TEQ 40-7225WIR

TRACO
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing...
развернуть ▼ свернуть ▲
Внешний вид серии TEQ 40WIR

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит КЗ, перегрузка, перенапряжение
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
КПД
Напряжение изоляции вход-выход
Размер 103×57.2×26.1 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 6

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- TEN 40-4825E (TRACO)
 
— — — — — — — — — —
A- TEN 40-4825WIE (TRACO)
 
— — — — — — — — — —
A- TEN 40-4825WIR (TRACO)
 
2X1INCH 3 шт короткого замыкания, перенапряжения, перегрева — — — — — — — Защита от КЗ: продолжительная с автовосстановлением
A- TEQ 40-4825WIR (TRACO)
 
— КЗ, перегрузка, перенапряжение — — — — — — — — —
A- TEN 60-4825WIR (TRACO)
 
— — — — — — — — — —
A- TEN 60-7225WIR (TRACO)
 
— — — — — — — — — —

Файлы 2

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converter TEQ 40WIR Series, 40 Watt • High power block with excellent thermal convection • • • Operating temperature -40°C to +92°C • • • • • Excellent efficiency up to 91% • Output LED indicator Ultra wide 4:1 input voltage range EN 50155 approval for railway applications Input filter meet EN 55022, class B I/O isolation up to 2121 VAC Under voltage lock-out circuit Protection against overvoltage, overtemperature and short circuit UL 62368-1 IEC 62368-1 UL 60950-1 IEC 60950-1 The TEQ 40WIR Series is a family of isolated high performance DC/DC converter modules with ultra-wide 4:1 input voltage ranges which come in a rugged metal case. These converters are suitable for a wide range of applications, but the product is designed particularly also for industrial applications where often no PCB mounting is possible but the module has to be mounted on a chassis. A very high efficiency and the heatsink construction allows an operating temperature up to +83°C with natural convection cooling without power derating and up to +92°C with power derating. Further features include under voltage lockout, over temperature protection and short circuit protection. Models Order Code Input Voltage Range TEQ 40-2411WIR TEQ 40-2412WIR TEQ 40-2413WIR TEQ 40-2415WIR TEQ 40-2422WIR TEQ 40-2423WIR TEQ 40-2425WIR TEQ 40-4811WIR TEQ 40-4812WIR TEQ 40-4813WIR TEQ 40-4815WIR TEQ 40-4822WIR TEQ 40-4823WIR TEQ 40-4825WIR TEQ 40-7211WIR TEQ 40-7212WIR TEQ 40-7213WIR TEQ 40-7215WIR TEQ 40-7222WIR TEQ 40-7223WIR TEQ 40-7225WIR www.tracopower.com 9.5 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) 43 - 160 VDC (110 VDC nom.) Output 1 Output 2 Vnom Imax 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC +24 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC +24 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC +24 VDC 8'000 mA 3'330 mA 2'670 mA 1'670 mA 1'670 mA 1'330 mA 830 mA 8'000 mA 3'330 mA 2'670 mA 1'670 mA 1'670 mA 1'330 mA 830 mA 8'000 mA 3'330 mA 2'670 mA 1'670 mA 1'670 mA 1'330 mA 830 mA December 11, 2020 Vnom Efficiency Imax –12 VDC –15 VDC –24 VDC 1'670 mA 1'330 mA 830 mA –12 VDC –15 VDC –24 VDC 1'670 mA 1'330 mA 830 mA –12 VDC –15 VDC –24 VDC 1'670 mA 1'330 mA 830 mA typ. 90 % 91 % 91 % 90 % 89 % 89 % 90 % 90 % 91 % 91 % 90 % 89 % 89 % 90 % 88 % 90 % 90 % 89 % 88 % 88 % 90 % Page 1 / 4 PDF
Документация на серию TEQ 40WIR 

TEQ 40WIR Datasheet 40 Watt DC/DC module, railway, 4:1 input, Chassis mount, Rugged design, increased shock and vibration resistance, with EMI Filter, encapsulated, high power block

Дата модификации: 11.12.2020

Размер: 995.9 Кб

4 стр.

    Публикации 0

    показать свернуть

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DCWN06B-12 (MW)