TEP 160-2412

TRACO
DC/DC Converter TEP 160 Series, 160 Watt • • Compact metal package • • • • • • • • Very high efficiency up to 93% Wide 2:1 input voltage ranges 16.5–36, 33–75 VDC No minimum load Soft start Adjustable output voltage +10/-20% Sense line Remote On/Off input UL 62368-1 IEC 62368-1 Reverse input voltage protection Over temperature protection The TEP 160 Series is a family of isolated high p...
развернуть ▼ свернуть ▲
Фотография серии TEP160

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит короткого замыкания, перенапряжения
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Размер 61×57.9×12.7 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- TEP 160-4812 (TRACO)
 
— 1 шт дистанционные вкл./выкл., регулировка выхода короткого замыкания, перенапряжения — — — — — — — — —
A- CQS48120-14 (COSEL)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 168W, Hybrid — — — — — — — — — — —
A- EBVW020A0B9641-HZ (ABB)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 240W, Hybrid OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE; THERMAL — — — — — — — — — — —
A- CHS3002412 (COSEL)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 200.4W, Hybrid — — — — — — — — — — — — — —
A- CBS2002412 (COSEL)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 200.4W, Hybrid — — — — — — — — — — — — —
A- QSB15024S12 (XP POWER)
 
— 1 шт
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid — — — — — — — — — — — — — —
A- VI-2W1-CV (VIC)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid — — — — — — — — — — — —
A- VI-2W1-EV-B1 (VIC)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid — — — — — — — — — — — — —
A- VI-2W1-IV (VIC)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid — — — — — — — — — — — — —
A- DDA250N-S1PX-12-001 (TDK)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 250W, Hybrid — — — — — — — — — — — —
A- DDA325N-D2PN-1212-001 (TDK)
 
—
 
 — DC-DC Regulated Power Supply Module, 2 Output, 250W, Hybrid — — — — — — — — — — — —
A- CQB150W-24S12 (CINCON)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE; THERMAL — — — — — — — — — — —
A- CQB150W-48S12 (CINCON)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE; THERMAL — — — — — — — — — — —
A- V48B12C250BL (VIC)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 250W, Hybrid — — — — — — — — — — — —
A- V48B12H250BN (VIC)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 250W, Hybrid — — — — — — — — — — — —
A- V48B12T250BG (VIC)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 250W, Hybrid — — — — — — — — — — — —
A- V48C12C150BL (VIC)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid — — — — — — — — — — — —
A- V48C12T150BL (VIC)
 
— 1 шт
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid — — — — — — — — — — — —
A- CHB150-48S12 (CINCON)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid — — — — — — — — — — —
A- CHB150W-24S12 (CINCON)
 
DIP2410
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid — — — — — — — — — — — — —
A- CHB150W-24S12N (CINCON)
 
DIP24(stand)
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid — — — — — — — — — — — — —
A- JCJ0824S12 (XP POWER)
 
CASE SCW/DCW08
 
 — DC-DC Regulated Power Supply Module, 1 Output, 145.44W, Hybrid — — — — — — — — — — — — —
A- JCJ1012S12 (XP POWER)
 
CASE SCW/DCW08
 
 — DC-DC Regulated Power Supply Module, 1 Output, 145.44W, Hybrid — — — — — — — — — — — — —
A- CHB150W-48S12 (CINCON)
 
DIP24(stand)
 
 — DC-DC Regulated Power Supply Module, 1 Output, 150W, Hybrid — — — — — — — — — — — — —
A- JCJ1024S12 (XP POWER)
 
—
 
 — DC-DC Regulated Power Supply Module, 1 Output, 145.44W, Hybrid — — — — — — — — — — — — —

Файлы 4

показать свернуть
DC/DC Converter TEP 160 Series, 160 Watt • • Compact metal package • • • • • • • • Very high efficiency up to 93% Wide 2:1 input voltage ranges 16.5–36, 33–75 VDC No minimum load Soft start Adjustable output voltage +10/-20% Sense line Remote On/Off input UL 62368-1 IEC 62368-1 Reverse input voltage protection Over temperature protection The TEP 160 Series is a family of isolated high performance DC/DC converter modules with wide 2:1 input voltage ranges which come in a rugged, sealed industry standard half brick package. A very high efficiency allows full power operation without forced air cooling at 25°C This temperature can be increased to 40°C with optional mounted heatsink or up to 60°C when mounted on an iron base plate. The very wide input voltage range and reverse input voltage protection make these converters interesting solution for battery operated systems. Typical applications are in telecom/datacom, industry control and railway systems for on board power distribution. These series is available in many optional designs on demand --> see options. Models Order Code Input Voltage Range Output Voltage nom. Output Current max. Efficiency typ. TEP 160-2412 12 VDC 13'000 mA 92 % TEP 160-2413 15 VDC 10'000 mA 92 % 16.5 - 36 VDC (24 VDC nom.) 24 VDC 6'500 mA 93 % TEP 160-2416 28 VDC 5'500 mA 93 % TEP 160-2418 48 VDC 3'300 mA 92 % TEP 160-4812 12 VDC 16'000 mA 92 % TEP 160-4813 15 VDC 13'000 mA 93 % 24 VDC 8'000 mA 92 % 28 VDC 7'000 mA 92 % TEP 160-4818 48 VDC 4'000 mA 92 % TEP 160-48153 53 VDC 3'700 mA 92 % www.tracopower.com August 5, 2021 TEP 160-2415 TEP 160-4815 TEP 160-4816 33 - 75 VDC (48 VDC nom.) Page 1 / 5 PDF
Документация на TEP 160-2412 

