THN 15-2412WI

TRACO
DC/DC конвертор: 15 Вт; корпус PCB 1x1 inch; выход 12В @ 1.3А; вход: 9...36 [24] В; -40...85 °C; изоляция вх-вых: 1.5 кВ
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности дистанционные вкл./выкл., регулировка выхода
Комплекс защит короткого замыкания, перенапряжения
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 25.4×25.4×9.9 мм
Рабочая температура
Примечания Защита от КЗ: продолжительная с автовосстановлением
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 41

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
P= URB2412YMD-15WR3 (MORNSUN)
 
в линейках 3 шт
 
A- MDS20C-12 (MW)
 
в линейках 18 шт
A- THN 20-2412WI (TRACO)
 
в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 1x1 inch; P вых: 20 Вт; #: 1; U вх:... короткого замыкания, перенапряжения Защита от КЗ: продолжительная с автовосстановлением
A- URA2412YMD-15WR3 (MORNSUN)
 
в линейках 48 шт
 
A- URA2412YMD-20WR3 (MORNSUN)
 
 
A- THN 15-2412WIR (TRACO)
 
2 шт дистанционные вкл.,/выкл., регулируемый выход
A- THN 15-2422WI (TRACO)
 
1 шт DC-DC модульный преобразователь - Монтаж: на плату, 1x1 inch; P вых: 15 Вт; #: 2; U вх:... дистанционные вкл./выкл., регулировка выхода короткого замыкания, перенапряжения DC/DC CONVERTER, 12V, 15W; DC / DC Converter O/P Type:Fixed; No. of Outputs:2; Input Voltage:9V to 36V; Power Rating:15W; Output Voltage:12V; Output Current:625mA; Output Voltage 2:-12V; Output Current 2:-625mA ;RoHS Compliant: Yes
A- THN 15-2422WIR (TRACO)
 
дистанционные вкл.,/выкл., регулируемый выход
A- THN 20-2422WIR (TRACO)
 
короткого замыкания, перегрузки, перенапряжения
A- RP15-2412DAW (RECOM)
 
1 шт
 
A- DDR-15L-12 (MW)
 
в коробках 80 шт КЗ, переполюсовки, пониженного входного напряжения
A- RP15-2412DAW-HC (RECOM)
 
2"x1"(stand)
 
A- RP15-2412SAW (RECOM)
 
2 шт
 
A- RP20-2412DAW/N (RECOM)
 
в линейках 8 шт
 
A- RP20-2412SAW (RECOM)
 
 
A- RPA20-2412DAW (RECOM)
 
 
A- RPA20-2412DAW/P (RECOM)
 
 
A- RPA20-2412SAW (RECOM)
 
 
A- RPA20-2412SAW/P (RECOM)
 
 
A- N7812-1C (MW)
 
в линейках 100 шт короткого замыкания, перегрева, перегрузки
A- N7812-1PH (MW)
 
100 шт на плату, SIP3 открытый, угловой короткого замыкания, перегрева, перегрузки
A- URB4812YMD-20WR3 (MORNSUN)
 
в линейках 2 шт
A- SD-15C-12 (MW)
 
в коробках 60 шт короткого замыкания, перегрузки, перенапряжения
A- N7812-1PV (MW)
 
100 шт короткого замыкания, перегрева, перегрузки
A- NSD15-12S12 (MW)
 
2X15INCH на поддоне 30 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1.5 inch; P вых: 15 Вт; #: 1; U в... перегрузки, перенапряжения, перегрева
A- NSD15-48S12 (MW)
 
2X15INCH на поддоне 30 шт Преобразователь напряжения DC-DC на плату. 15Вт,Uвх=18-72В, Uвых=12В/1.25А,изоляция 1.5... перегрузки, перенапряжения, перегрева
A- RSDW20F-12 (MW)
 
в линейках 2 шт КЗ, перегрузка, перенапряжение, от пониженного входного напряжения
A- RSDW20UW-12 (MW)
 
2 шт КЗ, перегрузка, перенапряжение, от пониженного входного напряжения
A- SD-15A-12 (MW)
 
1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 15 Вт; #: 1; U вх: 9.2...18 ... короткого замыкания, перегрузки, перенапряжения
A- SD-15B-12 (MW)
 
1 шт короткого замыкания, перегрузки, перенапряжения
A- SD-25A-12 (MW)
 
1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 25 Вт; #: 1; U вх: 9.2...18 ... короткого замыкания, перегрузки, перенапряжения
A- URB4812YMD-15WR3 (MORNSUN)
 
