TES 1-1210V

DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 1; U вх: 10.8...13.2 В; Выход: 3.3 В; Защита: короткого замыкания
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
Напряжение изоляции вход-выход
Размер 16.3×11×8 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
A- TEC 2-0910 (TRACO) 3 шт
A- R1D12-123.3/H (RECOM) SMD1210
A- F1203S-1WR3 (MORNSUN) в линейках 50 шт
A- B1203LS-1WR3 (MORNSUN) в линейках 200 шт
A- B1203S-1WR3 (MORNSUN) в линейках 100 шт
A- PSD-123R3ELF (PEAK) SMD8 в линейках 15 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD8; P вых: 1 Вт; #: 1; U вх: 10.8...
A- DCR011203P (TI) DIP2410 20 шт DC-DC модульный преобразователь - Монтаж: на плату, PDIP-10; P вых: 1 Вт; #: 1; U вх: 1... короткого замыкания, перегрева Модульный миниатюрный DC/DC преобразователь
A- DCR011203U (TI) SOP12 в линейках 28 шт
короткого замыкания, перегрева Модульный миниатюрный DC/DC преобразователь
A- DCR011203U/1K (TI) TSSOP12 1000 шт
Модульный миниатюрный DC/DC преобразователь
A- DCR011203UE4 (TI) TSSOP12 28 шт
Модульный миниатюрный DC/DC преобразователь
A- TDN 1-2410WI (TRACO) в линейках 7 шт
A- TRV 1-1210M (TRACO) SIP9
A- TRV 1-1510M (TRACO) SIP9
A- K7803-500R3-LB (MORNSUN) 1 шт
A- TMV 1203SHI (TRACO) SIP7 20 шт
A- TEC 2-1210 (TRACO) 10 шт
A- TEC 2-2410WI (TRACO) в линейках 2 шт
A- TDL 2-0510 (TRACO)
A- TDL 2-1210 (TRACO)
A- A1203S-1WR3 (MORNSUN) SIP76
A- E1203S-1WR3 (MORNSUN) SIP76
A- F1203N-1WR3 (MORNSUN)
A- WRF1203S-1WR2 (MORNSUN) SIP87 в линейках 10 шт
A- K7803JT-500R3 (MORNSUN)

Файлы 3

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TES 1V Series, 1 Watt Features ◆ Small SMD package with standard footprint ◆ ◆ ◆ ◆ I/O isolation voltage 3000 VDC Single- and dual output models High efficiency up to 80% Operating temperature range –40°C to +85°C ◆ High accuracy of pin co-planarity ◆ Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D ◆ Available in tape and reel package ◆ 3-year product warranty The TES-1V series are miniature, 1W DC/DC-converters with high isolation in a SMD package. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. With the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrial- and telecom field. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Output voltage Output current max. Efficiency typ. TES 1-0510V Order code 3.3 VDC 260 mA 72 % TES 1-0511V 5.0 VDC 200 mA 75 % 12 VDC 84 mA 79 % 15 VDC 67 mA 80 % TES 1-0512V TES 1-0513V TES 1-0521V Input voltage 5 VDC ±10% (nominal 5 VDC) ±5 VDC ±100 mA 75 % TES 1-0522V ±12 VDC ±42 mA 79 % TES 1-0523V ±15 VDC ±34 mA 80 % TES 1-1210V 3.3 VDC 260 mA 73 % TES 1-1211V 5.0 VDC 200 mA 76 % TES 1-1212V 12 VDC 84 mA 80 % 15 VDC 67 mA 81 % ±5 VDC ±100 mA 76 % TES 1-1222V ±12 VDC ±42 mA 80 % TES 1-1223V ±15 VDC ±34 mA 80 % TES 1-2410V 3.3 VDC 260 mA 70 % TES 1-2411V 5.0 VDC 200 mA 73 % 12 VDC 84 mA 79 % 15 VDC 67 mA 79 % TES 1-1213V TES 1-1221V TES 1-2412V TES 1-2413V TES 1-2421V 12 VDC ±10% (nominal 12 VDC) 24 VDC ±10% (nominal 24 VDC) ±5 VDC ±100 mA 73 % TES 1-2422V ±12 VDC ±42 mA 79 % TES 1-2423V ±15 VDC ±34 mA 79 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию TES1V 

Дата модификации: 23.07.2012

Размер: 275.9 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.