TEP 160 Datasheet 160 Watt DC/DC module, industrial, 2:1 input, PCB- Chassis or DIN-Rail mount, opt. EMI Filter, encapsulated, Half-Brick package

Дата модификации: 05.08.2021

Размер: 1.25 Мб

5 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEP 160 Series, 150 – 196 Watt Features ◆ Compact metal package ◆ Wide 2:1 input voltage ranges 16.5–36, 33–75 VDC ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Very high efficiency up to 93% No minimum load Soft start Ajustable output voltage +10/-20% Sense line (Models pictured with optional heatsink) Remote On/Off input Reverse input voltage protection Over temperature protection Optional Heatsink 3-year product warranty The TEP 160 Series is a family of isolated high performance dc-dc converter modules with wide 2:1 input voltage ranges which come in a rugged, sealed industry standard half brick package. A very high efficiency allows full power operation without forced air cooling at 25°C This temperature can be increased to 40°C with optional mounted heatsink or up to 60°C when mounted on an iron base plate. The very wide input voltage range and reverse input voltage protection make these converters interesting solution for battery operated systems. Typical applications are in telecom/datacom, industry control and railway systems for on board power distribution. These series is available in many optional designs on demand --> see options. Standard Models Order code Input voltage TEP 160–2412 TEP 160–2413 TEP 160–2415 TEP 160–2416 TEP 160–2418 TEP 160–4812 TEP 160–4813 TEP 160–4815 TEP 160–4816 TEP 160–4818 TEP 160–48153 16.5 – 36 VDC (24 VDC nominal) 33 – 75 VDC (48 VDC nominal) Output voltage 12 VDC 15 VDC 24 VDC 28 VDC 48 VDC 12 VDC 15 VDC 24 VDC 28 VDC 48 VDC 53 VDC Output current max. 13 A 10 A 6.5 A 5.5 A 3.3 A 16 A 13 A 8A 7A 4A 3.7 A Efficiency typ. 92 % 92 % 93 % 93 % 92 % 92 % 93 % 92 % 92 % 92 % 92 % Options TEP-HS1 TEP-MK1 TCK-xxx on demand Heat-sink for standard version (incl. mounting screws and thermal pad) Din-rail mounting kit for chassis mount models (incl. mounting screws) Common mode chokes for filter proposals to meet EN55022 class A/B --> see application note Models with 3.3 VDC/~ 40 A or 5.0 VDC/~ 30 A output Negative (passive = Off) Remote On/Off function (standard is passive = On) Sync pin to synchronize switching frequency of up to 3 units (EMC reason) http://www.tracopower.com Page 1 of 4 PDF
Документация на серию TEP160 

Дата модификации: 14.02.2014

Размер: 332.3 Кб

4 стр.

DC/DC Converters TEP 160 Series, 150 – 196 Watt g din n pe Features ◆ Compact metal package ◆ Wide 2:1 input voltage ranges 16.5–36, 33–75 VDC ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Very high efficiency up to 93% No minimum load Soft start Ajustable output voltage +10/-20% Sense line (Models pictured with optional heatsink) Remote On/Off input Reverse input voltage protection Over temperature protection Optional Heatsink Optional as chassis mount models with screw terminal block and EMI Filter ◆ 3-year product warranty The TEP 160 Series is a family of isolated high performance dc-dc converter modules with wide 2:1 input voltage ranges which come in a rugged, sealed industry standard half brick package. A very high efficiency allows full power operation without forced air cooling at 25°C This temperature can be increased to 40°C with optional mounted heatsink or up to 60°C when mounted on an iron base plate. The very wide input voltage range and reverse input voltage protection make these converters interesting solution for battery operated systems. Typical applications are in telecom/datacom, industry control and railway systems for on board power distribution. These series is available in many optional designs on demand --> see options. Standard Models Order code Input voltage TEP 160–2412 TEP 160–2413 TEP 160–2415 TEP 160–2416 TEP 160–2418 TEP 160–4812 TEP 160–4813 TEP 160–4815 TEP 160–4816 TEP 160–4818 TEP 160–48153 16.5 – 36 VDC (24 VDC nominal) 33 – 75 VDC (48 VDC nominal) Output voltage 12 VDC 15 VDC 24 VDC 28 VDC 48 VDC 12 VDC 15 VDC 24 VDC 28 VDC 48 VDC 53 VDC Output current max. 13 A 10 A 6.5 A 5.5 A 3.3 A 16 A 13 A 8A 7A 4A 3.7 A Efficiency typ. 92 % 92 % 93 % 93 % 92 % 92 % 93 % 92 % 92 % 92 % 92 % Options TEP-HS1 TEP-MK1 TCK-xxx on demand Heat-sink for standard version (incl. mounting screws and thermal pad) Din-rail mounting kit for chassis mount models (incl. mounting screws) Common mode chokes for filter proposals to meet EN55022 class A/B --> see application note Models with 3.3 VDC/~ 40 A or 5.0 VDC/~ 30 A output Chassis mount models with screw terminal block Chassis mount models with screw terminal block and input filter to meet EN 555022 class A Negative (passive = Off) Remote On/Off function (standard is passive = On) Sync pin to synchronize switching frequency of up to 3 units (EMC reason) http://www.tracopower.com Page 1 of 5 PDF
Документация на серию TEP160 

Дата модификации: 23.03.2012

Размер: 401.6 Кб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DKA30C-15 (MW)