TES 1-2421V

TRACO
DC/DC Converters TES 1 Series, 1 Watt Features ◆ Small SMD package with standard footprint ◆ I/O isolation 1500 VDC ◆ Unregulated device ◆ Single and dual output models ◆ Input voltage 5, 12 and 24 VDC ◆ High efficiency up to 80% ◆ Operating temperature range –40°C to +90°C ◆ High accuracy of pin co-planarity ◆ Qualified for leadfree reflow solder With their small footprint these 1Watt DC/D...
развернуть ▼ свернуть ▲
Фотография серии TES1V

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
Уровень пульсаций
КПД
Схема параллельного включения
Напряжение изоляции вход-выход
Сертификаты медицинские
Размер 16.3×11×8 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 16

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- A2405S-1WR3 (MORNSUN)
 
— 1 шт — — — — — — —
A- DPU01N-05 (MW)
 
— — — — — — — —
A- MDD01N-05 (MW)
 
SIP7 11 шт — — — — — — —
A- DETN01N-05 (MW)
 
— — — — — — — —
A- G2405S-1WR2 (MORNSUN)
 
SIP76 — — — — — — —
A- E2405S-1WR3 (MORNSUN)
 
— в линейках 50 шт — — — — — — —
A- G2405S-1WR3 (MORNSUN)
 
— — — — — — — — — —
A- E2405XT-1WR3 (MORNSUN)
 
— в линейках 50 шт — — — — — — —
A- G2405WS-1WR3 (MORNSUN)
 
— — — — — — — — —
A- WRE2405S-1WR2 (MORNSUN)
 
SIP87 — — — — — — —
A- WRA2405S-1WR2 (MORNSUN)
 
SIP87 1 шт — — — — — — —
A- A2405XT-1WR3 (MORNSUN)
 
— в линейках 50 шт — — — — — — —
A- UWE1205S-1WR3 (MORNSUN)
 
— 1 шт — — — — — — —
A- TBA 1-2421HI (TRACO)
 
— 1 шт — — — — — — — — —
A- RSO-2405DZ (RECOM)
 
SIP87 — — — — — — — — —
A- RB-2405D (RECOM)
 
SIP7 в линейках 25 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 23.7... — — — — — — — — — —

Файлы 4

показать свернуть
DC/DC Converters TES 1 Series, 1 Watt Features ◆ Small SMD package with standard footprint ◆ I/O isolation 1500 VDC ◆ Unregulated device ◆ Single and dual output models ◆ Input voltage 5, 12 and 24 VDC ◆ High efficiency up to 80% ◆ Operating temperature range –40°C to +90°C ◆ High accuracy of pin co-planarity ◆ Qualified for leadfree reflow solder With their small footprint these 1Watt DC/DC converters are an ideal and economical solution for many applications where an isolated voltage is required. Typical ap- process according IPC/JEDEC J-STD-020C plications are ground loop elimination, noise reduction, voltage isolation in digital ◆ Available in tape and reel package ◆ 3-year product warranty interfaces and voltage conversion in distributed power systems. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Order code Input voltage Output voltage Output current max. Efficiency typ. TES 1-0510 3.3 VDC 300 mA 73 % TES 1-0511 5 VDC 200 mA 78 % TES 1-0519 9 VDC 110 mA 78 % TES 1-0512 5 VDC ±10% 12 VDC 85 mA 78 % TES 1-0513 (nominal 5 VDC) 15 VDC 65 mA 79 % ±5 VDC ±100 mA 74 % TES 1-0522 ±12 VDC ±40 mA 78 % TES 1-0523 ±15 VDC ±35 mA 78 % TES 1-1211 5 VDC 200 mA 76 % TES 1-1219 9 VDC 110 mA 78 % 12 VDC 85 mA 79 % TES 1-0521 TES 1-1212 TES 1-1213 12 VDC ±10% (nominal 12 VDC) 15 VDC 65 mA 80 % ±5 VDC ±100 mA 74 % TES 1-1222 ±12 VDC ±40 mA 78 % TES 1-1223 ±15 VDC ±35 mA 79 % TES 1-2411 5 VDC 200 mA 78 % TES 1-2419 9 VDC 110 mA 77 % TES 1-2412 12 VDC 85 mA 77 % 15 VDC 65 mA 79 % ±5 VDC ±100 mA 73 % TES 1-2422 ±12 VDC ±40 mA 78 % TES 1-2423 ±15 VDC ±35 mA 78 % TES 1-1221 TES 1-2413 TES 1-2421 http://www.tracopower.com 24 VDC ±10% (nominal 24 VDC) Page 1 of 4 PDF
Документация на TES 1-0510 

Дата модификации: 06.10.2021

Размер: 351 Кб

4 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TES 1V Series, 1 Watt Features ◆ Small SMD package with standard footprint ◆ ◆ ◆ ◆ I/O isolation voltage 3000 VDC Single- and dual output models High efficiency up to 80% Operating temperature range –40°C to +85°C ◆ High accuracy of pin co-planarity ◆ Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D ◆ Available in tape and reel package ◆ 3-year product warranty The TES-1V series are miniature, 1W DC/DC-converters with high isolation in a SMD package. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. With the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrial- and telecom field. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Output voltage Output current max. Efficiency typ. TES 1-0510V Order code 3.3 VDC 260 mA 72 % TES 1-0511V 5.0 VDC 200 mA 75 % 12 VDC 84 mA 79 % 15 VDC 67 mA 80 % TES 1-0512V TES 1-0513V TES 1-0521V Input voltage 5 VDC ±10% (nominal 5 VDC) ±5 VDC ±100 mA 75 % TES 1-0522V ±12 VDC ±42 mA 79 % TES 1-0523V ±15 VDC ±34 mA 80 % TES 1-1210V 3.3 VDC 260 mA 73 % TES 1-1211V 5.0 VDC 200 mA 76 % TES 1-1212V 12 VDC 84 mA 80 % 15 VDC 67 mA 81 % ±5 VDC ±100 mA 76 % TES 1-1222V ±12 VDC ±42 mA 80 % TES 1-1223V ±15 VDC ±34 mA 80 % TES 1-2410V 3.3 VDC 260 mA 70 % TES 1-2411V 5.0 VDC 200 mA 73 % 12 VDC 84 mA 79 % 15 VDC 67 mA 79 % TES 1-1213V TES 1-1221V TES 1-2412V TES 1-2413V TES 1-2421V 12 VDC ±10% (nominal 12 VDC) 24 VDC ±10% (nominal 24 VDC) ±5 VDC ±100 mA 73 % TES 1-2422V ±12 VDC ±42 mA 79 % TES 1-2423V ±15 VDC ±34 mA 79 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию TES1V 

Дата модификации: 23.07.2012

Размер: 275.9 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DKA30C-15 (MW)