TEP 75-4811WI-CMF

Модуль питания
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Напряжение изоляции вход-выход
Размер 57.9×61×12.7 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 33

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- MHB100-48S05 (MW) DC-DC модульный преобразователь - короткого замыкания, перегрузки, перенапряжения, перегрева
A- TEP 100-4811 (TRACO) 1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 100 Вт; #: 1; U вх: 36...75 ...
A- TEN 60-2411WIN (TRACO) 2X1INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 1x2 inch; P вых: 60 Вт; #: 1; U вх:... подстройка выхода, дистанционное управление Защита от КЗ: продолжительная с автовосстановлением
A- TEN 60-2411 (TRACO) 2X2INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 60 Вт; #: 1; U вх:... Защита от КЗ: продолжительная с автовосстановлением
A- VCB4805SBO-100WR3 (MORNSUN) 10 шт КЗ, перегрузка, от пониженного входного напряжения
A- VCB4805EBO-100WR3 (MORNSUN) 3 шт КЗ, перегрузка, от пониженного входного напряжения
A- SD-100B-5 (MW) 1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 100 Вт; #: 1; U вх: 19...36 ... короткого замыкания, перегрузки, перенапряжения
A- DDR-60G-5 (MW) в коробках 60 шт КЗ, переполюсовки, пониженного входного напряжения
A- TEP 100-2411-CMF (TRACO) 1 шт
A- RP75H-4805SRW/P (RECOM)
 
A- URF4848QB-100WFR3 (MORNSUN)
 
A- URF4824QB-100WFR3 (MORNSUN)
 
A- URF4815QB-100WFR3 (MORNSUN)
 
A- URF4812QB-100WFR3 (MORNSUN)
 
A- URF4805QB-75WFR3 (MORNSUN)
 
A- URF4805QB-100WFR3 (MORNSUN)
 
A- RSD-100C-5 (MW) 1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 100 Вт; #: 1; U вх: 33.6...6... короткого замыкания, перегрузки, перенапряжения, переполюсовки
A- RSDW60H-05 (MW) КЗ, перегрузка, перенапряжение, от пониженного входного напряжения
A- RSD-60G-5 (MW) 1 шт КЗ, перегрузка, перенапряжение, обратной полярности
A- SD-100D-5 (MW) 1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 100 Вт; #: 1; U вх: 72...144... короткого замыкания, перегрузки, перенапряжения
A- SD-100C-5 (MW) 1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 100 Вт; #: 1; U вх: 36...72 ... короткого замыкания, перегрузки, перенапряжения
A- NID100-5 (MW) 1 шт
 
A- MHB75-48S05 (MW) DC-DC модульный преобразователь - короткого замыкания, перегрузки, перенапряжения, перегрева
A- MHB75-24S05 (MW) 1 шт DC-DC модульный преобразователь - Монтаж: на плату; P вых: 75 Вт; #: 1; U вх: 18...36 В... короткого замыкания, перегрузки, перенапряжения
A- RSD-100D-5 (MW) 1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 100 Вт; #: 1; U вх: 67.2...1... короткого замыкания, перегрузки, перенапряжения, переполюсовки
A- MHB100-24S05 (MW) 1 шт DC-DC модульный преобразователь - Примечания: DC-DC, 100Вт, вход 18…36В, выход 5В/20А, ... короткого замыкания, перегрузки, перенапряжения, перегрева DC-DC, 100Вт, вход 18…36В, выход 5В/20А, рег.выхода ±10% Uном, изоляция 1500В DC, в корпусе на печатную плату 57.9х61x12.7мм, -40…+100°С, дист вкл/выкл
A- RSDW60G-05 (MW) КЗ, перегрузка, перенапряжение, от пониженного входного напряжения
A- RSDW60F-05 (MW) 2 шт КЗ, перегрузка, перенапряжение, от пониженного входного напряжения
A- SKA60C-05 (MW) 2X2INCH короткого замыкания, перегрузки
A- SKA60B-05 (MW) 2X2INCH в линейках 5 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 60 Вт; #: 1; U вх:... короткого замыкания, перегрузки
A- RSD-60L-5 (MW) 1 шт КЗ, перегрузка, перенапряжение, обратной полярности
A- RSD-60H-5 (MW) в коробках 48 шт КЗ, перегрузка, перенапряжение, обратной полярности
A- URF2405QB-100WFR3 (MORNSUN) 5 шт КЗ, перегрев, перегрузка, перенапряжение, от пониженного входного напряжения

