TES 2-0523H

DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 2 Вт; #: 2; U вх: 4.5...5.5 В; Выход: 15 В, -15 В; Защита: короткого замыкания
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 13.7×12.3×8.9 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 32

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- TEC 2-1223WI (TRACO)
A- R2D-0515/P-R (RECOM)
 
A- THI 3-0523 (TRACO) DIP2410
A- TES 2-0523M (TRACO) SMD168
A- A0515S-2WR2 (MORNSUN) SIP76 1 шт
A- RD-0515D (RECOM) SIP7 25 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 2 Вт; #: 2; U вх: 4.5....
A- TEN 3-0523 (TRACO) DIP-24 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 2; U вх: 4.5... короткого замыкания, перенапряжения, перегрева Защита от КЗ: продолжительная с автовосстановлением
A- TEC 2-0923 (TRACO)
A- TDR 3-0523SM (TRACO) SMD148 1 шт
A- R2D-0515/P (RECOM) SMD8
 
A- R2D-0515/HP-R (RECOM)
 
A- R2D-0515/HP (RECOM)
 
A- R2D-0515/H-R (RECOM)
 
A- R2D-0515/H (RECOM) SMD8
 
A- R2D-0515-R (RECOM)
 
A- R2D-0515 (RECOM) SMD8
 
A- TDR 3-0523 (TRACO) DIP-14
A- TES 2N-0523 (TRACO) SMD5 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 2 Вт; #: 2; U вх: 4.5.....
A- TDN 3-1223WI (TRACO) DIP-6
A- TDN 3-1223WISM (TRACO) SMD5
A- TEM 2-0522 (TRACO) DIP2410 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 2 Вт; #: 2; U вх: 4.5... короткого замыкания, перенапряжения, перегрева
A- TMH 0515D (TRACO) SIP7 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 2 Вт; #: 2; U вх: 4.5....
A- TEC 3-0923 (TRACO) 1 шт
A- TMR 0523 (TRACO) SIP87 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP8; P вых: 2 Вт; #: 2; U вх: 4.5.... Защита от КЗ: продолжительная с автовосстановлением
A- TEC 3-1223WI (TRACO) 2 шт
A- TMR 2-0523WISM (TRACO) SMD148
A- TDR 2-0523 (TRACO) DIP-14 50 шт
A- TDR 2-0523SM (TRACO) SMD148
A- TMR 2-1223WIN (TRACO) SIP87 короткого замыкания, перегрузка
A- TDR 2-1223WI (TRACO) DIP-14
A- TDR 2-1223WISM (TRACO) SMD148
A- TMV 2-0515DHI (TRACO) SIP76
 

Файлы 3

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TES 2H Series, 2 Watt Features ◆ Small SMD package with standard footprint ◆ ◆ ◆ ◆ ◆ I/O isolation voltage 1500 VDC Single and dual output models Input voltage 5, 12 and 24 VDC High efficiency up to 80 % Operating temperature range –40 to +85°C ◆ High accuracy of pin co-planarity ◆ Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D ◆ Available in tape and reel package ◆ 3-year product warranty With their small footprint these 2 Watt DC/DC converters are an ideal and economical solution for many applications where an isolated voltage is required. Typical applications are ground loop elimination, noise reduction, voltage isolation in digital interfaces and voltage conversion in distributed power systems. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Ordercode Input voltage TES 2-0510H TES 2-0511H Output voltage Output current max. Efficiency typ. 3.3 VDC 500 mA 70 % 5 VDC 400 mA 73 % TES 2-0512H 5 VDC ±10% 12 VDC 165 mA 77 % TES 2-0521H (5 VDC nominal) ±5 VDC ±200 mA 74 % TES 2-0522H ±12 VDC ±83 mA 76 % TES 2-0523H ±15 VDC ±66 mA 76 % TES 2-1210H 3.3 VDC 500 mA 72 % 5 VDC 400 mA 75 % 12 VDC 165 mA 79 % ±12 VDC ±83 mA 80 % TES 2-1211H TES 2-1212H TES 2-1222H 12 VDC ±10% (12 VDC nominal) TES 2-1223H ±15 VDC ±66 mA 80 % TES 2-2410H 3.3 VDC 500 mA 72 % 5 VDC 400 mA 75 % 12 VDC 165 mA 79 % TES 2-2411H TES 2-2412H TES 2-2422H TES 2-2423H http://www.tracopower.com 24 VDC ±10% (24 VDC nominal) ±12 VDC ±83 mA 79 % ±15 VDC ±66 mA 79 % Page 1 of 4 PDF
Документация на серию TES2H 

datasheet

Дата модификации: 14.03.2014

Размер: 238 Кб

4 стр.

DC/DC Converters TES 2H Series, 2 Watt Features ◆ Small SMD package with standard footprint ◆ ◆ ◆ ◆ ◆ I/O isolation voltage 1500 VDC Single and dual output models Input voltage 5, 12 and 24 VDC High efficiency up to 80 % Operating temperature range –40 to +85°C ◆ High accuracy of pin co-planarity ◆ Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D ◆ Available in tape and reel package ◆ 3-year product warranty With their small footprint these 2 Watt DC/DC converters are an ideal and economical solution for many applications where an isolated voltage is required. Typical applications are ground loop elimination, noise reduction, voltage isolation in digital interfaces and voltage conversion in distributed power systems. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Ordercode Input voltage TES 2-0510H TES 2-0511H Output voltage Output current max. Efficiency typ. 3.3 VDC 500 mA 70 % 5 VDC 400 mA 73 % TES 2-0512H 5 VDC ±10% 12 VDC 165 mA 77 % TES 2-0521H (5 VDC nominal) ±5 VDC ±200 mA 74 % TES 2-0522H ±12 VDC ±83 mA 76 % TES 2-0523H ±15 VDC ±66 mA 76 % TES 2-1210H 3.3 VDC 500 mA 72 % 5 VDC 400 mA 75 % 12 VDC 165 mA 79 % ±12 VDC ±83 mA 80 % TES 2-1223H ±15 VDC ±66 mA 80 % TES 2-2410H 3.3 VDC 500 mA 72 % 5 VDC 400 mA 75 % 12 VDC 165 mA 79 % ±12 VDC ±83 mA 79 % ±15 VDC ±66 mA 79 % TES 2-1211H TES 2-1212H TES 2-1222H TES 2-2411H TES 2-2412H TES 2-2422H TES 2-2423H http://www.tracopower.com 12 VDC ±10% (12 VDC nominal) 24 VDC ±10% (24 VDC nominal) Page 1 of 4 PDF
Документация на серию TES2H 

tes2n

Дата модификации: 23.07.2012

Размер: 286.9 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.