в линейках 30 шт
 
A- VRB2412LD-20WR3 (MORNSUN)
 
2X1INCH в линейках 50 шт
 
A- SD-25B-12 (MW)
 
в коробках 45 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 25 Вт; #: 1; U вх: 19...36 В... короткого замыкания, перегрузки, перенапряжения
A- K7812-2000R3 (MORNSUN)
 
SIP3 в линейках 300 шт
A- K7812M-1000R3 (MORNSUN)
 
SIP3 в линейках 500 шт
A- K78L12-1000R3 (MORNSUN)
 
SIP3 1 шт
A- URA2412LD-20WR3 (MORNSUN)
 
2X1INCH 1 шт
A- URB2412YMD-20WR3 (MORNSUN)
 
в линейках 20 шт
 
A- URB4812LD-20WR3 (MORNSUN)
 
2X1INCH 1 шт
 
A- VCB4812SBO-20WR3 (MORNSUN)
 
на поддоне 10 шт КЗ, перегрев, от пониженного входного напряжения

Файлы 4

показать свернуть
DC/DC Converter THN 15WI Series, 15 Watt • Smallest encapsulated 15 W Converter! Ultra compact size: 1.0" x 1.0" x 0.4" • Shielded metal case with isolated baseplate • Ultrawide 4:1 input ranges: 9-36 VDC or 18-75 VDC • • Output voltage Trim • • • I/O isolation voltage 1500 VDC • • Remote On/Off control UL 62368-1 IEC 62368-1 5 Vout models with trim up to 6 VDC ideal for LDO applications Very high efficiency up to 87% Operating temp. range: –40°C to +85°C 3-year product warranty The THN 15WI series is the latest generation of high performance DC/DC converter modules setting new standards concerning power density. This product with 15 W comes in a encapsulated, shielded metal package with dimensions of only 1.0" x 1.0" x 0.4" and occupies 50% (!) less board space. All models have ultra wide 4:1 input voltage range and precisely regulated output voltages. Advanced circuit design provides high efficiency up to 87% which allows an operating temperature range of –40°C to +85°C (with derating) Further features include remote On/Off and trimmable output. Typical applications for these converters are battery operated equipment, mobile instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on PCB is critical. Models Order Code Input Voltage Range THN 15-2410WI THN 15-2411WI THN 15-2411WI-A1 THN 15-2412WI THN 15-2413WI THN 15-2415WI THN 15-2421WI THN 15-2422WI THN 15-2423WI THN 15-2425WI THN 15-4810WI THN 15-4811WI THN 15-4811WI-A1 THN 15-4812WI THN 15-4813WI THN 15-4815WI THN 15-4821WI THN 15-4822WI THN 15-4823WI THN 15-4825WI 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC +24 VDC 3.3 VDC 5 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC +24 VDC 4'000 mA 3'000 mA 3'000 mA 1'300 mA 1'000 mA 625 mA 1'500 mA 625 mA 500 mA 315 mA 4'000 mA 3'000 mA 3'000 mA 1'300 mA 1'000 mA 625 mA 1'500 mA 625 mA 500 mA 315 mA Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC –24 VDC 1'500 mA 625 mA 500 mA 315 mA –5 VDC –12 VDC –15 VDC –24 VDC 1'500 mA 625 mA 500 mA 315 mA typ. 86 % 86 % 86 % 87 % 87 % 90 % 85 % 87 % 88 % 91 % 86 % 87 % 87 % 87 % 87 % 91 % 85 % 86 % 87 % 91 % Options THN-HS1 Note - Optional Heat Sink: www.tracopower.com/products/thn-hs1.pdf - Suffix -A1: Adjustable output up to 6 VDC, suitable for low ripple & noise applications in conjunction with an LDO regulator. - ±24 Vout models: The output can also be used in serial circuit for single 48 VDC operation. www.tracopower.com September 17, 2021 Page 1 / 4 PDF
Документация на THN 15-2410WI 

THN 15WI Datasheet 15 Watt DC/DC converter, industrial, 4:1 input, encpasulated, 1" x 1" metal package

