TEP 60-7212UIR

TRACO
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing...
развернуть ▼ свернуть ▲
Внешний вид серии TEP 60UIR

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит КЗ, перегрев, от пониженного входного напряжения
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Напряжение изоляции вход-выход
Размер 57.9×36.8×12.7 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converter TEP 60UIR Series, 60 Watt • Ultra-wide 12:1 input voltage range 9–75, 14–160 VDC • Compact 2.3”x1.45”x0.5” standard package (quarter brick) • • Bus pin to easily extend hold-up time • Qualification for fire behavior according to EN 45545-2 • Operating temperature range –40°C to +75°C EN 50155 and EN 61373 approval for railway applications • • • I/O-isolation 3‘000 VAC • 3 year product warranty High efficiency up to 91% Adjustable output voltage, Remote On/Off and adjustable under voltage lockout UL 62368-1 IEC 62368-1 The TEP 60UIR is a series of high performance 60 Watt railway DC/DC converters with ultra wide 12:1 input voltage range featuring a compact ¼ brick (2.3”x1.45”x0.5”) metal package. The ultra wide input allows the converter to act as an all-in-one solution if different voltage ranges have to be covered in the same application, resolving the issue of having multiple different converters installed. An internal circuit implemented in these modules helps to extend the hold-up time with ease as it eliminates the need of expensive high voltage capacitors to cover the full input range. With only a 25V capacitor (independent of the input voltage) the whole input range can be covered effectively reducing cost, size an inrush current. All models are approved for railway applications according to EN 50155, EN 61373, EN 45545-2 and offer standard features such as high efficiency up to 91%, an operating temperature range of -40° to +75°C and an I/O-isolation voltage of 3’000 VAC. An adjustable under voltage lockout function, remote on/off and adjustable outputs round out the features and ensure that these converter modules fit in any application setup. Models Order Code Input Voltage Range TEP 60-3611UIR TEP 60-3612UIR 9 - 75 VDC (36 VDC nom.) Output Voltage nom. Output Current max. Efficiency typ. 5 VDC 12'000 mA 89 % 12 VDC 5'000 mA 89 % 15 VDC 4'000 mA 90 % TEP 60-3615UIR 24 VDC 2'500 mA 90 % TEP 60-3618UIR 48 VDC 1'250 mA 91 % TEP 60-7211UIR 5 VDC 12'000 mA 89 % TEP 60-7212UIR 12 VDC 5'000 mA 89 % TEP 60-3613UIR 14 - 160 VDC (110 VDC nom.) 15 VDC 4'000 mA 89 % TEP 60-7215UIR 24 VDC 2'500 mA 90 % TEP 60-7218UIR 48 VDC 1'250 mA 90 % TEP 60-7213UIR Options TEP-HS2 - Optional Heat Sink: www.tracopower.com/products/tep-hs2.pdf TEP-HS4 - Optional Heat Sink: www.tracopower.com/products/tep-hs4.pdf - Remote On/Off function with inverse logic on demand (backorder with MOQ - Optional Heat Sink with large profile: www.tracopower.com/products/tep-hs3.pdf non stocking item) - Optional Heat Sink with large profile: www.tracopower.com/products/tep-hs5.pdf www.tracopower.com January 20, 2021 Page 1 / 4 PDF
Документация на серию TEP 60UIR 

TEP 60UIR Datasheet 60 Watt DC/DC converter, railway, 12:1 input, 3000VAC isolation, PCB-Mount, quarter-brick package

Дата модификации: 20.01.2021

Размер: 965.1 Кб

4 стр.

    Публикации 1

    показать свернуть
    25 февраля 2021
    новость

    TEP 40/60UIR – новый тип DC/DC с ультрашироким входом от TRACO для подвижного состава

    Компания TRACO разработала две серии компактных DC/DC–преобразователей мощностью 40 и 60 Вт с ультрашироким входом  для применения на железнодорожном транспорте – TEP 40UIR и TEP 60UIR. Ширина Uвх. преобразователей составляет 12:1... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DCH010505SN7 (TI)