THI 3-0522

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
КПД
Напряжение изоляции вход-выход
Размер 31.8×20.3×10.5 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 39

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- TEL 3-0522 (TRACO) DIP-24 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 2; U вх: 4.5... Защита от КЗ: продолжительная с автовосстановлением. Опция - металлический корпус
A- REC3-0512DRW/H2/A/CTRL (RECOM)
 
A- TDN 3-1222WI (TRACO) DIP-6 в линейках 10 шт
A- REC3-0512DRW/H/B/M (RECOM)
 
A- REC3-0512DR/H1 (RECOM) DIP2410 в линейках 15 шт
 
A- REC3-0512DR/H1/M (RECOM)
 
A- REC3-0512DRW/H/B (RECOM) DIP2410
 
A- REC3-0512DRW/H2/A (RECOM) DIP2410 в линейках 15 шт
 
A- REC3-0512DRW/H4/C/M (RECOM)
 
A- REC3-0512DRW/H2/A/M (RECOM)
 
A- REM3-0512D/A/CTRL (RECOM)
A- REC3-0512DRW/H2/A/M/CTRL (RECOM)
 
A- REC3-0512DRW/H2/C (RECOM)
 
A- REC3-0512DRW/H2/C/M (RECOM)
 
A- REC3-0512DRW/H4/A (RECOM) DIP2410
 
A- REC3-0512DRW/H4/A/CTRL (RECOM)
 
A- REC3-0512DRW/H4/A/M (RECOM)
 
A- REC3-0512DRW/H4/A/M/CTRL (RECOM)
 
A- REM3-0512D/C (RECOM)
A- REM3-0512D/A (RECOM)
A- TEC 3-1222WI (TRACO)
A- TDN 5-0922WI (TRACO) DIP-6
A- TMR 3-0522 (TRACO) SIP87 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP8; P вых: 3 Вт; #: 2; U вх: 4.5.... Защита от КЗ: продолжительная с автовосстановлением
A- THB 3-0522 (TRACO) DIP-24 в линейках 10 шт
A- TMR 3-0522E (TRACO) SIP87 1 шт
 
A- TMR 3-0522HI (TRACO) SIP87
A- TEC 3-0922 (TRACO)
A- TMR 3-1222WI (TRACO) SIP87 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP8; P вых: 3 Вт; #: 2; U вх: 4.5.... Защита от КЗ: продолжительная с автовосстановлением
A- TMR 3-1222WIE (TRACO) SIP87
A- TDN 5-0922WISM (TRACO) SMD5
A- DCWN03E-12 (MW) 5 шт короткого замыкания, перегрузки, перенапряжения
A- TDN 3-1222WISM (TRACO) SMD5 в линейках 10 шт
A- TDR 3-0522 (TRACO) DIP-14 1 шт
A- TDR 3-0522SM (TRACO) SMD148 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 3 Вт; #: 2; U вх: 4.5..... ±
A- TEN 3-0522 (TRACO) DIP-24 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 2; U вх: 4.5... Защита от КЗ: продолжительная с автовосстановлением
A- TEN 3-0522N (TRACO) DIP2410
A- TDR 3-1222WI (TRACO) DIP-14
A- TDR 3-1222WISM (TRACO) SMD148 1 шт
A- REC3-0512DRW/H4/C (RECOM)
 

Файлы 2

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THI 3 Series, 3 Watt CB Scheme Features ◆ Supplementary and reinforced insulation ◆ I/O isolation 4000 VACrms rated for IEC 60950-1 IEC 60601-1 ES 60601-1 300 VACrms working voltage ◆ 2 x MOOP medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition ◆ Industrial safety to IEC/EN 60950-1 ◆ Fully regulated output voltage ◆ Input filter meets EN 55022, class A and FCC, level A ◆ Operating temp. range –40°C to +75°C ◆ Low leakage current ◆ Low coupling capacitance ◆ Short circuit protection ◆ 3-years product warranty The THI 3 series is a new range of high isolation DC/DC converters with a reinforced insulation system. The I/O- isolation voltage is specified for 4000VACrms. The circuit is encapsulated in a DIP-24 package. There are 15 models available for 5, 12 and 24VDC input voltage and single or dual output voltage. The THI-3 DC/DC converters offer a cost effective solution for applications in industrial controls and medical instrumentation requiring a certified supplementary or reinforced insulation system to comply with industrial or latest medical safety standards. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THI 3-0511 5 VDC 600 mA 60 % THI 3-0512 12 VDC 250 mA 62 % THI 3-0513 15 VDC 200 mA 62 % THI 3-0522 ±12 VDC ±125 mA 60 % THI 3-0523 ±15 VDC ±100mA 60 % THI 3-1211 5 VDC 600 mA 60 % THI 3-1212 12 VDC 250 mA 62 % THI 3-1213 5.0 VDC ± 10% 15 VDC 200 mA 62 % THI 3-1222 12.0 VDC ± 10% ±12 VDC ±125 mA 60 % THI 3-1223 ±15 VDC ±100 mA 60 % THI 3-2411 5 VDC 600 mA 60 % 12 VDC 250 mA 64 % 15 VDC 200 mA 64 % THI 3-2422 ±12 VDC ±125 mA 60 % THI 3-2423 ±15 VDC ±100 mA 60 % THI 3-2412 THI 3-2413 http://www.tracopower.com 24 VDC ± 10% Page 1 of 3 PDF
Документация на серию THI 3 

Datasheet

Дата модификации: 13.07.2018

Размер: 208 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.