Дата модификации: 17.09.2021

Размер: 871.9 Кб

4 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THN 15WI Series, 15 Watt CB Scheme Features ◆ Smallest encapsulated 15W Converter! UL 60950-1 UL 60950-1 Ultra compact size: 1.0” x 1.0” x 0.4” ◆ Shielded metal case with isolated baseplate ◆ Ultrawide 4:1 input ranges 9-36 VDC or 18-75VDC ◆ ◆ ◆ ◆ ◆ ◆ ◆ Output voltage Trim I/O isolation voltage 1500 VDC Very high efficiency up to 87% Operating temp. range : –40°C to +85°C Remote On/Off control Industry standard pinout 3-year product warranty The THN-15WI series is the latest generation of high performance dc-dc converter modules setting new standards concerning power density. This product with 15W comes in a encapsulated, shielded metal package with dimensions of only 1.0”x 1.0”x 0.4” and occupies 50% (!) less board space. All models have ultra wide 4:1 input voltage range and precisely regulated output voltages. Advanced circuit design provides high efficiency up to 87% which allows a operating temperature range of –40°C to +85°C (with derating) Further features include remote On/Off and trimmable output. Typical applications for these converters are battery operated equipment, mobile instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on PCB is critical. Models Output voltage Output current max. Efficiency typ. THN 15-2410WI Order code Input voltage range 3.3 VDC 4‘000 mA 86 % THN 15-2411WI 5.0 VDC 3‘000 mA 86 % THN 15-2412WI 9 – 36 VDC 12 VDC 1‘300 mA 87 % THN 15-2413WI (24 VDC nominal) 15 VDC 1’000 mA 87 % THN 15-2421WI ±5 VDC ±1’500 mA 85 % THN 15-2422WI ±12 VDC ±625 mA 87 % THN 15-2423WI ±15 VDC ±500 mA 88 % THN 15-4810WI 3.3 VDC 4‘000 mA 86 % THN 15-4811WI 5.0 VDC 3‘000 mA 86 % THN 15-4812WI 18 – 75 VDC 12 VDC 1‘300 mA 87 % THN 15-4813WI (48 VDC nominal) 15 VDC 1’000 mA 87 % THN 15-4821WI ±5 VDC ±1’500 mA 85 % THN 15-4822WI ±12 VDC ±625 mA 86 % THN 15-4823WI ±15 VDC ±500 mA 87 % http://www.tracopower.com Page 1 of 4 PDF
Документация на серию THN15WI 

THN15WI

Дата модификации: 20.04.2012

Размер: 232.4 Кб

4 стр.

DC/DC Converters THN 15WI Series, 15 Watt CB Scheme Features ◆ Smallest encapsulated 15W Converter! UL 60950-1 UL 60950-1 Ultra compact size: 1.0” x 1.0” x 0.4” ◆ Shielded metal case with isolated baseplate ◆ Ultrawide 4:1 input ranges 9-36 VDC or 18-75VDC ◆ ◆ ◆ ◆ ◆ ◆ ◆ Output voltage Trim I/O isolation voltage 1500 VDC Very high efficiency up to 87% Operating temp. range : –40°C to +85°C Remote On/Off control Industry standard pinout 3-year product warranty The THN-15WI series is the latest generation of high performance dc-dc converter modules setting new standards concerning power density. This product with 15W comes in a encapsulated, shielded metal package with dimensions of only 1.0”x 1.0”x 0.4” and occupies 50% (!) less board space. All models have ultra wide 4:1 input voltage range and precisely regulated output voltages. Advanced circuit design provides high efficiency up to 87% which allows a operating temperature range of –40°C to +85°C (with derating) Further features include remote On/Off and trimmable output. Typical applications for these converters are battery operated equipment, mobile instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on PCB is critical. Models Output voltage Output current max. Efficiency typ. THN 15-2410WI Order code Input voltage range 3.3 VDC 4‘000 mA 86 % THN 15-2411WI 5.0 VDC 3‘000 mA 86 % THN 15-2412WI 9 – 36 VDC 12 VDC 1‘300 mA 87 % THN 15-2413WI (24 VDC nominal) 15 VDC 1’000 mA 87 % THN 15-2421WI ±5 VDC ±1’500 mA 85 % THN 15-2422WI ±12 VDC ±625 mA 87 % THN 15-2423WI ±15 VDC ±500 mA 88 % THN 15-4810WI 3.3 VDC 4‘000 mA 86 % THN 15-4811WI 5.0 VDC 3‘000 mA 86 % THN 15-4812WI 18 – 75 VDC 12 VDC 1‘300 mA 87 % THN 15-4813WI (48 VDC nominal) 15 VDC 1’000 mA 87 % THN 15-4821WI ±5 VDC ±1’500 mA 85 % THN 15-4822WI ±12 VDC ±625 mA 86 % THN 15-4823WI ±15 VDC ±500 mA 87 % http://www.tracopower.com Page 1 of 4 PDF
Документация на серию THN15WI 

THN15WI

Дата модификации: 30.03.2012

Размер: 233.8 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.