Файлы 3

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEP 75WI Series, 75 Watt Features ◆ Rugged, compact metal case ◆ Screw terminal adaptor available UL 60950-1 for easy connection ◆ EN 50155 approval for railway applications ◆ Optional DIN-rail mounting kit ◆ Ultra wide 4:1 input voltage range u Full load operation up to 60°C with convection cooling ◆ ◆ ◆ ◆ Undervoltage lockout Reverse input voltage protection (Models pictured with chassis mount adaptor / optional heatsink) Input protection filter 3-year product warranty The TEP-75WI Series is a family of isolated high performance DC/DC converter modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed metal case. These converters are suitable for a wide range of applications, but the product is designed particularly also for industrial applications where often no PCB mounting is possible but the module has to be mounted on a chassis. Four threaded M3 inserts in the module makes chassis mount or attachment of a heatsink for optimal thermal management very simple. For easy connection there is also an unique adaptor available with screw terminals. A very high efficiency allows an operating temperature up to +60°C with natural convection cooling without power derating. Further features include output voltage trimming, Remote On/Off and under voltage lockout. The very wide input voltage range and reverse input voltage protection make these converters also an interesting solution for battery operated systems. Models Order code* TEP 75-2411WI TEP 75-2412WI TEP 75-2413WI TEP 75-2415WI TEP 75-2416WI TEP 75-2418WI TEP 75-4811WI TEP 75-4812WI TEP 75-4813WI TEP 75-4815WI TEP 75-4816WI TEP 75-4818WI TEP 75-7211WI TEP 75-7212WI TEP 75-7213WI TEP 75-7215WI TEP 75-7216WI TEP 75-7218WI on demand Input voltage 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) 43 – 160 VDC (72 VDC nominal) Output voltage 5.0 VDC 12 VDC 15 VDC 24 VDC 28 VDC 48 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC 28 VDC 48 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC 28 VDC 48 VDC Output current max. 15.0 A 6.3 A 5.0 A 3.2 A 2.7 A 1.6 A 15 A 6.3 A 5.0 A 3.2 A 2.7 A 1.6 A 15 A 6.3 A 5.0 A 3.2 A 2.7 A 1.6 A Efficiency typ. 88 % 88 % 88 % 87 % 87 % 88 % 90 % 90 % 89 % 88 % 88 % 87 % 91 % 91 % 91 % 90 % 90 % 90 % Models with 3.3 VDC /~ 20 A Negative (passive = Off) Remote On/Off function (standard is passive = On) http://www.tracopower.com Page 1 of 6 PDF
Документация на серию TEP75WI 

datasheet

Дата модификации: 11.10.2013

Размер: 1.06 Мб

6 стр.

DC/DC Converters TEP 75WI Series, 75 Watt Features ◆ Rugged, compact metal case ◆ Screw terminal adaptor available UL 60950-1 for easy connection ◆ Optional DIN-rail mounting kit ◆ Ultra wide 4:1 input voltage range u Full load operation up to 60°C with convection cooling ◆ ◆ ◆ ◆ Undervoltage lockout Reverse input voltage protection Input protection filter (Models pictured with chassis mount adaptor / optional heatsink) 3-year product warranty The TEP-75WI Series is a family of isolated high performance DC/DC converter modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed metal case. These converters are suitable for a wide range of applications, but the product is designed particularly also for industrial applications where often no PCB mounting is possible but the module has to be mounted on a chassis. Four threaded M3 inserts in the module makes chassis mount or attachment of a heatsink for optimal thermal management very simple. For easy connection there is also an unique adaptor available with screw terminals. A very high efficiency allows an operating temperature up to +60°C with natural convection cooling without power derating. Further features include output voltage trimming, Remote On/Off and under voltage lockout. The very wide input voltage range and reverse input voltage protection make these converters also an interesting solution for battery operated systems. Models Order code* Input voltage TEP 75-2411WI TEP 75-2412WI Output voltage Output current max. Efficiency typ. 5.0 VDC 15.0 A 88 % 12 VDC 6.3 A 88 % TEP 75-2413WI 9 – 36 VDC 15 VDC 5.0 A 88 % TEP 75-2415WI (24 VDC nominal) 24 VDC 3.2 A 87 % 28 VDC 2.7 A 87 % TEP 75-2418WI 48 VDC 1.6 A 88 % TEP 75-4811WI 5.0 VDC 15 A 90 % TEP 75-2416WI TEP 75-4812WI 12 VDC 6.3 A 90 % TEP 75-4813WI 18 – 75 VDC 15 VDC 5.0 A 89 % TEP 75-4815WI (48 VDC nominal) 24 VDC 3.2 A 88 % TEP 75-4816WI 28 VDC 2.7 A 88 % TEP 75-4818WI 48 VDC 1.6 A 87 % TEP 75-7211WI 5.0 VDC 15 A 91 % TEP 75-7212WI 12 VDC 6.3 A 91 % TEP 75-7213WI 43 – 160 VDC 15 VDC 5.0 A 91 % TEP 75-7215WI (72 VDC nominal) 24 VDC 3.2 A 90 % TEP 75-7216WI 28 VDC 2.7 A 90 % TEP 75-7218WI 48 VDC 1.6 A 90 % Models with 3.3 VDC /~ 20 A on demand Models with input voltage range 43 – 160 VDC Negative (passive = Off) Remote On/Off function (standard is passive = On) http://www.tracopower.com Page 1 of 6 PDF
Документация на серию TEP75WI 

Дата модификации: 14.12.2012

Размер: 568.7 Кб

6 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.