) короткого замыкания, перегрузки, перенапряжения, пониженного входного напряжения
A- DPB09A-15 (MW) 10 шт
 
A- DPB09B-15 (MW) 3 шт
 
A- DPB09C-15 (MW)
 
A- URA4815YMD-10WR3 (MORNSUN)
A- URA4815YMD-10WR3A2S (MORNSUN)
A- URA4815YMD-10WR3A4S (MORNSUN)

Файлы 4

показать свернуть
DC/DC Converter TEN 8WI Series, 8 Watt • Ultra wide 4:1 input range up to 160 VDC • Certified for Railway applications (EN 50155) • Operating temperature range -40°C to + 85°C • • • • Input under voltage lockout I/O isolation 1500 VDC Input filter to meet EN 55022 class A Remote On/Off UL 62368-1 IEC 62368-1 The TEN 8WI series is a family of high performance 8 Watt dc/dc converter modules featuring ultra wide 4:1 input voltage ranges in a DIP-24 package with industry- standard footprint. Input voltages up to 160 VDC, excellent EMC characteristics and EN 50155 approval make this product the best choice for many demanding applications in railroad and transportation systems. Further standard features include remote On/Off, over voltage protection, under voltage lockout and short circuit protection. Typical applications for these converters are also in wireless networks, telecom/datacom, industry control systems and measurement equipment. Models Order Code Input Voltage Range TEN 8-2410WI TEN 8-2411WI TEN 8-2412WI TEN 8-2413WI TEN 8-2421WI TEN 8-2422WI TEN 8-2423WI TEN 8-4810WI TEN 8-4811WI TEN 8-4812WI TEN 8-4813WI TEN 8-4821WI TEN 8-4822WI TEN 8-4823WI TEN 8-7210WI TEN 8-7211WI TEN 8-7212WI TEN 8-7213WI TEN 8-7221WI TEN 8-7222WI TEN 8-7223WI www.tracopower.com 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) 43 - 160 VDC (110 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 2'400 mA 1'600 mA 666 mA 533 mA 800 mA 333 mA 267 mA 2'400 mA 1'600 mA 666 mA 533 mA 800 mA 333 mA 267 mA 2'400 mA 1'600 mA 666 mA 533 mA 800 mA 333 mA 267 mA October 13, 2021 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 800 mA 333 mA 267 mA –5 VDC –12 VDC –15 VDC 800 mA 333 mA 267 mA –5 VDC –12 VDC –15 VDC 800 mA 333 mA 267 mA typ. 85 % 87 % 86 % 86 % 84 % 86 % 86 % 85 % 87 % 87 % 88 % 84 % 87 % 87 % 84 % 85 % 86 % 86 % 82 % 85 % 85 % Page 1 / 5 PDF
Документация на TEN 8-2410WI 

TEN 8WI Datasheet 8 Watt DC/DC converter, railway, 4:1 input incl. 110 VDC nominal, high temperature range, encapsulated, DIP-24 metal package

Дата модификации: 13.10.2021

Размер: 923.4 Кб

5 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 8WI Series, 8 Watt Features ◆ DIP-24 metal package ◆ Ultra wide 4:1 input voltage range 9–36, 18–75, 43–160 VDC ◆ EN 50155 approval for railway applications ◆ Thermal shock and vibration resistant according EN 61373 ◆ High efficiency up to 88 % ◆ No minimum load required ◆ Operating temperature range –40°C to +85°C ◆ Remote On/Off ◆ Under voltage lock-out circuit ◆ Shielded metal case with insulated base plate ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TEN 8WI series is a family of high performance 8 Watt dc/dc converter modules featuring ultra wide 4:1 input voltage ranges in a DIP-24 package with industry-standard footprint. Input voltages up to 160 VDC, excellent EMC characteristics and EN 50155 approval make this product the best choice for many demanding applications in railroad and transportation systems. Further standard features include remote On/Off, over voltage protection, under voltage lockout and short circuit protection. Typical applications for these converters are also in wireless networks, telecom/datacom, industry control systems and measurement equipments. Models Order code TEN 8-2410WI TEN 8-2411WI TEN 8-2412WI TEN 8-2413WI TEN 8-2421WI TEN 8-2422WI TEN 8-2423WI TEN 8-4810WI TEN 8-4811WI TEN 8-4812WI TEN 8-4813WI TEN 8-4821WI TEN 8-4822WI TEN 8-4823WI TEN 8-7210WI TEN 8-7211WI TEN 8-7212WI TEN 8-7213WI TEN 8-7221WI TEN 8-7222WI TEN 8-7223WI http://www.tracopower.com Input voltage range 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) 43 – 160 VDC (110 VDC nominal) Output voltage Output current max. Efficiency typ. 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 2’400 mA 1’600 mA 666 mA 533 mA ±800 mA ±333 mA ±267 mA 2’400 mA 1’600 mA 666 mA 533 mA ±800 mA ±333 mA ±267 mA 2’400 mA 1’600 mA 666 mA 533 mA ±800 mA ±333 mA ±267 mA 85 % 87 % 86 % 86 % 84 % 86 % 86 % 85 % 87 % 87 % 88 % 84 % 87 % 87 % 84 % 85 % 86 % 86 % 82 % 85 % 85 % Page 1 of 4 PDF
Документация на серию TEN8WI 

Дата модификации: 19.10.2012

Размер: 174 Кб

4 стр.

DC/DC Converters TEN 8WI Series, 8 Watt RoHS compliant Features ◆ High Power Density in DIP-24 Metal Package ◆ Ultra wide 4:1 Input Voltage Range ◆ High Efficiency up to 88% ◆ Operating Temperature Range: -40°C to +85°C ◆ Remote On/Off ◆ Under Voltage Lockout ◆ Shielded Metal Case with insulated Base plate ◆ Lead free Design, RoHS compliant ◆ 3 Year Product Warranty The TEN 8WI series is a family of high performance 8W DC/DC converter modules featuring ultra wide 4:1 input voltage ranges in a DIP-24 package with industry-standard footprint. A very high efficiency allows an operating temperature range of –40°C to +85°C. Full SMD-design with exclusive use of ceramic capacitors guarantees a high reliability and long product lifetime. Further standard features include remote On/Off, over voltage protection, under voltage lockout and short circuit protection. Typical applications for these converters are battery operated equipment, instrumentation, communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. Models Order code Output voltage Output current max. Efficiency typ. TEN 8-2410WI 3.3 VDC 2’000 mA 85 % TEN 8-2411WI 5 VDC 1’500 mA 87 % 12 VDC 665 mA 86 % 15 VDC 535 mA 86 % ± 5 VDC ± 800 mA 84 % TEN 8-2422WI ±12 VDC ± 335 mA 86 % TEN 8-2423WI ±15 VDC ± 265 mA 86 % TEN 8-4810WI 3.3 VDC 2’000 mA 85 % TEN 8-4811WI 5 VDC 1’500 mA 87 % 12 VDC 665 mA 87 % 15 VDC 535 mA 88 % ± 5 VDC ± 800 mA 84 % TEN 8-4822WI ±12 VDC ± 335 mA 86 % TEN 8-4823WI ±15 VDC ± 265 mA 87 % TEN 8-2412WI TEN 8-2413WI TEN 8-2421WI TEN 8-4812WI TEN 8-4813WI TEN 8-4821WI http://www.tracopower.com Input voltage range 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) Page  of 3 PDF
Документация на серию TEN8WI 

Дата модификации: 29.03.2007

Размер: 166 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.